neapco Brand U joint for front drive shafts These U joints are made in Italy, please do not confuse these with the sub-grade china made u joints. Fits: G1 Renegade and Outlander . Also works on Outlander 400 Rear shafts. Maverick/Commander front driveshafts Will not fit: Maverick X3/Sport/Trail or Defender Includes clips, and grease fitting. Pro tip: Install grease fitting before pressing in u joint. Install u joint in a manner where you can still grease the joint in chassis. Replaces OEM : 715900325 703000023 703000024 703500002 703500135 703500607 703500814
CVtech Slider Shoe HD set of three for billet plate 0930-2004
New OEM 18 spline yoke with fully machined surface This is the forward most yoke on the rear driveshaft of G1 ATVs Fits years 2006 and newer, 450 and larger machines, if you are unsure on fitment please contact us. Use with 398 type U joints Current Part number 715900101 Replaces 705500371 705501372
Can-am OEM PTO and crankcase bearing install and removal tools. These are the OEM tools required to install bearings in the bottom end of your Can-am V twin engine correctly. Part Numbers 529035917 & 529036032
OEM O ring this seals the gearbox oil, it is installed on the rear through shaft bearing housing. Roughly two inches in diameter. Part Number 420230306 replaces 420230305
Can-Am 703500865 Secondary Clutch Driven Pulley Stud Nut Screw Kit Secondary Stud/Nut Kit M10x136mm You will need to reuse your washer. This kit will work on every Vtwin ATV factory driven (secondary) clutch (pulley) Also fits Commander driven clutch Will work on non QRS Maverick driven clutch If you have fitment questions, please contact us, we are here to help. Part numbers: 703500865 420441900 420242097 420242402
Brand NEW Genuine OEM Upper Ball Joint For G2 ATV , 2012-Current Commander and Maverick Will not Fit Maverick X3/Trail/Sport Does NOT include Circlip, Cotter Pin, Hardened Washer, or M12 Nut. Be sure to save your old ones Part Numbers: 706200741 706201370 706201394 706202044
NEW OEM Can-Am Variator CVT Clutch Outer Cover Belt Box This part is made for 2016-current Outlander and Renegade 1000R’s Perfect for a machine with a larger aftermarket clutch or any machine using a Maverick Primary with a stud/nut, as this cover has more room inside. **NOTE: This cover does not have any extra venting holes** Current Part number: 420612316 Old Part number: 420612310
Brand New Genuine OEM BRP logo sticker 68mm size
New OEM driveshaft dust protector Protects the gearbox seal Current part number 705501123 Replaces 705500678 and 705500902
NEW Genuine OEM Can-am Rear Prop Shaft for 2012-14 Outlander 1000 NON XMR NON MAX Or 2012-18 Renegade 1000/1000R. NON XMR Comes with protector ring installed. Wear ring is not needed or included on this shaft. The yoke is simply machined larger in outer diameter. If you have any doubts about fitment, please count your splines on your gearbox output shaft and the pinion shaft on your differential. This shaft is for 20 spline gearbox output shaft and 18 spline rear differential. Current Part number: 703500991 Replaces Part Numbers: 703500929 703500862 705501413 705501258
BOYESEN SUPERCOOLER WATER PUMP Cover and Impeller Kit Increased coolant flow at all rpm ranges Patented Nautilus-style impeller for hydrodynamic efficiency Color/Finish: Black, Powder-Coated Material: Aluminum Model: Supercooler Part number 0932-0166 WPK-80B Replaces OEM 420222505 420222785 703501124 This is the style with the smaller output nipple roughly 7/8 inch in outer diameter.
New XPS SAE 75W-140 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box 1 U.S QT 946ml per bottle Listing is for 2 Quarts. See your owners manual before ordering to make sure you order the correct weight for your Can Am Part number 779160- OUT OF STOCK
Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 710001473 replaces 710001417 
This part is made for 2016-current Outlander and Renegade 1000R’s, but would be perfect for a machine with a larger aftermarket clutch or any machine using a Maverick Primary, as this cover has more room inside for the stud.
Comes with the NEW UPDATED 420612310 cover
This kit will keep the water out!
Comes with:
2016-current Outlander and Renegade 1000R’s covers inner and outer.
CVT Cover Gasket
CVT plug
PTO O-ring
Gear box O-ring
Inner CVT Bolts/Nut
13 Cover screwsPart numbers
420612316
420440568
420612304
420430408
420631088
420441311
420430126
707001179
SHIPS FREE TO THE LOWER 48 STATES New Can Am Maverick or Commander Gear Box New Can-Am GEAR BOX this is the way to reduce the over all gear ratio on your can-am 1000 running larger tires. Current Part Number- 420686654 Replaces: 420686563, 420686562 & 420685807 NEW OEM Canam Part NOT A REBUILD, ALL NEW Brand New In The Box This is the LOW RATIO gearbox for the larger style gearbox equipped machines, please ask if you are unsure about fitment. **Top speed on our 2012 Commander 1000 is 62 mph (high range) with this gearbox and stock clutching and stock size tires** Gearbox ratios, this isn’t regurgitated info, this is us counting teeth inside of the gearbox. Ring and Pinon Gears 37/15=2.467 Intermediate 45/40=1.125 High Range 36/27=1.333 Low Range 46/17=2.706 Reverse 34/12=2.833 High Range Ratio 3.700 Low Range Ratio 7.509 Reverse Ratio 7.863
Six Weights 16 gram each for CVtech Trailbloc Primary Part numbers: 0935-2006 or 0901-7106- OUT OF STOCK
EPI Primary Clutch Slider Buttons WE210931
Replace your worn slider buttons with these from The Clutch Guys. Worn slider buttons cause noise, poor shift reaction and potentially damage to your primary clutch. Buttons that are allowed to wear too far will eventually fall out of place causing major damage to the clutch. If your clutch has a lot of miles on it be sure to inspect your rollers also.
