MOOSE UTILITY Shifter Cable Part Number 0652-2425 Replaces OEM number 707002000 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 60 inches long from end to end Fits: Two passenger 2018+ Maverick Trail Sport 800 1000 1000R and 2021+ Commander 1000R
Kit includes one universal boot, one reusable cone tool, two stainless steel clamps, grease pack, and silicone cone lube and instructions Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement Lithium based molybdenum grease ensures good lubrication for long CV joint life XL version of the original EZ Trail boot designed to fit UTVs and large ATVs Material is expandable yet tough enough to be a permanent fix Two clamping diameters ensure a good fit on most vehicles Boot material stays flexible in extreme cold temperatures
Can-am Style Plastic Fender rivet set. NEW Pack of 25 For 8mm (5/16?) holes great for holding plastic fenders together, works on Maverick, Commander, Outlander and Renegade Replaces part numbers 293150089 293150230
One spark plug boot, this is used on many applications 2020 and older, if you are unsure on fitment, please contact us.
Part number 420265248
Replaces 710000041 and 420265240
Cast Aluminum Valve cover set with Stainless bolts. Replaces your factory plastic valve covers on any can-am V-twin ATV or UTV 500/570/650/800/850/1000/1000R Replaces OE Numbers: 420610390 420610394 420610393 420610395
Brand New Genuine OEM BRP logo sticker 68mm size
NEW OEM Timing Chain Housing O ring Order two per Vtwin engine Part number 420430370 420430373
NEW CV Tech Primary Clutch Puller for can am ATVs Replaces OEM puller part number 529035746 7/8" Hex Head Measurements listed in picture We have found this to work on both the ATV factory primary and CV tech primary clutches. THIS IS NOT A TOOL RENTAL, IF YOU USE THE TOOL YOU OWN IT!
NEW Gboost Primary Clutch Puller. DCP19 Fits: Can-Am Defender 2016-20 HD8 DH10 Maverick Trail 2018+ Maverick Sport (all) 2018+ Maverick X3 (all models) 2017+ Replaces oem 529000064 All GBoost pullers start out with annealed, cold-rolled alloy steel. Oil Quenched Tempered Rockwell hardness between 50-55 Zinc plated to prevent rust and thread deterioration Machined to exact specifications in the U.S.A. This results in 31% higher tensile strength 19% higher yield strength Stronger than any existing OEM pullers
New Genuine OEM Wide angle convex mirror Can be used with or without windshield, roof, or cab enclosure Part number 715003638- OUT OF STOCK
New Genuine OEM fuel cap 709000868 Fits 2016-2020 Defender HD5, HD8, and HD10 2017-2020 Defender Max HD8 and HD10 2018-2020 Maverick Trail 800R and 1000 2019-2020 Maverick Sport 1000 and 1000R 2019-2020 Maverick Sport Max 1000 and 1000R 2017-2020 Maverick X3 and Maverick X3 Max 
710004814 OEM switch Used on some 2016-19 Maverick Sport Maverick Trail Maverick X3 and Defender- OUT OF STOCK
Brand new Genuine OEM air filter Fits 2016-Current Defenders HD5, HD8, and HD10’s both 3 and 6 seat machines Fits 2018-Current Maverick Trail 800 and 1000’s Fits 2019-Current Maverick Sport 1000 Part number 715900394 - OUT OF STOCK
New Genuine OEM Comes with 3 programmable keys Work key: Limits vehicle speed to 40 kph (25 mph) but does not limit engine torque. Normal key: Defender models: Limits vehicle speed to 70 kph (44 mph) and 10% torque reduction. Maverick Trail & Maverick Sport models: Limits vehicle speed to 70 kph (44 mph) and 50% torque reduction. Performance key: No restrictions. Part number 715002458 
Left Side (Drivers) Front One Caliper Set Part number: DP572 Replaces OEM # 715900379 715900386 Fits 2018+ Maverick Trail 800/1000 2019+ Maverick Sport 1000/1000R 2016+ Defender HD5/HD8/HD9/HD10 2017+ Maverick X3 DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
Right Side (Passenger) Front One Caliper Set Part number: DP573 Replaces OEM # 715900380 715900387 Fits 2018+ Maverick Trail 800/1000 2019+ Maverick Sport 1000/1000R 2016+ Defender HD5/HD8/HD9/HD10 2017+ Maverick X3 DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
Front and Rear Seals for the engine thru shaft. These are high quality Timken brand seals Replaces OEM part numbers: 420430589, 420430580, 420850055
Drive Belt Can Am Fits: 2017-2020 Maverick X3 900HO Turbo R Turbo RR 2017-2020 Maverick Trail/Sport 800R, 1000, 1000R 2016-2020 Defender HD10/HD8
Replaces OEM # 422280651 / 417300383 / 422280654 / 422280652 Gates Part number 48R4289 If you have fitment questions, please ask, we are here to help.
IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT.
FEATURES AND BENEFITS
Designed for the most demanding, turbo-charged off-road CVT applications. With Gates proprietary materials and design, G-Force™ RedLine™ CVT belts handle extreme temperatures with excellent heat recovery, while maximizing load and torque capacity - making it one of the most efficient CVT belts currently on the market.- First on the market to utilize Ethylene Elastomer compound to address the needs of larger SxS and high-horsepower ORVs in tough riding conditions.
- Next-generation EE compound offers maximum transverse stiffness and heat resistance, resulting in higher load capacity, higher peak torque capacity, less “heat fade” and less speed loss.
- Delivers 75% greater dynamic axial stiffness on average, up to 50% lower speed losses and better recovery from temperatures up to +170°C (+338°F) without power loss.
- Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F).
- Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing.
- Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
DON’T BREAK YOUR BELT. BREAK IT IN.
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these steps to ensure the best performance and longest life from your G-Force™ belt.
1. Clean the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. Be sure your breather tubes are free of any belt material (broken belt material gets everywhere)
2. Install and Break It In. Perform two heat cycles (10-15 minutes each) at +27°C (+80°F) at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of +16°C (+60°F) or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Drive Belt Can Am Fits: 2017-2020 X3 Maverick Turbo R Turbo RR 900HO 2017-2020 Maverick Trail/Sport 800R, 1000, 1000R 2016-2020 Defender HD10/HD8 OEM # 422280651 / 417300383 / 422280654 / 422280652IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT.FITMENT QUESTIONS?? PLEASE ASK!World’s Best Belt Line- Latest generation heavy-duty, high-twist Aramid Fiber cord for HIGH HORSEPOWER TENSILE LOAD requirements. Making it the strongest belt on the market.
- Highest shock load rating to date being able to withstand the power of the 400hp machines.
- Increased top cog pressure load design that increases sidewall rigidity, prevents top cog bowing, but still allows for increased rotational flexibility.
- Bottom cog uses HIGH MODULOUS RUBBER COMPOUND (BZX1) for better heat resistance and heat dissipation.
- Bottom cog is impregnated with short Aramid Fibers for better belt-to-sheave adhesion and reduced overall belt temperature.
- Latest bottom cog design for greater rotational efficiency at full shift.
- Precision ground sidewall angle (SCUFFING) for smooth engagement, increased power transfer and lower operating belt temperature.
- Aramid Fiber cord, versus polyester, wraps over bottom cogs for increased bottom cog strength.
- Increased cord pop-out resistance.
