BRAND NEW Can Am OEM Wheel Cap This is for a set of Four (4) Caps Part Number 705400928 There is more than one style. Please verify that this is the correct style BEFORE ordering.
White wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715000537 & 715001378
Ultra-convenient “all-in-one” oil change kit saves time and money.
Includes XPS Synthetic Blend Oil, oil filter, o-rings and washer.
900 ACE engines found in the Maverick X3 line
SAE 5W-40 4T Oil
Complete oil change kit
Part number 779260
Will not fit Vtwin applications
O-Ring, this seals the rear differential case halves together. Fits: G2 2013-18 800R/850/1000/1000R XMR and 2019+ 650 or larger rear differentials. Unsure on fitment? Please contact us before ordering we will help. Part number 705501711
NEW OEM Tool 529036302 This removes the large housing nut on G2 XMR Rear Differentials Also works on 2019 ATV Rear differential housing nuts. please note there may be some casting flare on your housing nut you may have to file to get the tool to fit, as it is a very tight fit.
New Oem Canam Pinion nut, this is spun on to the pinion gear to retain the bearings on the pinion gear of xmr differentials on ATV XMR's G2 800/850/1000/1000R This is not needed on 570 or 650 XMR models The threads are M28x1.25 Right Hand the outer diameter is 51mm Please check that this is the correct nut for your application Part number 705501550
This is the XMR 1000 rear differential found in 2013-2018 800R 850 1000/1000R XMR.
It will fit g2 bikes (500/650/800/850/1000) if you are upgrading you will need to shorten your shaft 1.75? or buy a kit from us, please see our other listings.
This differential has automotive style cut gears, tapered roller bearings, along with an overall larger gear size. There are a total of three bearings on the pinion gear giving it much more support over the standard rear differentials, this requires a shorter driveshaft, as mentioned earlier if you are swapping this in place of a standard differential.
Pinion spline count 20, standard differentials use 18 spline pinion shafts, that are smaller in diameter. If you are upgrading you will need a 20 spline end yoke to match.
In every way this is a beefier differential.
To bolt your driveshaft on this differential you will need a M10x1.25 16mm long bolt (not included)
Current part number 705503535
Old part number 705502546 705502178, 705502090
Can-am Shim Kit for XMR G2 800 or larger 2012-current Rear Differentials. Part number 703500835
Can Am OEM Upper ball joint NEW OLD STOCK Part number is 706201394
NEW OEM G1 Can Am Outlander Complete Seat Assembly. Part number 708001649 replaces 708000402, 708000507, 708000756, 715500323 Nonconforming foam issue on right hand side lower forward portion. It feels like the foam is rolled up inside of the cover. This is pictured and will go unnoticed to some. This is the G1 500 650 800 Outlander style but will install on G1 Renegade models.
New OEM Tail light assembly, with bulb, plug in and go! Fits late G1 and all G2L Outlander models. Part # 710001203
NEW Prop Shaft Low profile pair of clamps for 715900118 boot. Clamps also work for G2 front shaft boot 705401093. The last few pictures show the clamps loose, then installed nice and tight. Sold in pairs enough to do one boot.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.