Outlander

  • NEW NGK Spark Plug LMAR8D-J 450 850 1000R ATV

    $17.50

    New NGK Spark Plug 93444

    OEM part number 715900352

    NGK part number LMAR8D-J

    These spark plugs work in 2015+ Outlander/Renegade 450 850 and 1000R also fits Defender HD5

    Shell

    Thread Diameter: 10mm
    Thread Pitch: 1.0mm
    Seat Type: Gasket
    Reach: 26.5mm (1.04″)
    Hex Size: 9/16″ (14mm)
    Terminal Type: Solid
    Gap: .031″ (0.8mm)

    Center Electrode

    Material: Nickel
    Type: Standard
    Size: 2.5mm
    Projection: Projected

    Ground Electrode

    Material: Nickel
    Type: Multi-Ground

    Specifications

    Resistor: Yes
    Resistor Value: 5k Ohm
    Heat Range: 8
    Torque Specs: Aluminum: 7.2-8.7 lb. ft.

     

     

    Add to cart Details

  • New OEM Stator Magneto Cover Gasket 420651201

    $36.99

    Brand New OEM Stator Cover Gasket for V-Twin Engines. Fits 2006-Current V twin’s Part number 420651201

    Add to cart Details

  • NEW OEM Standard Pinion Seal

    $19.99
    New OEM Differential Pinion Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: Gen 1 Front and Rear Diffs Gen 2 Outlander and Renegade Front and Rear Early Commander Rear All Maverick and Commander Front WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL Measurements are shown: 70mm outside and 37mm inside Part number 705401481
    Add to cart Details

  • CVtech Trailbloc One way assembly bearing

    $143.49

    Cvtech 1 Way assembly bearing for use on all canam cvtech primary clutches. *will not fit other makes*

    Part number 0940-0001

    35mm Inner Diameter
    52mm Outer Diameter
    24mm Wide

    This is a great video showing how to install –>>LINK HERE<<–

    Add to cart Details

  • New OEM Wheel Center Cap Set

    $28.00
    BRAND NEW Can Am OEM Wheel Cap This is for a set of Four (4) Caps Part Number 705400928 There is more than one style. Please verify that this is the correct style BEFORE ordering.
    Add to cart Details

  • CVtech Trailbloc ATV Primary Clutch

    $723.89
    CVtech Trail Bloc Primary Clutch with HD retaining bolt, calibrations are for ATVs not UTVs Solid upgrade over the factory unlocked primary clutch, this is a straight bolt on replacement. Locked sheaves, smaller one-way diameter and more belt grip. This is a great clutch for riders looking for a performance upgrade. This comes preset, some fine tuning may be required to get this 100% Many find these settings to be spot on. We will provide assistance in fine tuning for your riding style. Please allow additional 1-2 day handling time.
    Select options Details

  • NEW OEM XMR Pinion Housing Nut Socket Tool

    $65.99
    NEW OEM Tool 529036302 This removes the large housing nut on G2 XMR Rear Differentials Also works on 2019 ATV Rear differential housing nuts. please note there may be some casting flare on your housing nut you may have to file to get the tool to fit, as it is a very tight fit.
    Add to cart Details

  • New OEM G2 ATV Front Drive Shaft

    $179.99

    SHIPS FREE TO THE LOWER 48 STATES New OEM G2 Front Prop Shaft. These are designed to shear to save more expensive components. Current Part number: 705400913

    Add to cart Details
  • OUT OF STOCK

    NEW OEM Secondary Bolt M10X110

    $12.99
    NEW OEM Can-am Secondary Clutch Bolt M10X110 Hex head used with  many canam secondary clutches, fitment questions please ask. Part number 420441485
    Add to cart Details

  • CVTECH TRAILBLOC PRIMARY WEIGHTS 20G

    $27.10
    Six Weights 20 gram each for CVtech Trailbloc Primary Part numbers: 0935-2008 or 0901-7108
    Add to cart Details

  • G2 Outlander Snorkel Pre-Filter Screen 707800796

    $17.49
    New OEM Fits G2 Outlander snorkel kits Works on snorkel kit 715001730
    Add to cart Details

  • NEW OEM G2 ATV Battery Hold Down Seat Latch Fixation Plate 710002404

    $7.69
    NEW OEM G2 ATV Battery Hold Down Seat Latch Fixation Plate Fits G2 and G2L chassis 2012+ This retains the battery in place, and gives your seat something to latch into Be sure to transfer over your grommets as this is just the plate nothing extra. Part number 710009129 replaces 710002404
    Add to cart Details

