OEM Snorkel kit, this raises the engine air intake well above the handlebars. The ECU is relocated to allow for CVT breather tubes to extend upward. This kit includes the brackets for the two plug type ECU found on ride by wire outlanders. With the tubes molded specifically for this application this is the cleanest kit you can install on your machine. Part number 715005999 Installation time is approximately 3.5 hours This snorkel kit is not compatible with the XT Handlebar Protector Kit (P/N 715000271) 715005999 instructions
Brand New Genuine OEM BRP logo sticker 20mm diameter Part number 516006224 replaces 219902677 704904616
Impact-absorbing rubber prevents bottoming-out of winch Prevents hook rattling when not in use A must-have for preventing damage to your winch fairlead Made in the U.S.A. 2 1/2″ Diameter 1 3/4″ Thick Part number 4505-0475
New G2 dual piston Right Rear brake caliper with OEM pads. Fits G2 Renegade and Outlander 2012-current Genuine OEM part. Part number 703500969
NEW Chrome Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121, ALUG14BX
Brand New Genuine OEM head light For G2L. This housing is for both the high and low beams on a G2L model. The lens is roughly Five inches across. 710003900 If you have steel racks on a 2015 or newer Can Am ATV you have a G2L. New in package. Comes as pictured. This will not fit G2 or G1 regular Outlanders.
OEM Air Filter for Gen 1 Outlander and Renegades. Larger style air filter found on 800R machines. OEM part number: 707800288
Can Am G2 2012-2018 Outlander XT XTP bumper cap kits Will not fit G1 or G2L models, questions on fitment? Please ask! Comes with 1 Front LEFT or RIGHT Rear cap 1 Backing plate 2 Torx screws Will only work on front right or left rear of machine as you sit on it. All parts are New OEM Part Numbers: 705004409 705004987 250000720
Can Am G2 2012-2018 Outlander XT XTP bumper cap kits Will not fit G1 or G2L models, questions on fitment? Please ask! Comes with 1 Front RIGHT or LEFT Rear cap 1 Backing plate 2 Torx screws Will only work on front right or left rear of machine as you sit on it. All parts are New OEM Part Numbers: 705004410 705004987 250000720
New MOOSE UTILITY DIVISION Hi-Performance Cooling Fan - 1300 CFM Fits on some G2 Oultander/Renegade and OG Maverick, please verify your current fan motor has four mounting holes. Will not fit XMR Outlander's Part number 1901-0712 Replacement fan motor fits in part numbers: 709200564 709200309 709200462
There are a few options for kits, please verify your differential uses this style of gears before ordering!
This will only fit six mounting hole differentials.
Late G1 Early G2 Standard Rear Differential Ring 36t and Pinion 10t gear set Pinion bolt size is M10, this may be different than what you are replacing.
OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. This kit should be installed by an experienced technician.
Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4? (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16" (14mm) The pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
Moose Utility Division handlebars Replaces factory OEM handlebars 7/8? diameter standard size made from .083 steel tubing Pullback/Sweep: 4? Width: 32? Center Width: 5-1/2? Does not come with hand grips May fit other years or models Made in the U.S.A. Will come as pictured Replaces OEM Part Numbers: 709401240 709400877 709400292 Parts unlimited number: 0601-4379
