SHIPS FREE TO THE LOWER 48 STATES New genuine Can-am rear prop shaft for outlander 1000 xmr. (MAX length minus 1.75”) This is an oem part, we do not cut, phase, balance or otherwise modify this shaft. It will work on 2012-14 Outlander 1000 MAX ATV's with the XMR rear differential also. 20 Spline Gearbox Yoke 20 Spline Differential Yoke Current Part number: 703500989 Previous Part number: 703500859, 705501720, 703500927
NEW AFTERMARKET STARTER SPRAG VTWIN Starter Clutch One Way Bearing for Can-Am Will come as pictured Replaces OE Part Numbers:420659112 420659111 420659261 420659263 420659260
New Genuine OEM Can Am Ignition Switch
Fits:
2016-2020 Defender
2018-2020 Maverick Trail
2019-2020 Maverick SportPart numbers 710004198 710007870
NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
Can-am Commander style Outer CVT cover belt box Please check your cover before ordering, we can help if you do not know what to look for. This is the updated 13 bolt cover with the heat shield. Fits: Commander 800R two seat 2011-2020 Commander 800R MAX four seat 2016 Commander 1000 two seat 2011-2017 Part number 420612472
Brand New Genuine OEM ignition key switch for Outlander G1 or Renegade G1 Does not require BUDS tuning to swap out, your current DESS key will turn in this. The ignition switch is just a reader of the coded key. Key sold separately. Old Part Numbers 710000728 and 710001421
NEW OEM Can-am Output Crank Shaft Seal This is the engine out put shaft seal, pressed into the crankcase PTO cover 34mm Inner Diameter 52mm Outer Diameter 8mm Thick Current Part Number 420631933 Replaces Part Number 420631932
SHIPS FREE TO THE LOWER 48 STATES 0934-3019 Moose Racing Gasket Kit Fits Outlander/Renegade 800 models. Complete kit with oil seals. Center case gasket Magneto Cover Gasket PTO Cover Gasket Two Cylinder base Gaskets Two Cylinder Head Gaskets Two Valve Cover Gaskets Water Pump Cover Seal (kit does not come with mechanical seal)
Can-am Outer CVT Cover, belt box. This is the updated 13 bolt cover. Works with 7 or 13 bolt inner covers. This will fit on any 2006-current v twin ATV, Renegade or Outlander, 500 650 800 or 1000. If you have a a stud with a nut retaining your primary clutch this cover does not have the depth needed. Many 1000R machines use a stud/nut in place of the bolt. Unsure on fitment, please ask! This will keep the water out! 13 Cover bolt holes Current Part number is: 420611397 Replaces: 420611395, 420611390, 420611391, 420611393
OEM CANAM BRP Exhuast Muffler Clamp Part Number 293650177 Fits 2.25" OD pipe
These dashes are found on many machines.
2014-2017 Maverick, Commander, Renegade and Outlander models with the Standard Digital Dash Mount This is the factory Gauge/Screen.
The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information.
It will display 0 miles, please record your current miles for your records.
Current part number: 710005087
Replaces part numbers: 710003851 710003924 710005024 710005208
SHIPS FREE TO THE LOWER 48 STATES Late G1 Early G2 Standard Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.