- OUT OF STOCK
Made in the USA Specialized ATV, made some strong, tough rods that will hold up to whatever kind of riding you like. 6061 Billet Rods with 5/8 heim joints and all the needed hardware to install. 1 year warranty from date of purchase, directly from SPATV 1 set comes with 2 tie rods and complete assembled heims and hardware. Fits G2 Outlanders and Renegades 2012+ (even the wider 2019+ machines) - OUT OF STOCK
Features:
Cable adapter and fasteners constructed of highest quality stainless steel
Gold anodized aluminum throttle lever can be operated with one finger for safer side hilling
Safety features include rubber accordion boot (keeps moisture out of cable housing) and safety pin (locks left throttle from unwanted use)
Kit includes all hardware, allen wrenches and instructions for installation in approximately 20 minutes
Part Number 12-71042
Brand Number: 007-1011A 
Fits G2 ATV's Kit includes: Four Wheel Studs, Four Lug Nuts, Four Rotor Bolts Replaces OEM numbers: 250300048 250300643 250300642 250100100 250100184 235381646
NEW OEM High-Performance Metallic Brake Pads Designed to handle demanding riding conditions with challenging braking environments One caliper set, fits front or rear calipers on G2 ATVs Part number 715900249 interchanges with 705601014
Plain bearing half 40 X 43 X 15 This fits into one side of the connecting rod. part number 420233980- Sale!
New take off gearbox side, 20 spline yoke. This fits on large gearboxes output shafts. 20 spline yoke partially machined to accept a protector ring. This is the forward most yoke on the REAR driveshaft. Works with 398 U joints. found on Vtwin rear driveshafts. Part number 715900129 replaces 705501373 and 715900234 
Black wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715001378 715001706
Specialized ATV HD Front Drive Shaft Fits G2 ATVs Replaces OEM part numbers: 705400913 705401032 Ships as pictured 25mm diameter shaft, this is huge compared to the OEM part. MADE IN USA
New Genuine OEM
Fits on: 2017-2019 Outlander and Renegades
2020 Outlander 650 STD DPS XT XMR
2020 Outlander 6×6 650 or 1000
2020 Renegade 570 XMR3 position headlight switch OFF/Low/High beam
Part number 710008837 replaces 710005070Will come as pictured
EPI roller kit Part number WE210933 The rollers in this kit were designed by The Clutch Guys to replace the stock composite rollers. They are CNC machined and hardened for a long service life. The stock composite rollers that Can Am uses tend to flat-spot very quickly, resulting in greater friction and reduced primary clutch reaction. Upgrade to these custom metal rollers for improved clutch function. The kit includes 6 custom metal rollers with bushings, 6 roller pins and 12 roller washers Replaces oem numbers: 420233893, 417223257, 420229995, 417223767, 420626230, 420626231
Replaces OEM 703500836 Japan Made Uncaged Needle Bearing 20X27X15mm Needle Bearing for XMR rear differential pinion gear
Wind deflector mounting kit with hardware. Fits Outlander Renegade & DS450. For use with OEM wind deflectors This is just the mounting kit. Part number 715001378 No wind deflectors included.
NEW AFTERMARKET STARTER SPRAG VTWIN Starter Clutch One Way Bearing for Can-Am Will come as pictured Replaces OE Part Numbers:420659112 420659111 420659261 420659263 420659260
Six Weights 12 gram each for CVtech Trailbloc Primary Part numbers: 0935-2004 0901-7104
NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
Brand New Genuine OEM ignition key switch for Outlander G1 or Renegade G1 Does not require BUDS tuning to swap out, your current DESS key will turn in this. The ignition switch is just a reader of the coded key. Key sold separately. Old Part Numbers 710000728 and 710001421
NEW OEM Can-am Output Crank Shaft Seal This is the engine out put shaft seal, pressed into the crankcase PTO cover 34mm Inner Diameter 52mm Outer Diameter 8mm Thick Current Part Number 420631933 Replaces Part Number 420631932
SHIPS FREE TO THE LOWER 48 STATES 0934-3019 Moose Racing Gasket Kit Fits Outlander/Renegade 800 models. Complete kit with oil seals. Center case gasket Magneto Cover Gasket PTO Cover Gasket Two Cylinder base Gaskets Two Cylinder Head Gaskets Two Valve Cover Gaskets Water Pump Cover Seal (kit does not come with mechanical seal)
Can-am Outer CVT Cover, belt box. This is the updated 13 bolt cover. Works with 7 or 13 bolt inner covers. This will fit on any 2006-current v twin ATV, Renegade or Outlander, 500 650 800 or 1000. If you have a a stud with a nut retaining your primary clutch this cover does not have the depth needed. Many 1000R machines use a stud/nut in place of the bolt. Unsure on fitment, please ask! This will keep the water out! 13 Cover bolt holes Current Part number is: 420611397 Replaces: 420611395, 420611390, 420611391, 420611393
SHIPS FREE TO THE LOWER 48 STATES Late G1 Early G2 Standard Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
OEM CANAM BRP Exhuast Muffler Clamp Part Number 293650177 Fits 2.25" OD pipe
NEW OEM Throttle Body Air Intake Neck Fits 850/1000 ATVs and 800R/10000 Commanders On ATV’s this connects the throttle body to the intake manifold On Commanders this connect the “Y” intake manifold to the 90* fitting Part number: 420267045
Brand New Genuine OEM Friction Washer Goes between Ball Bearing and Spring Seat on the Drive Pulley Clutch This is needed for correct engine braking on many models, not sure if you need it, please ask! OEM Part number: 420460430
SHIPS FREE TO THE LOWER 48 STATES New Throttle Handle and 4×4 Switch Current Part Number: 707000595 Old Part Numbers: 709400186 707000369- OUT OF STOCK
Moose Racing Radiator Cap Fits Outlander, Renegade, Commander, Defender and Maverick Unsure on fitment, please ask us. Cap is set to the same 15.9PSI as stock. If you current cap is not holding pressure replacing with new will help avoid overheating. Replaces OEM 709200207 709200033 
Genuine OEM Start/Stop Switch
This has the additional single light blue wire with connector.
