New IKO, Koyo or NTN brand needle bearing B98 replaces 705500261 If you are unsure on fitment please reach out to us we will help.
CAN AM OEM AIR OUTLET OUTLANDER 800 707000870 Fits All G1 Vtwin ATVS this tube is a great way to snorkel your atv this adapts the rear oval to a round tube up near the front cylinder. Please understand 2012 800 Outlanders are G2 and 2012 Outlander Max 800 are G1 If you are unsure on fitment, please ask us!
NEW Take Off G2 Can Am Outlander Renegade Left Lower Arm 706201874 Unit-51. Removed From Machine With 9.5 Miles.- OUT OF STOCK
NEW OEM G2 ATV Battery Hold Down Fixation Plate Kit. This retains the battery in place, and gives your seat something to latch into Kit includes: Fixation Plate 710009129 replaces 710002404 Positive Battery Terminal Cover 710006729 Rubber Stopper 705014429 Three aftermarket stainless bolts 
NEW Take Off G2 Can Am Outlander or Renegade Front Prop Shaft 705400913 Unit-51. Shaft From Machine With 9.5 Miles.
NEW Quad Logic Brand G2 ATV Can Am Airbox Seal Part number 500-1139-PU This is an improved design over factory Apply a small amount of grease to aid install, this is much thicker and denser than the OEM o-ring or gasket Replaces OEM part numbers: 293300165 293300175 293300179
NEW OEM Can Am Tool M8x1.25 Tapered Bolt Part number 529036098. This tool fills a few roles, used to open the secondary clutch on many models. This will also lock the crankshaft on Vtwin's and three cylinder models. If you are unsure on application please reach out to us, we are here to help!- OUT OF STOCK
NEW KFI Products Tiger Tail Tow System With 2 Inch Universal Receiver. Tow Rope Part Number 101120 And Receiver Part Number 101110. ATV and UTV retractable tow rope with a retractable design allowing for quick, easy, clean use for towing or as an anchor-line during poor underfoot winch operations Superior to a tow strap and wicked fast deployment 12' of 12,000 lb average breaking strength rope with wear resistant coating Self locking hook storage 3/16” grade 50 steel construction Fully sealed and lubricated mechanism tested to 14,000+ cycles Shot blasted and powder coated black for supreme durability Convenient operation and easy to use Quality built and dependable performance Rugged design for the toughest environments – no electrical parts to burn up Constant tension Keeps your gear clean – no more dirty tow straps to carry 100% serviceable components Made in USA 
NEW Take Off G2 Outlander Renegade Left Swing Arm 706001860 Removed From Machine With 9.5 Miles.
NEW Take Off Can Am Outlander Renegade Radiator Part number 709200286 Great shape, no leaks, this was removed from a machine with 9.5 miles.- OUT OF STOCK
Brand New Genuine OEM front differential This is the visco 4lok model which has the electronic locking mechanism Part number 705403049 replaces 705402700 This is found in the 2021+ G2 XMR, XTP and XXC models. You will need to transfer over your fill plug after filling this with gear oil. - OUT OF STOCK
G2 dual piston brake calipers with pads. Genuine OEM parts. This set of three calipers will fit G2 Renegade and Outlander 2012+ Part numbers 705600861 705600862 705600859 Cleaned greased and ready to install. 
NEW Aftermarket Replacement Throttle Lever Assembly with 4x4 Switch. This fits all G1 Outlanders and Renegades, and G2 models with a throttle cable. Replaces Part Numbers: 707000595 709400186 707000369
NEW EBC Brake Rotor UTVX6370
Heat-treated carbon steel brake rotors
Steel construction extends rotor and brake pad life by eliminating galling
These rotors look great and are self cleaning whilst improving brake performance
Made from durable and tough heat treated stainless steel in the British manufacturing facility using premium German mill-rolled steel, heat treated and then diamond ground to deliver great brakingReplaces OEM part numbers 705600999 705601997
NEW OEM Voltage Regulator Converts AC voltage from the stator to DC voltage used to charge the battery. Part Number 710001191 This is the 650watt version compatible with many ATVs with DPS if you have fitment questions please ask!- OUT OF STOCK
New aftermarket switch replaces OEM part numbers: 710008837 710005070 710000791 710004618 703500920 710003062 710002883 710003039 710004041 Fits on: 2006-2019 Outlander and Renegades 500 650 800HO 800R 850 1000 1000R 2020 Outlander 650 STD DPS XT XMR 2020 Outlander 6x6 650 or 1000 2020 Renegade 570 XMR Will not work on 400’s or machines with drive by wire. 3 position headlight switch OFF/Low/High beam Will come as pictured Please look at the plug style on your current switch. The buttons may be arranged differently than the switch you are replacing. We have found this switch will work on DPS or non DPS equipped machines 
New Can Am OEM Axle Rear Right (throttle side) Fits: 2006-2018 ATV Outlander/Renegade 500 570 650 800HO 800R 850 1000 1000R 2019-2023 Outlander 450/570 Part number 705501486 Replaces 705500868 705500983 705501484 705502473 Premium quality design ideal for off-road, heavy-duty and low speed torque usage. Includes CVs, Shaft and Boots with the best suited geometry for your Can-Am vehicle.
