Differential & Gearbox

1447 Canam G2 REAR DIFFERENTIAL RING & PINION GEAR SET
$419.99
There are a few options for kits, please verify your differential uses this style of gears before ordering!
This will only fit six mounting hole differentials.
Late G1 Early G2 Standard Rear Differential Ring 36t and Pinion 10t gear set Pinion bolt size is M10, this may be different than what you are replacing.
OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. This kit should be installed by an experienced technician.
Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4? (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16" (14mm) The pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
Add to cart Details
2 QUARTS XPS SYNTHETIC GEAR OIL Combo Pack 75-90 and 75-140
$49.99
New XPS SAE 75W-90 and 75W-140 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box 1 U.S QT 946ml per bottle Listing is for 2 Quarts. See your owners manual before ordering to make sure you order the correct weight for your Can Am Part number 779160 and 779158
Add to cart Details
2 Quarts XPS Synthetic Gear Oil SAE 75W-140
$65.98
New XPS SAE 75W-140 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box 1 U.S QT 946ml per bottle Listing is for 2 Quarts. See your owners manual before ordering to make sure you order the correct weight for your Can Am Part number 779160
Add to cart Details
2 Quarts XPS Synthetic Gear Oil SAE 75W-90
$51.98
XPS SAE 75W-90 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box. 1 U.S QT 946ml per bottle This listing is for 2 quarts See your owners manual before ordering to make sure you order the correct weight for your Can Am 779158
Add to cart Details
OUT OF STOCK