Current Part Number: 710006134
Fits some 2019 Outlander and Renegade 1000R, 2020 Outlander and Renegade 850/1000R
Please contact us if you are not 100% sure on fitment, we will be happy to assist
NEW Genuine Can-am Rear Prop Shaft for G1 STD single seat machines WILL NOT FIT MAX. This will work with 2006-2011 500 650 800 800R, Outlander or Renegade and 2012 Outlander 500 650 or Renegade 500. The picture is what you will get. We install the wear ring and deflector ring for fast install. Current Part number: 703500801 Previous numbers: 703500767 703500719 705500816 703500704
Set of four Bronco gas shock kit for G1 Outlander 650/800 or Renegade 500/800
These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine.
*Please note these will not work in place of struts found on the Outlander 400/500 machines.
Features:
Bronco gas shocks offer long term consistent performance over stock oil only damped shocks
10% stiffer springs provide a better ride and higher load capacity
Works great on the front to better support your snowplow and on the rear when hauling cargo
Smooth black color blends perfectly on your machine
Direct bolt-on replacement: pre-installed spring allows for quicker setupP/N AU04414X4
- OUT OF STOCK
Brand new inner secondary clutch This inner clutch has the hole for the pig tale style spring but will work on springs without the pig tale. New OEM Part Part Numbers : 420280499 420280235 420248233 420280236 420280238 420280497 
Used ECM (computer) with OEM Digital Key.
This pair is tested, cleared of any codes and run on our shop ATV before leaving.
Your Dash (speedometer) may need to be paired with BUDS. If you want to start and run the machine simply unplug the dash before installing the ecu. We provide the pairing service free of charge with purchase of ECU or Dash, contact us for further details.
Only fits Generation 1 bikes Outlander and Renegade 800 HO 2006 2007 2008
Part Number: 420266374 420266623 710000817
New Genuine OEM Air Outlet for Can Am Outlander Gen 2 Part Number 707001496
Air Pressure sensor, this goes in the Black plastic Intake manifold. Will work on any 2006 to current Can am Outlander, Renegade, Commander, Maverick, Defender 500 570 650 800 850 1000 XT XMR MAX or XXC The Manifold Absolute Pressure sensor or MAP sensor is a sensor that is attached to the intake manifold. The MAP sensor responds to changes in the intake manifold pressure (vacuum) and provides a reading of engine load. How it works is 5 volts DC is supplied to the sensor from the ECU. Inside the MAP sensor there is a resistor that moves in relation to intake manifold pressure. The resistor varies the voltage between about 1V to 4.5V (depending on engine load) and that voltage signal is returned to the PCM to indicate manifold pressure (vacuum). This signal is essential for the PCM to determine fuel delivery. Part numbers: 420874650 707000564 707000995 0 261 230 030 ALFA ROMEO 46553045 ALFA ROMEO 46533518 CHERY S21-3614021 FIAT 46553045 FIAT 77364869 FIAT 7084986 FIAT 0000046553045 FIAT 46533518 LANCIA 46533518 LANCIA 0000046553045 LANCIA 46553045 MOOSE 2120-0994 PROTON PW810694 ROTAX (BOMBARDIER-ROTAX GMBH) 874 650 SCANIA 5166434
OEM Rotax Cylinder Base gasket Fits many Canam ATV’s/UTV’s 330 400 500 650 800 1000 Unsure on fitment? Please ask! Part number 420630210- OUT OF STOCK
Can-am Shim Kit for XMR G2 800 or larger 2012-current Rear Differentials. Part number 703500835 
Moose Racing gearbox bearing and seal kit. Part number 1104-0021 This is for small gearboxes found in Outlander and Renegade 500, 570, 650, 800, 850 and some 2015 and newer Outlander 1000’s ATV’s If you have fitment questions, please ask, we are here to help.
KFI Brand Allows you to use a standard 2" truck hitch on your ATV. Fits G2 Outlander/Renegade 100% MADE IN USA Constructed of 3/16" steel Powder coated black for supreme durability Complete installation instructions included No Mounting Hardware required
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.