All Balls complete module, retaining nut and gasket This fits many G2 model ATVs please contact us if you have fitment questions. Part number: 1009-0139 47-1024 Replaces OEM numbers: 709000287 709000758- OUT OF STOCK
Set of 13 CVT cover screws with the Torx heads. Stainless less likely to rust and strip out inserts. Comes as a set of 13 Part number 420440561 Interchanges with 420440568 420440567 
There are a few options for kits, please verify your differential uses this style of gears before ordering!
This will only fit six mounting hole differentials.
Late G1 Early G2 Standard Rear Differential Ring 36t and Pinion 10t gear set Pinion bolt size is M10, this may be different than what you are replacing.
OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. This kit should be installed by an experienced technician.
Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4? (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16" (14mm) The pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
Kit includes one universal boot, one reusable cone tool, two stainless steel clamps, grease pack, and silicone cone lube and instructions Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement Lithium based molybdenum grease ensures good lubrication for long CV joint life XL version of the original EZ Trail boot designed to fit UTVs and large ATVs Material is expandable yet tough enough to be a permanent fix Two clamping diameters ensure a good fit on most vehicles Boot material stays flexible in extreme cold temperatures
New XPS SAE 75W-90 and 75W-140 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box 1 U.S QT 946ml per bottle Listing is for 2 Quarts. See your owners manual before ordering to make sure you order the correct weight for your Can Am Part number 779160 and 779158
New XPS SAE 75W-140 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box 1 U.S QT 946ml per bottle Listing is for 2 Quarts. See your owners manual before ordering to make sure you order the correct weight for your Can Am Part number 779160
XPS SAE 75W-90 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box. 1 U.S QT 946ml per bottle This listing is for 2 quarts See your owners manual before ordering to make sure you order the correct weight for your Can Am 779158
USED Left Upper A-arm will fit 2006-2012 Outlander 650's and 800's. Will work in place of the black steel arms Comes as pictured bare arm
USED Right Upper A-arm will fit 2006-2012 Outlander 650's and 800's. Will work in place of the black steel arms Comes as pictured bare arm
G1 2006-2007 atv’s with non reservoir shocks. Your shock body should measure 1.5 inches 25% stiffer over stock springs, great alternative to lift pucks. Rears will retain the factory short spring Will not fit 400/500 struts. WE322010 WE322000
2008-2012 G1 ATV EPI HEAVY DUTY SPRING SET Your shock body should measure 1.5 inches 25% stiffer over stock springs, great alternative to lift pucks. Will not fit 400/500 struts. WE325107 WE325104
Can Am G2 2012-2018 Outlander XT XTP bumper cap kits Will not fit G1 or G2L models, questions on fitment? Please ask! Comes with 1 Front LEFT or RIGHT Rear cap 1 Backing plate 2 Torx screws Will only work on front right or left rear of machine as you sit on it. All parts are New OEM Part Numbers: 705004409 705004987 250000720
Can Am G2 2012-2018 Outlander XT XTP bumper cap kits Will not fit G1 or G2L models, questions on fitment? Please ask! Comes with 1 Front RIGHT or LEFT Rear cap 1 Backing plate 2 Torx screws Will only work on front right or left rear of machine as you sit on it. All parts are New OEM Part Numbers: 705004410 705004987 250000720
New OEM 2019+ rear differential gear set, 10/36 tooth straight cut ring and pinion gear set, Timken seals, NTN or IKO pilot bearing , OEM shim kit and OEM bearings along with a new bolt and washer to retain the driveshaft. BRP claims 25% increase in load capacity on this gear set vs the spiral cut xmr final drive units (rear differentials) from 13-18 models. Fits differential part numbers: 705502808, 705502546, 705502178, 705502090 703501031 705501550 705501556 705501557
New Genuine OEM Mounting kit sold separately Part number 715003813 Orange Crush matches 2020 and prior models.- OUT OF STOCK
All Balls complete fuel pump module, retaining nut and gasket This fits G1 Models: 2009-2015 EFI Outlander 400 2009-2012 Outlander or Renegade 500 2009-2012 Outlander 650 2009-2011 Outlander 800R 2012 Outlander 800R XMR 2012 Outlander 800R MAX 2009-2011 Renegade 800R Part number: 47-1049 24-71022 Replaces OEM numbers: 703500766 703500781 709000194 709000245 
Can-am Style Plastic Fender rivet set. NEW Pack of 25 For 8mm (5/16?) holes great for holding plastic fenders together, works on Maverick, Commander, Outlander and Renegade Replaces part numbers 293150089 293150230
EPI brand Wheel bearing Greaser Tool for bearings with 30mm inner diameter Quick and easy way to extend the life of your wheel bearings 10 pumps of marine rated grease into a new wheel bearing will extend the bearing’s life High quality CNC machined with precision drilled grease channel Axle stub needs to be removed to use the tool. Part numbers: 3811-0094 CA30MMGREASER-O
One spark plug boot, this is used on many applications 2020 and older, if you are unsure on fitment, please contact us.
Part number 420265248
Replaces 710000041 and 420265240
New OEM Cylinder Head Gasket Fits Defender HD5 Outlander 450 and 850 Renegade 850 Will come as pictured Part number 420450340
New OEM Ignition and Match keys. Comes with main key and back up key. These are not the electronic black keys, these are cut keys to match the ignition switch. 3 way key position (controls headlights also). Part number 710002323
Aftermarket Four wheel drive servo motor.
This is what engages the sliding collar putting power to the front differential.
Replaces oem 715900614 4151 29174 420891087
Rear Differential Seal kit for differentials with 80mm outer diameter pinion seal
1 Pinion Seal, 80mm
2 Axle Seals, 52mmBrands we use include : Timken, Dichtomatik and SKF
Fits:
2013 to Current Outlander 1000/1000R XMR
2015 to Current Outlander 800/850 Xmr
2016 to Current Renegade 1000R XMR
2019 to Current 650 and Larger ATVs
Also some 2019 to Current 570 XMR (measure your parts to verify fitment)*** THIS WILL NOT WORK IN 2013-2018 650/570 XMR or 2011/2012 800 XMR machines. If you are unsure about fitment please contact us! ***
5280 Rear Differential Tapered Roller Bearings and Seal kit 1 Pinion Seal, 80mm outer diameter 2 Axle Seals, 52mm outer diameter 1 Thick Tapered Roller Bearing 3 Thin Tapered Roller Bearing 1 Needle Bearing These are High Quality aftermarket parts, as good or better than OEM! Brands include FAG, NTN, IKO, TIMKEN, KOYO, SKF, Dichtomatik. BRP does not sell these bearings alone, we have taken the guess work out of replacing these parts. Fits: 2019 to Current 650 and Larger ATVs 2013 to Current Outlander 1000/1000R XMR 2015 to Current Outlander 800/850 XMR 2016 to Current Renegade 1000R XMR some 2019 to Current 570 XMR (measure your parts to verify fitment) *** THIS WILL NOT WORK IN 2013-2018 650/570 XMR or 2011/2012 800 XMR machines. If you are unsure about fitment, please contact us! *** Fits differential part numbers: 705502808, 705502546, 705502178, 705502090
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.