NEW Black Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121B, ALUGB14BX
NEW Chrome Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121, ALUG14BX
New Genuine OEM Convex mirror for wide visibility Ball-joint design with tightening knob for steady multi-angle adjustment Can be used with or without roof or windshield Part number 715004924- OUT OF STOCK
Brand New OEM spring kit Helps Stiffen your suspension Reduces vehicle sag when shocks are under heavy demand Perfect for machines with snow plows Kit part number 715004961 
Full rear mesh screen reduces windshield backdraft for added cabin comfort. Installs quick and easily on roll cage. Large Can-Am branding. Part Number 715003664- OUT OF STOCK
New Genuine OEM Fan Current part number 709200665 Works on 2018-Current Maverick Trail 800 and 1000 2019-Current Maverick Sport 1000 
New Genuine OEM Fits 2017-2020 Maverick X3 and Maverick X3 Max 2019-2020 Maverick Sport Old part number 707800855 Current part number 715900422
Air Pressure sensor, this goes in the Black plastic Intake manifold. Will work on any 2006 to current Can am Outlander, Renegade, Commander, Maverick, Defender 500 570 650 800 850 1000 XT XMR MAX or XXC The Manifold Absolute Pressure sensor or MAP sensor is a sensor that is attached to the intake manifold. The MAP sensor responds to changes in the intake manifold pressure (vacuum) and provides a reading of engine load. How it works is 5 volts DC is supplied to the sensor from the ECU. Inside the MAP sensor there is a resistor that moves in relation to intake manifold pressure. The resistor varies the voltage between about 1V to 4.5V (depending on engine load) and that voltage signal is returned to the PCM to indicate manifold pressure (vacuum). This signal is essential for the PCM to determine fuel delivery. Part numbers: 420874650 707000564 707000995 0 261 230 030 ALFA ROMEO 46553045 ALFA ROMEO 46533518 CHERY S21-3614021 FIAT 46553045 FIAT 77364869 FIAT 7084986 FIAT 0000046553045 FIAT 46533518 LANCIA 46533518 LANCIA 0000046553045 LANCIA 46553045 MOOSE 2120-0994 PROTON PW810694 ROTAX (BOMBARDIER-ROTAX GMBH) 874 650 SCANIA 5166434
800/1000 Top end Gasket set Includes: 2 Head Gaskets 2 Cylinder Base Gaskets 2 Valve Cover Gaskets 2 Exhaust port crush gaskets 2 Intake Manifold Seals 8 valve seals Various O rings for fuel injectors, coolant fittings etc.. Moose gaskets are made to the same high quality standards as OEM. Part number 0934-3017
NEW AFTERMARKET STARTER SPRAG VTWIN Starter Clutch One Way Bearing for Can-Am Will come as pictured Replaces OE Part Numbers:420659112 420659111 420659261 420659263 420659260
NEW AFTERMARKET STARTER VTWIN Will come as pictured Part Numbers: 420684560 420684562 420684568 420684566
New All Balls Racing Engine Air Filter Part number 48-1012 10 inches tall 5 inch diameter Replaces OEM 715900394 Fits 2016-Current Defenders HD5, HD8, and HD10's both 3 and 6 seat machines Fits 2018-Current Maverick Trail 800 and 1000 Fits 2019-Current Maverick Sport 1000
New All Balls Racing fuel sending unit. Part numbers: 47-1027 1009-0128 Will ship as pictured, sending unit, pump, cap and gasket. Replaces part numbers: 709000836 709001056 Found on: Maverick X3 Maverick Sport Maverick Trail If you have fitment questions please let us know, we are here to help.
Brand NEW aftermarket primary clutch two way bearing with shims Current part number 22-51782 Includes new bearing and two washers This two way bearing service kit includes everything you need to replace the two way bearing on the primary clutch. The thrust washers install on either side of the two way bearing. Replacing this bearing is a great place to start if you experience hard shifting, creeping while in gear or premature belt failure. This kit replaces the two way bearing, 42083235, 420233418 and both thrust washers 420427220 Will not fit mavericks with a rear driveshaft, if you have fitment questions please reach out, we are here to help.
Brand New Genuine OEM BRP logo sticker 20mm diameter Part number 516006224 replaces 219902677 704904616
Fitment: DCP30 Can-Am Drive clutch governor cup puller
Replaces DPC25OEM 529036350
2015-18 Maverick 1000R Turbo
2017+ Maverick X3 Turbo (including P drive)
2018+ Defender HD8 HD10
2018+ Maverick Trail 800R 1000 1000R
2019+ Maverick Sport 800R 1000 1000R
2020+ Commander 800R 1000RAides in safe disassembly of the drive clutch for servicing.
Use with Gboost drive clutch puller # TOOL31SDGBOOST Instructional Video CLICK HERE
Features:
All GBoost® pullers start out with annealed, cold-rolled alloy steel.
Oil Quenched
Tempered
Rockwell hardness between 50-55
Zinc plated to prevent rust and thread deterioration
Machined to exact specifications in the U.S.A.
This results in31% higher tensile strength
19% higher yield strength
Stronger than any existing OEM pullers
30amp five pin relay OE supplier Song Chuan Replaces OE numbers 278002822 278002168 710001334 515176774 710000739 515176774
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.