2019+ ATV Rear Differential Rebuild Kit
$445.00
New OEM 2019+ rear differential gear set, 10/36 tooth straight cut ring and pinion gear set, Timken seals, NTN or IKO pilot bearing , OEM shim kit and OEM bearings along with a new bolt and washer to retain the driveshaft. BRP claims 25% increase in load capacity on this gear set vs the spiral cut xmr final drive units (rear differentials) from 13-18 models. Fits differential part numbers: 705502808, 705502546, 705502178, 705502090 703501031 705501550 705501556 705501557
Add to cart Details
4×4 Servo ACTUATOR Motor Aftermarket
$85.00
Aftermarket Four wheel drive servo motor.
This is what engages the sliding collar putting power to the front differential.
Replaces oem 715900614 4151 29174 420891087
Add to cart Details
5280 G2 ATV Rear Differential Seal Kit
$30.00
Rear Differential Seal kit for differentials with 80mm outer diameter pinion seal
1 Pinion Seal, 80mm
2 Axle Seals, 52mm
Brands we use include : Timken, Dichtomatik and SKF
Fits:
2013 to Current Outlander 1000/1000R XMR
2015 to Current Outlander 800/850 Xmr
2016 to Current Renegade 1000R XMR
2019 to Current 650 and Larger ATVs
Also some 2019 to Current 570 XMR (measure your parts to verify fitment)
*** THIS WILL NOT WORK IN 2013-2018 650/570 XMR or 2011/2012 800 XMR machines. If you are unsure about fitment please contact us! ***
Add to cart Details
5280 Rear Differential Bearing and Seal Kit
$260.00
5280 Rear Differential Tapered Roller Bearings and Seal kit 1 Pinion Seal, 80mm outer diameter 2 Axle Seals, 52mm outer diameter 1 Thick Tapered Roller Bearing 3 Thin Tapered Roller Bearing 1 Needle Bearing These are High Quality aftermarket parts, as good or better than OEM! Brands include FAG, NTN, IKO, TIMKEN, KOYO, SKF, Dichtomatik. BRP does not sell these bearings alone, we have taken the guess work out of replacing these parts. Fits: 2019 to Current 650 and Larger ATVs 2013 to Current Outlander 1000/1000R XMR 2015 to Current Outlander 800/850 XMR 2016 to Current Renegade 1000R XMR some 2019 to Current 570 XMR (measure your parts to verify fitment) *** THIS WILL NOT WORK IN 2013-2018 650/570 XMR or 2011/2012 800 XMR machines. If you are unsure about fitment, please contact us! *** Fits differential part numbers: 705502808, 705502546, 705502178, 705502090
Add to cart Details
5280 Rear Differential Spanner Wrench Pinion Nut Tool 1/2 Drive
$45.00
NEW Spanner Wrench This is to remove and install the 705501550 nut on ATVs with the tapered roller bearing rear differentials. Also known as the XMR or 2019+ style rear diffs. Use a 20 spline yoke to retain the assembly in a vice and spin the nut off. The nut should be RH threaded
Add to cart Details
Aftermarket ATV Rear axle seal 1652
$8.99
High quality aftermarket Timken or SKF axle oil seal. Fits ATV rear differentials 2015-current, some UTV’s To be 100% sure on fitment, measure your outer diameter on your seal, it should read 52mm This seal has a 30mm inner diameter 52mm outer diamter and is 8mm thick. Replaces OEM 705501556 Order qty two per machine.
Add to cart Details
Aftermarket XMR Rear Differential Pinion Seal
$11.49
Replaces 705501557 Pinion seal
found on G2 800 850 1000 1000R XMR rear differentials
38mm Inner Diameter
80mm Outer Diameter
8mm Thick
Brands we use include : Timken, Dichtomatik or SKF
Add to cart Details
Differential Bellow with Clamp
$9.50
New Aftermarket Bellows with clamp, use this in place of vent lines on your differentials. Replaces OEM part number: 705400352
Add to cart Details
LATE G1 / EARLY G2 Standard Rear Differential Seal Kit 1447
$30.00
Please verify your differential uses this style of seals before ordering! Can Am Rear Differential Pinion and Axle Seals (Timken or SKF) Fit on most 2006-2013 Outlanders and Renegades The Pinion Seal has a 70mm Outer Diameter And the standard 37mm inner diameter. The Axle Seal has a 47mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials Replaces OEM Numbers: 705400027 705500751 705501996 705401481
Add to cart Details
Late G2 Standard Rear Differential Seal Kit 1652
$25.00
Please verify your differential uses this style of Seals before ordering! Can Am Standard Rear Differential Pinion and Axle Seals (Timken or SKF) Please measure your parts before ordering to verify fitment. The Pinion Seal has a 70mm Outer Diameter and the standard 37mm inner diameter. Replaces part number 705401481 The Axle Seal has a 52mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials common to find in 2016 and newer ATVs or if your differential has been repalced.
Add to cart Details
MOOSE RACING CAN-AM Small Gearbox Bearing Seal Kit 1104-0021 TRANS REBUILD KIT
$209.95
Moose Racing gearbox bearing and seal kit. Part number 1104-0021 This is for small gearboxes found in Outlander and Renegade 500, 570, 650, 800, 850 and some 2015 and newer Outlander 1000’s ATV’s If you have fitment questions, please ask, we are here to help.
Add to cart Details
NEW OEM LOW RATIO LARGE SXS Style 6×6 Gearbox
$2,599.99
SHIPS FREE TO THE LOWER 48 STATES New Can Am Maverick or Commander Gear Box New Can-Am GEAR BOX this is the way to reduce the over all gear ratio on your can-am 1000 running larger tires. Current Part Number- 420686654 Replaces: 420686563, 420686562 & 420685807 NEW OEM Canam Part NOT A REBUILD, ALL NEW Brand New In The Box This is the LOW RATIO gearbox for the larger style gearbox equipped machines, please ask if you are unsure about fitment. **Top speed on our 2012 Commander 1000 is 62 mph (high range) with this gearbox and stock clutching and stock size tires** Gearbox ratios, this isn’t regurgitated info, this is us counting teeth inside of the gearbox. Ring and Pinon Gears 37/15=2.467 Intermediate 45/40=1.125 High Range 36/27=1.333 Low Range 46/17=2.706 Reverse 34/12=2.833 High Range Ratio 3.700 Low Range Ratio 7.509 Reverse Ratio 7.863
Add to cart Details
NEW 8mm Differential Breather Tube
$11.49
Differential Vent Tube 8mm diameter Part number 705501584
Add to cart Details
NEW B98 needle bearing replaces 705500261
$15.99
New IKO, Koyo or NTN brand needle bearing B98 replaces 705500261 If you are unsure on fitment please reach out to us we will help.
Add to cart Details
New G2 Standard Rear Differential Bearings and Seals Kit 1652
$138.00
SHIPS FREE TO THE LOWER 48 STATES Standard G2 Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken, SKF The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 2 1/16″ (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8″ (16mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 and newer G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential.570/650 XMR machines do not have the true XMR differential.
Add to cart Details
NEW KOYO 14MM PINION PILOT BEARING
$30.99
1447 NEW OEM Needle bearing 14x20.65x19 Size These are KOYO Bearings high quality 14mm Inner Diameter 20.65mm Outer Diameter 19mm Long Replaces OEM Part number 705501408
Add to cart Details
New Late G1 Early G2 Standard Rear Differential Bearings and Seals Kit 1447
$138.00
SHIPS FREE TO THE LOWER 48 STATES Late G1 Early G2 Standard Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
Add to cart Details
New Late G1 Early G2 Standard Rear Differential Complete Rebuild Kit 1447
$455.00
SHIPS FREE TO THE LOWER 48 STATES
Late G1 Early G2 Standard Rear Differential Rebuild Kit
There are a few options for rebuild kits, please measure your parts before ordering!!
OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured.
Paired with high quality aftermarket bearings along with double lip axle seals.
This kit should be installed by an experienced technician. Ring gear shims are included as the gears will need to be set up in your cases, the pinion shims should remain unchanged
Note: the O rings are not included, this is a cost savings measure as they are generally reusable.
There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials.
Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement.
Measure your outer diameter of your axle seals!
They should measure close to 1 3/4" (47mm)
To further verify fitment you can measure your pinion pilot shaft, this should be 9/16? (14mm)
The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
Add to cart Details
NEW Needle Bearing for XMR Rear Differential
$45.00
Replaces OEM 703500836 Japan Made Uncaged Needle Bearing 20X27X15mm Needle Bearing for XMR rear differential pinion gear
Add to cart Details
New OEM 14% Gear Reduction Set Low Gear For Large Gearbox
$377.00
SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Parts OEM 14% LOWER LOW GEAR SET for most every 1000 Vtwins minus north american 2015 and newer outlander 1000/1000R This is the way to reduce the over all Low Gear ratio on your can-am 1000 running larger tires. This is the LOW RATIO for any Large Gearbox. The last picture shows a Large gearbox. This will not fit Small Gearboxes. 14% lower gear ratio than standard 1000 gear boxes (Maverick, Commander, Renegade, Outlander) Will also fit 800 Commander
Add to cart Details

Title