New take off Unit-51 Removed From Machine With 9.5 Miles. Fits G2 Outlander and G2 Renegade Old part number 705201907 New part number 705203387
NEW Take Off G2 Column Attachment Comes with bolts and elastic nuts Old part number 709400912 Current part number 709401428 Unit 51
New Genuine OEM Mounting kit sold separately Part number 715006118- OUT OF STOCK
New electrical connector cap, this covers the 8 pin open connector found on US models. This cap seals and helps keep your open harness plug free from dirt and corrosion. Be sure to clean out the connection before installing, dielectric grease is a great idea for extra protection. OEM supplier brand housing Aptiv formally Delphi 
USED Left Upper A-arm will fit 2006-2012 Outlander 650's and 800's. Will work in place of the black steel arms Comes as pictured bare arm- OUT OF STOCK
Aftermarket Four wheel drive servo motor. This is what engages the sliding collar putting power to the front differential. Part number 715900614 420891087 415129174 
NEW OEM Idle Gear Oil Seal Part number 420430555
MOOSE RACING HARD-PARTS Replacement Tie-Rod Ends 0430-0717 WILL NOT WORK WITH OEM TIE RODS Fits G2 ATV 2012-2018 with upgraded 12mm tie rods kit part number 0430-0674 This kit includes a pair of 12mm LH and RH ends, enough to repair one side of your ATV.- OUT OF STOCK
Inline fuel controller, this unit takes the fuel signal and modifies it based on throttle position and RPM inputs. Part number FC25009, please contact us if you have fitment questions. You can use a pre built map table or build your own custom map. Software is compatible with Power Commander, so you can download Power Commander maps to the unit Plug-n-play fuel management device pre-programmed with make/model specific maps Fully adjustable computer compatibility for ultimate tuning and personalization Use OEM-style connectors and high-quality wiring harnesses No computer necessary to modify fuel management Small, lightweight, and easy to fit on your bike Integrated O² optimizer where applicable 
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.5:1 compression ratio This is a ready to bolt on kit Fits: Commander 1000 ATV 1000/1000R Defender HD10 and DH9 Maverick Sport 1000 Please note this kit will not fit the SXS 1000R due to the lower compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420685242 420685248 420623568 420623566 420630210 420245436 420216351 420685244 420296774
BRP part number 715005159 Kit includes 4 springs.
Fits: 2019+ 650 or larger Outlanders with base black bodied shocks.
Heavy-duty springs provide enhanced stiffness.
Perfect for snow clearing and hauling heavy loads.
Improves handling.
Standard on Outlander PRO and Mossy Oak models.
New Can Am OEM Axle Rear Right (throttle side) Fits: 2006-2018 ATV Outlander/Renegade 500 570 650 800HO 800R 850 1000 1000R 2019-2023 Outlander 450/570 Part number 705501486 Replaces 705500868 705500983 705501484 705502473 Premium quality design ideal for off-road, heavy-duty and low speed torque usage. Includes CVs, Shaft and Boots with the best suited geometry for your Can-Am vehicle.
NEW EBC Brake Rotor UTVX6370
Heat-treated carbon steel brake rotors
Steel construction extends rotor and brake pad life by eliminating galling
These rotors look great and are self cleaning whilst improving brake performance
Made from durable and tough heat treated stainless steel in the British manufacturing facility using premium German mill-rolled steel, heat treated and then diamond ground to deliver great brakingReplaces OEM part numbers 705600999 705601997
NEW Take Off G2 Can Am Outlander Renegade Left Lower Arm 706201874 Unit-51. Removed From Machine With 9.5 Miles.- OUT OF STOCK
G2 dual piston brake calipers with pads. Genuine OEM parts. This set of three calipers will fit G2 Renegade and Outlander 2012+ Part numbers 705600861 705600862 705600859 Cleaned greased and ready to install. 
The Rogue Lock-On grips feature large raised pads for better shock absorption and deep grooves to channel away dirt and debris. Uses the Lock-On Grip System, easy no-hassle installation and 100% slip free performance. MADE IN USA PRODUCT FEATURES: Chunky, oversized grip provides extra shock absorption and improved control Larger grip diameter delivers extra padding, rugged surface pattern for better traction Extra-large raised pads provide shock absorption with deep grooves to channel away dirt and debris Molded inner 1st pass for easy, knock-out-ends for full-wrap handguards Preinstalled ODI V2.1 Lock-Jaw Clamps with screws Patented Lock-On Grip System™ design delivers easy installation and ensures 100% slip free performance- OUT OF STOCK
Brand New Genuine OEM front differential This is the visco 4lok model which has the electronic locking mechanism Part number 705403049 replaces 705402700 This is found in the 2021+ G2 XMR, XTP and XXC models. You will need to transfer over your fill plug after filling this with gear oil. - OUT OF STOCK
NEW KFI Products Tiger Tail Tow System With 2 Inch Universal Receiver. Tow Rope Part Number 101120 And Receiver Part Number 101110. ATV and UTV retractable tow rope with a retractable design allowing for quick, easy, clean use for towing or as an anchor-line during poor underfoot winch operations Superior to a tow strap and wicked fast deployment 12' of 12,000 lb average breaking strength rope with wear resistant coating Self locking hook storage 3/16” grade 50 steel construction Fully sealed and lubricated mechanism tested to 14,000+ cycles Shot blasted and powder coated black for supreme durability Convenient operation and easy to use Quality built and dependable performance Rugged design for the toughest environments – no electrical parts to burn up Constant tension Keeps your gear clean – no more dirty tow straps to carry 100% serviceable components Made in USA 
NEW OEM Multifunction Gauge Speedometer Screen This display will show zero miles, your machine will need to be paired via BUDS (dealer type software) in order for this to function. Part number 710005253 Fits: 2021 NEO YELLOW Outlander 850 XMR 2021 NEO YELLOW Outlander 1000R XMR 2022 Outlander 850 XMR or XTP 2022 Outlander 850 MAX XTP 2022 Outlander 1000R XXC, XMR or XTP 2022 Outlander 1000R MAX LTD or XTP 2023 Outlander 850 XMR 2023 Outlander 850 MAX XTP 2023 Outlander 1000R XTP or XXC 2023 Outlander 1000R MAX LTD or XTP Please reach out to us if you are unsure on fitment. We are happy to confirm!
New Genuine OEM power steering stem bellow for Outlander and Renegade. This will only fit power steering (DPS) models. Will not work on NON power steering bikes. Will come as pictured. Part number: 709400674
Top End Gasket Kit, 93mm Bore, .018″ MLS Cylinder Head Gasket
Big bore GASKET KIT for 650/800 based engines.
MLS (Muti Layer Steel) Cometic head gaskets and steel base gaskets, OEM paper base gaskets are recommended as the steel base gaskets require the surface to be perfect.
Gold/ Yellow/ Blue 200-400 0951-1013
NEW MRRPM Upper Motor Mount for installing 'big block" 1000 engines into a G1 chassis Steel, black in color- OUT OF STOCK
New Genuine OEM Mounting kit sold separately Part number 715003811
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.