  • NEW Standard Front Differential Bearing and Seal Kit

    $133.00
    SHIPS FREE TO THE LOWER 48 STATES Set of Bearings and Seals to Rebuild Your Front Differential on Your Can-Am Fits Most Can-Am Models from 2007-Current (WILL NOT FIT Maverick X3/Sport/Trail or Defender) This Kit has High Quality Aftermarket Bearings which are: Timken, SKF, NSK, KOYO, Nachi Comes with: 2 - Carrier Bearings- SKF Brand 2 - Axle Bearings- OEM NSK Japan made 2 - Axles Seals- Timken 1 - Inner Pinion Bearing- Nachi Japan made 1 - Large Pinion Bearing- Koyo Japan made 1 - Pinion Seal
    Add to cart Details

  • NEW EPI Ball Joint Kit G1 ATV WE351039

    $23.95
    EPI Ball Joint Kit G1 Fits Outlander 650/800 Upper Renegade 500/800 Lower or Upper Heavy Duty Steel housing with isolated design joint for long life Ball joint includes ball joint, rubber boot, snap ring and cotter pin EPI Part Number: WE351039 P/U Part Number: 0430-0610 Replaces OEM Part Number: 706200653
    Add to cart Details

  • Timken ATV Front Axle Seal

    $8.99
    High quality Timken axle oil seal. Fits ATV front differentials 2006-current, some UTV's To be 100% sure on fitment, measure your outer diameter on your seal, it should read 47mm This seal has a 25mm inner diameter 47mm outer diamter and is 7mm thick. Replaces OEM 705500255 705500081 Order qty  two per machine.
    Add to cart Details

  • EPI A-Arm Bushing Kit Can Am Upper/Lower G1 ATV

    $11.99
    EPI Bushing Kit, steel inner, plastic outer bushings and shims  Set of 4   Fits: Can Am ATV’s Outlander or Renegade and Commander If you are unsure on fitment, please contact us before purchasing!  Exact replacement components to return your suspension to like-new condition Kits are sold per A-arm   EPI Part Number: WE341043 P/U Part Number: 0430-0707 Replaces OEM Part Numbers: 706200051 706200181 706200157    Ships as Pictured
    Add to cart Details

  • NEW OEM 18 Spine Yoke With Wear Ring

    $42.50
    Rear Yoke for use with 398 U joints. This yoke includes the wear ring pressed on. 18 spline count. This slips into standard rear differentials. Part number 715900101 and 705400036
    Add to cart Details

  • Moose Racing G2 Rear trailing arm Bearing Kit

    $42.95
    Moose racing G2 trailing arm bearing and seal kit with step bushings. Order two per ATV, as one kit will only be enough for one arm. Replaces OEM: Seal 293200132 Bearing 706000826 Spacer 706001225 706001282
    Add to cart Details

  • NEW OEM PTO Cover Gasket 420651211

    $23.49
    Brand New OEM PTO Cover Gasket for V-Twin Engines Part number 420651211
    Add to cart Details

  • New OEM Helix Cam BLACK 800 1000 With Hole

    $114.99
    New OEM Can Am  Factory Helix If you are unsure about fitment, contact us. We are here to help! Current Number 420280472 Old part numbers: 420280193 420280198 420280470
    Add to cart Details

  • VERTEX Water Pump Rebuild Kit for V-Twin Engines

    $27.05

    Vertex water pump rebuild kit

    Will fit all V-Twin Can-Am Engines

    Part Number 680-1957 821957

    Replaces OEM 420650370 420651190 420230415 420650310 420650315

    Add to cart Details

  • CVTECH TRAILBLOC PRIMARY SPRING 200-1200

    $48.89

    Gold / Yellow / Pink 200-1200 rate 0951-1016

    Add to cart Details

  • New OEM G2 Outlander XT-P Dash Gauge Kit

    $385.00
    SHIPS FREE TO THE LOWER 48 STATES Dash swap kit for G2 2012-17 Can-Am ATV’s. WILL NOT FUNCTION 100% on the L models 400/450/500/570 Please note some 2012-13 models may show "dps overheat" This is the factory gauge from the XT-P models. Dual Analog Style read outs. This has the built in coolant temperature gauge, a must for riding in extreme conditions! Brand new dash with 0 miles the Engine hours stay with the ecu, be sure to record your miles for your own records. Dash is set from the factory in KM/H and will require BUDS programming to change it to MPH  This can be done at your local dealer or we offer this free of charge with purchase if you would like to stop by or you can send us your ecu, dash, key and DPS (power steering) if factory equipped. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Part Number: 710005075 705006322
    Add to cart Details

