NEW OEM Timing Chain Tensioner Kit Sold as a Pair, enough to do one vtwin engine. Fits: 500 570 650 800HO 800R 850 1000 1000R engines. Part numbers 711641150 420641150 420430370 420430373 290250890 420250890 711238120 420238120 420236520 420236521 711236520 711236510 420236510
30amp five pin relay OE supplier Song Chuan Replaces OE numbers 278002822 278002168 710001334 515176774 710000739 515176774
SHIPS FREE TO THE LOWER 48 STATES! Can-am NEW OEM Main bearing set. Kit includes: Main Bearing Half with Oil hole 420233965 x2 Main Bearing Half without Oil hole 420233960 x2 PTO Cover Bearing 420233995 Be sure to mark your cases before pressing them out! The oil holes need to be lined up!
Can Am Maverick front drive shaft. Has updated style yoke that does NOT require a wear ring. Genuine OEM Product. Part Number: 705402068 Replaces: 703500909 703500940 703500993 705401196 Will come as pictured.
Outer CVT cover for Turbo V twin Mavericks 1000R Best to pull your cover and visually inspect it for fitment. This cover has two holes over the primary clutch and one on the secondary. If you are unsure on fitment, please contact us! Fits: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR Will not fit Maverick X3 Part number 420212285 replaces 420212282
NEW OEM Wheel Center Cap Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
Brand New OEM Helix Cam. Fits all non-turbo Maverick and Maverick MAX from 20013-2018. Also fits 2018+ Commander 1000R & Commander MAX 1000R Part number 420280474
New Can Am Maverick 1000R Rear Differential KIT ready for your custom install. New OEM Can-Am Rear Differential New OEM Yoke Updated style that does not require a wear ring (uses standard 398 U joint) New Bolt and washer Replaces Rear differential in any Maverick/Maverick Turbo (non X3/Sport/Trail) Largest and strongest rear differential found in Can-am’s 10/36 Gear set, that is a 3.60:1 ratio, same since at least 2006 Pinion shaft 20 spline Current Part Number 705502275 Old Part Numbers 705501912 705501958
NEW Black Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121B, ALUGB14BX
NEW OEM BRP Coupler This is found on many machines, 18 spline exterior No need for a wear ring on this coupler. Part number 705401969 Replaces 703500678 705400149 705500201- Sale!
New take off gearbox side, 20 spline yoke. This fits on large gearboxes output shafts. 20 spline yoke partially machined to accept a protector ring. This is the forward most yoke on the REAR driveshaft. Works with 398 U joints. found on Vtwin rear driveshafts. Part number 715900129 replaces 705501373 and 715900234 - OUT OF STOCK
EPI roller kit Part number WE210933 The rollers in this kit were designed by The Clutch Guys to replace the stock composite rollers. They are CNC machined and hardened for a long service life. The stock composite rollers that Can Am uses tend to flat-spot very quickly, resulting in greater friction and reduced primary clutch reaction. Upgrade to these custom metal rollers for improved clutch function. The kit includes 6 custom metal rollers with bushings, 6 roller pins and 12 roller washers Replaces oem numbers: 420233893, 417223257, 420229995, 417223767, 420626230, 420626231 
Canam CVT Cover Kit Commander/Maverick 1000R
Please look at pictures to verify fitment.
This outer cover has two breather holes, one in front of the primary, one on the secondary.
This outer cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather.
Please look at pictures to verify fitment.
Fits:
Commander 1000R two seat 2018-2020
Commander 1000R MAX four seat 2018
Maverick 1000R two seat 2014-2018
Maverick 1000R MAX four seat 2014-2018Will not fit:
2015-2018 Maverick 1000R Turbo
2017-2018 Maverick 1000R XMRInner cover 420612304
Outer cover 420212286
13 Hex head CVT housing bolts 420440568
Gasket 420430126
O-rings – 420430407 and 420631087
Hex Bolts – 420440207
Also has a nut and washer – 232561434, 224061121
Nylon drain plug and clamp
NEW AFTERMARKET STARTER SPRAG VTWIN Starter Clutch One Way Bearing for Can-Am Will come as pictured Replaces OE Part Numbers:420659112 420659111 420659261 420659263 420659260
NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
NEW OEM Can-am Output Crank Shaft Seal This is the engine out put shaft seal, pressed into the crankcase PTO cover 34mm Inner Diameter 52mm Outer Diameter 8mm Thick Current Part Number 420631933 Replaces Part Number 420631932
Brand New Genuine OEM Friction Washer Goes between Ball Bearing and Spring Seat on the Drive Pulley Clutch This is needed for correct engine braking on many models, not sure if you need it, please ask! OEM Part number: 420460430
Can Am Maverick 1000R secondary spreader M25x1.5 thread size, to verify fitment 100% measure your clutch where this threads in. This works on the QRS style secondary clutches pictured. This will NOT work on the X3 models Bolt is not included Part number 708200504
Can-am Maverick Turbo Rear prop shaft from gear box to rear differential. Will fit the regular maverick turbo, the xds turbo and the xrs turbo in both 2 seat and max frame. We install the wear sleeve and guard. Current Part Number: 703500939 Previous Part Number: 703500877
Can Am Commander or Maverick Wheel Stud M10 Stud diameter 27.5mm spacing for brake rotor Part number 250300060 replaces 250300051
Brand new inner secondary clutch This inner clutch has the hole for the pig tale style spring but will work on springs without the pig tale. New OEM Part Part Numbers : 420280499 420280235 420248233 420280236 420280238 420280497
Brand New Genuine OEM Shifting cable for two passenger Canam Mavericks and Commanders WILL NOT FIT Maverick Trail/Sport or X3 WILL NOT FIT Four Seat Models Comes as pictured OEM part number 707000775
Air Pressure sensor, this goes in the Black plastic Intake manifold. Will work on any 2006 to current Can am Outlander, Renegade, Commander, Maverick, Defender 500 570 650 800 850 1000 XT XMR MAX or XXC The Manifold Absolute Pressure sensor or MAP sensor is a sensor that is attached to the intake manifold. The MAP sensor responds to changes in the intake manifold pressure (vacuum) and provides a reading of engine load. How it works is 5 volts DC is supplied to the sensor from the ECU. Inside the MAP sensor there is a resistor that moves in relation to intake manifold pressure. The resistor varies the voltage between about 1V to 4.5V (depending on engine load) and that voltage signal is returned to the PCM to indicate manifold pressure (vacuum). This signal is essential for the PCM to determine fuel delivery. Part numbers: 420874650 707000564 707000995 0 261 230 030 ALFA ROMEO 46553045 ALFA ROMEO 46533518 CHERY S21-3614021 FIAT 46553045 FIAT 77364869 FIAT 7084986 FIAT 0000046553045 FIAT 46533518 LANCIA 46533518 LANCIA 0000046553045 LANCIA 46553045 MOOSE 2120-0994 PROTON PW810694 ROTAX (BOMBARDIER-ROTAX GMBH) 874 650 SCANIA 5166434
OEM Rotax Cylinder Base gasket Fits many Canam ATV’s/UTV’s 330 400 500 650 800 1000 Unsure on fitment? Please ask! Part number 420630210
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.