NEW OEM Shock Heat Shield
This helps keep heat from the exhaust melting your bump stop in your shock.
Current part number 705210324 replaces 705209688
ATVs equipped with piggy-back reservoir type shocks will need to cut the bracket to clear the shock. These are made for use with the standard black bodied shocks.
Brand New OEM Can Am 2021+ iTC (Intelligent Throttle Control) Outlander Renegade throttle-by-wire and 4x4 Switch Housing This is for models with with Visco-4Lok (electronically locking front differentials) Part Number 707003185 replaces 707002957 707002626- OUT OF STOCK
Brand New OEM Can Am 2019+ iTC (Intelligent Throttle Control) Outlander Renegade throttle-by-wire and 4x4 Switch Housing Part Number 707002684 replaces 707002272 
CVtech Slider Shoe HD set of nine for ribbed plate 0982-7055 Replaces 0930-3020- Sale!
Brand New Klotz Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. For Can-am off road vehicles with 500cc or larger Vtwin Rotax engines. Excludes Traxter and Quest. Not compatible with Maverick X3 Includes 3 quarts synthetic oil 10W50, 0-ring , Highflow HF152 oil filter, and copper washer for both old style and new style drain plugs. 10w50 oil, great for hot climates, temperature range -13*F to 122*F Will not ship in original box 
Brand new aftermarket secondary clutch assembly This is found on many BRP ATVs. Please ask if you have fitment questions. Replaces OEM Part Part Numbers: 420280173 420280176 420280178 420932421 420280236 420280499 420245910 420245911 420220913 If your machine has a spring with pigtails you will need to use a spring without them as this aftermarket clutch does not have provisions for them. 420238176 OEM Black/Orange is a great substitute Installation Torque Specs: 45 ft·lb On the Secondary Bolt (red thread locker recommended, allow to set up overnight)- OUT OF STOCK
NEW OEM BRP Rotax Engine. 2016+ ATV 850 Vtwin 78 horsepower@ 7300 RPM, 94mm bore, 61.5mm stroke, 10.5:1 compression ratio. The 850 will have the larger valves when compared to the 800R, these were first seen in the 2013 1000R maverick engine, these are 36.5mm and 31mm respectively. This is new, not rebuilt. It will ship as pictured. No electronics included, you will need to transfer over your parts. Shipped with signature required. 
CVtech Slider Shoe HD set of three for stamped plate 0930-3002
NEW Spanner Wrench This is to remove and install the 705501550 nut on ATVs with the tapered roller bearing rear differentials. Also known as the XMR or 2019+ style rear diffs. Use a 20 spline yoke to retain the assembly in a vice and spin the nut off. The nut should be RH threaded
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.5:1 compression ratio This is a ready to bolt on kit Fits: Commander 1000 ATV 1000/1000R Defender HD10 and DH9 Maverick Sport 1000 Please note this kit will not fit the SXS 1000R due to the lower compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420685242 420685248 420623568 420623566 420630210 420245436 420216351 420685244 420296774
Kit includes one universal boot, one reusable cone tool, two stainless steel clamps, grease pack, and silicone cone lube and instructions Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement Lithium based molybdenum grease ensures good lubrication for long CV joint life XL version of the original EZ Trail boot designed to fit UTVs and large ATVs Material is expandable yet tough enough to be a permanent fix Two clamping diameters ensure a good fit on most vehicles Boot material stays flexible in extreme cold temperatures
Slider Blocks for Trailbloc Primary clutches for CANAM ATVS This is a set of six, you will need to transfer over your weights. Part number 0930-3022
New Genuine OEM steering stem for G2 Outlander and Renegade This will only fit NON power steering models Will not work on power steering bikes Current Part number 709401008- OUT OF STOCK
New Can Am Outlander Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2018-2020 Please understand 2017 and older models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710005553 
NEW OEM BRP Thermostat Current part number 709200406 replaces 709200383 This style is external from the cylinder head. If you are unsure on fitment please contact us.
NEW Outsiders Mud Crew Airbox seal This is an improved design over factory Apply a small amount of grease to aid install, this is much thicker and denser than the OEM o-ring or gasket Replaces OEM part numbers: 293300165 293300175 293300179
All Balls complete fuel pump module, retaining nut and gasket This fits G1 Models: 2009-2015 EFI Outlander 400 2009-2012 Outlander or Renegade 500 2009-2012 Outlander 650 2009-2011 Outlander 800R 2012 Outlander 800R XMR 2012 Outlander 800R MAX 2009-2011 Renegade 800R Part number: 47-1049 24-71022 Replaces OEM numbers: 703500766 703500781 709000194 709000245- OUT OF STOCK
NEW OEM Brake Line Fits 2012-17 Renegade 500 570 800R 1000 and 1000R Current part number 705601489 Replaces 705601123 705601060 This connects the front master cylinder to the front calipers. Brake lines on 2012+ and newer Can-am ATVs are known to be difficult to bleed, it is best to set some time aside to bleed it multiple times to get a firm lever. 
Part number 0950-1011
This isolates the spring from the one way bearing on a trail bloc primary clutch.
Measurements as shown
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.