  • NEW TIMKEN Canam Engine Crankshaft PTO Oil Seal Vtwin

    $15.00
    This model type is a rubber O.D. seal with two sealing lips. The main sealing lip is spring loaded. This is a two-way seal, which means that it can retain lubricant and exclude contaminants simultaneously Canam Vtwin crankshaft main seal. Replaces OEM number 420631933 This seal is pressed into the PTO cover on v-twin's Unsure on fitment? Just measure you seal. 52mm Outer Diameter 34mm Inner Diameter 8mm Thick
    Add to cart Details

  • NEW OEM Lower Ball Joint G2

    $40.99
    Can Am OEM lower ball joint Old part number is 706201393 706201576 Current part number is 706202045
    Add to cart Details

  • CVTECH TRAILBLOC PRIMARY SPRING 200-900

    $48.89

    Gold / Yellow / Red 200-900 0951-1015

    Add to cart Details

  • NEW OEM Standard Front Differential Axle Seal

    $31.98

    New OEM front differential axle seal

    Outer diameter is 47mm

    Inner Diameter is 25mm

    Part numbers: 705401486 705401618

    Add to cart Details

  • NEW OEM 20 Spline YOKE and Wear Ring For Rear Differential

    $42.50
    20 Spline Yoke with Wear ring installed. Fits: XMR 1000, Maverick and '14&newer Commander style Rear differentials. These yokes are made to very tight tolerances, if you are not careful when installing these you can damage the yoke or your pinion shaft. We recommend you take your time and clean the pinion gear before installing. ---Great for custom applications--- Uses Factory size U joint (398 at the auto parts store) Part numbers 715900271 705400036
    Add to cart Details

  • LATE G1 / EARLY G2 Standard Rear Differential Seal Kit 1447

    $30.00
    Please verify your differential uses this style of seals before ordering! Can Am Rear Differential Pinion and Axle Seals (Timken or SKF) Fit on most 2006-2013 Outlanders and Renegades The Pinion Seal has a 70mm Outer Diameter And the standard 37mm inner diameter. The Axle Seal has a 47mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials Replaces OEM Numbers: 705400027 705500751 705501996 705401481
    Add to cart Details

  • NEW OEM Outlander 2020+ G2 Large 7.6″ LCD Dash Gauge Support Bezel XT-P

    $14.99
    This is the NEW OEM  factory gauge support from the 2020+ Outlander XTP and LTD models. For use with large 7.6" LCD display Part Number: 705013984
    Add to cart Details

  • NEW Spicer Front U Joint

    $40.00
    Spicer Brand U joint for front drive shafts Fits: G1 Renegade and Outlander . Also works on Outlander 400 Rear shafts. Maverick/Commander front driveshafts Will not fit: Maverick X3/Sport/Trail or Defender Includes clips, and grease fitting. Pro tip: Install grease fitting before pressing in u joint. Install u joint in a manner where you can still grease the joint in chassis. Replaces OEM : 715900325 703000023 703000024 703500002 703500135 703500607 703500814
    Add to cart Details

  • IACV Air Control Valve 420665941

    $144.99
    New Genuine OEM IACV idle air control valve bypass, this is what controls the idle speed of your ATV. Will fit on most any Vtwin 2006-current Can Am Outlander Renegade models. Will not fit 850 or 1000R engines with the 54mm throttle body. Old part numbers 420665940 420963055 420963057 Current part number 420665941
    Add to cart Details

  • CVTECH TRAILBLOC PRIMARY SPRING 250-900

    $48.89

    250 900 0951-1037

    Add to cart Details

  • CVTECH TRAILBLOC PRIMARY WEIGHTS 14G

    $27.10
    Six Weights 14 gram each for CVtech Trailbloc Primary Part numbers: 0935-2005 or 0901-7105
    Add to cart Details

  • New Trailing Arm Nut Removal Tool Spanner Socket

    $60.99

    Can Am Trailing Arm Nut Removal Tool, Spanner Socket

    Part # 529035925 Brand New, We recommend using heat on the nut as well.

    DO NOT use an impact gun on the nut as you risk breaking the tool. We have done many with a large breaker bar.

    Add to cart Details

  • Cam Chain Tensioner O ring 420430373

    $3.59
    NEW OEM Timing Chain Housing O ring Order two per Vtwin engine Part number 420430370 420430373
    Add to cart Details

Title

Email Now for More Info

1340 Okray Ave.

Plover, WI 54467

jared@canampartsguy.com

Cant find What you're looking for?

Visit our store!

2016 Can Am Parts, LLC. All rights reserved.