The kit includes 12 replacement slider buttons
Replaces OEM part numbers: 420281290 420281291 420281293 420281296 711281290
Brand New Genuine OEM Start/Stop Switch
Will come as pictured
Works on many V-twin ATV’s Renegades and Outlanders
Will not work on 400’s
Please look at the plug style on your current switch. The buttons may be arranged differently than the switch you are replacing.
We have found this switch will work on all V-twins DPS or non DPS 2006 to 2015
Current Part number: 703500920 Replaces: 710003062 710002883 710003039 710004041
NEW OEM Timing Chain Tensioner Kit Sold as a Pair, enough to do one vtwin engine. Fits: 500 570 650 800HO 800R 850 1000 1000R engines. Part numbers 711641150 420641150 420430370 420430373 290250890 420250890 711238120 420238120 420236520 420236521 711236520 711236510 420236510
Replaces 705501557 Pinion seal
found on G2 800 850 1000 1000R XMR rear differentials
38mm Inner Diameter
80mm Outer Diameter
8mm Thick
Brands we use include : Timken, Dichtomatik or SKF
OEM Number 705501557 Pinion seal found on G2 800 850 1000 1000R XMR rear differentials 38mm Inner Diameter 80mm Outer Diameter 10mm wide
New OEM Can Am Outlander and Renegade 500 570 and 650 Helix/Cam. Common Upgrade for 800’s with over-sized tires. Current Part Number 420280199 Old Part Number 420280194
MANTA GREEN wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715003812 & 715001378
30amp five pin relay OE supplier Song Chuan Replaces OE numbers 278002822 278002168 710001334 515176774 710000739 515176774
SHIPS FREE TO THE LOWER 48 STATES This is the high end XMR rear differential replacement. The differential has all forged Carburized (case hardened) alloy gears, and high end bearings inside billet cases. These gears are set up to very specific tolerances, ready for years of abuse. These are sold with a six month warranty on the gears, lifetime on the cases. These gears require a break in period of 75-100 miles This is the aftermarket upgraded XMR 1000 rear differential found in 2013-18 1000/1000R XMR. You will have to clearance your surrounding brackets to install as this is a beefier case. The drain plug access hole in your frame may have to be enlarged also. It is also used in the G2 800 XMR & 850 XMR. It will fit g2 bikes (500/650/800/1000) if you are upgrading you will need to shorten your shaft 1.75" or by purchasing a conversion shaft, we can help with application, please ask! (G1 bikes will require further modifications to work). This differential has automotive style cut gears, tapered roller bearings, along with an overall larger gear size when comparing it to the standard differential. There are a total of three bearings on the pinion gear giving it much more support over the standard rear differentials, this requires a shorter driveshaft, as mentioned earlier if you are swapping this in place of a standard differential. Pinion spline count 20, standard differentials use 18 spline pinion shafts, that are smaller in diameter. In every way this is a beefier differential. Replaces current part numbers 705502178, 705502090 this does not have the ABS sensor hole.
Gold / Red / White 300-1600 rate 0951-1021
New G2 dual piston front right brake caliper with pads. Fits G2 Renegade and Outlander 2012+ Replaces Part number 705600861
SHIPS FREE TO THE LOWER 48 STATES! Can-am NEW OEM Main bearing set. Kit includes: Main Bearing Half with Oil hole 420233965 x2 Main Bearing Half without Oil hole 420233960 x2 PTO Cover Bearing 420233995 Be sure to mark your cases before pressing them out! The oil holes need to be lined up!
NEW OEM Oblong Oval Grommet Part number 705003668 replaces 705002665 and 705001121
O-Ring, this seals the rear differential case halves together. Fits: G2 2013-18 800R/850/1000/1000R XMR and 2019+ 650 or larger rear differentials. Unsure on fitment? Please contact us before ordering we will help. Part number 705501711
New OEM 2019+ rear differential gear set, 10/36 tooth straight cut ring and pinion gear set, Timken seals, NTN or IKO pilot bearing , OEM shim kit and OEM bearings along with a new bolt and washer to retain the driveshaft. BRP claims 25% increase in load capacity on this gear set vs the spiral cut xmr final drive units (rear differentials) from 13-18 models. Fits differential part numbers: 705502808, 705502546, 705502178, 705502090 703501031 705501550 705501556 705501557
NEW Black Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121B, ALUGB14BX
NEW OEM BRP Coupler This is found on many machines, 18 spline exterior No need for a wear ring on this coupler. Part number 705401969 Replaces 703500678 705400149 705500201
Aftermarket Four wheel drive servo motor.
This is what engages the sliding collar putting power to the front differential.
Replaces oem 715900614 4151 29174 420891087
High quality Timken axle oil seal. Fits ATV rear differentials 2006-2014 To be 100% sure on fitment, measure your outer diameter on your seal, it should read 47mm This seal has a 30mm inner diameter 47mm outer diamter and is 7mm thick. Replaces OEM 705500751 705501196 and 705501996 Order qty two per machine.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.