- OUT OF STOCK
G2 dual piston brake calipers with pads. Genuine OEM parts. This set of three calipers will fit G2 Renegade and Outlander 2012+ Part numbers 705600861 705600862 705600859 Cleaned greased and ready to install. 
New Can Am OEM Axle Rear Right (throttle side) Fits: 2006-2018 ATV Outlander/Renegade 500 570 650 800HO 800R 850 1000 1000R 2019-2023 Outlander 450/570 Part number 705501486 Replaces 705500868 705500983 705501484 705502473 Premium quality design ideal for off-road, heavy-duty and low speed torque usage. Includes CVs, Shaft and Boots with the best suited geometry for your Can-Am vehicle.
NEW OEM Idle Gear Oil Seal Part number 420430555- OUT OF STOCK
Aftermarket Four wheel drive servo motor. This is what engages the sliding collar putting power to the front differential. Part number 715900614 420891087 415129174 
New electrical connector cap, this covers the 8 pin open connector found on US models. This cap seals and helps keep your open harness plug free from dirt and corrosion. Be sure to clean out the connection before installing, dielectric grease is a great idea for extra protection. OEM supplier brand housing Aptiv formally Delphi
Used Water deflector, this passively covers the cvt inlet pipe from splashes of water/mud kicked up from the front wheel/tire. This part is in good working order with normal scuffs and scrapes from off road use. Fits 2007-09 Renegade 500, 800HO and 800R Part number 707000509
USED OEM Rear master cylinder cover for G1 Renegade 500 800HO 800R Part numbers 705003325 705003650 705002410
New take off Unit-51 Removed From Machine With 9.5 Miles. Fits G2 Outlander and G2 Renegade Old part number 705201907 New part number 705203387
300M Demon Xtreme Heavy Duty Race Spec Ball Joint This fits Lower arms, on many applications. If you have fitment questions please contact us! 2012-2025 G2/G2L/G3/G3L Outlander 500/570/650/700/800R/850/1000/1000R 2012-2025 G2 Renegade 500/570/650/800R/850/1000/1000R 2013-2018 Maverick 1000R/1000R Turbo 2017-2025 Maverick X3 Turbo/Turbo R/Turbo RR/non turbo 2019-2025 Maverick Sport 1000R 2018- 2025 Maverick Trail 800/1000 2016-2025 Defender HD5 HD7 HD8 HD9 HD10 2011-2025 Commander 700/800R/1000 2024-2025 Maverick R (please note this is installed in the upper, and may affect tire clearance) Demon Part number PABJ-5006XHD Replaces OE part numbers 706201393 706201576 and 706202045 This design eliminates the snap ring, opting for a threaded chromoly body for secure ball joint retention. Constructed from 300M stud and dual heat-treated 4340 chromoly steel body and finished with zinc plating. This ball joint is adjustable, rebuildable, and greaseable, maintaining smooth operation for years to come. Warranty for Xtreme Heavy Duty Ball Joint Race Spec Demon Powersports warrants its Demon Xtreme Heavy Duty Ball Joints to the original purchaser for a lifetime period from the date of purchase against manufacturing defects in workmanship and material only. Demon Powersports’ warranty does not apply to failures resulting from misuse, negligence, accidents, improper application, improper installation, alteration, or lack of reasonable or proper maintenance, or if the machine is used in racing or commercial applications. This warranty does not cover normal wear and tear items such as gaskets, seals, boots, bearings, bushings, and rotors. Demon Powersports does not cover the cost of removal and reinstallation of any kind.
NEW OEM Spacer for G2 Can-Am Outlander and Renegade This takes up space between the bearings in the rear control arms. This is located on the frame end of the trailing arm. You'll need two per machine. Part number 706002259
New Genuine OEM Can Am speedometer Part number 710005632 Fits: 2018 Outlander 850/1000R XMR XTP LTD XXC 2019 Outlander 850 XTP These are designed to auto sync with your machine if it does not auto sync you will need to use buds software to match the dash to your machine. This is a new dash with 0 miles the Engine hours stay with the ecu, be sure to record your miles for your own records. The dash is set from the factory in km/h and will require BUDS programming to change it to mph. Will come as pictured
Curley's on and off-road performance Maverick Swap Brackets with hardware, BYOD bring your own differential. These beefy brackets allow you to install a huge Maverick rear differential into your G2 ATV. This kit places the pinion in the same place as an XMR rear differential, meaning 2012-2018 800/850/1000 XMR ATVs will be able to use the stock driveshaft. All 2019 and newer G2 650/850/1000 models also use the stock driveshaft. If you have questions on fitment we are here to help. This requires you to cut your frame, trim brackets and drill a few holes instructions are provided here. If you are mechanically inclined figure 3-4 hours for install.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.
Free shipping on most domestic orders over $99 Dismiss