Brand New OEM PTO Cover Gasket for V-Twin Engines Part number 420651211
SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Cam Chain and Guide Set for V Twin 1000 Order QTY 1 (one) per engine. Kit includes: 2 Silent Chains 420297068 2 Pivot Guides 420436017 2 Fixed Guides 420236583 2 Bottom Guides 420236350 ONLY WORKS WITH 1000 V TWINS To install the timing chain kit you will need to remove the PTO Cover, Stator Cover, and cylinder heads. We sell the gaskets and pullers required to do this. Check our other listings for these products
Can Am Maverick 1000R secondary spreader M25x1.5 thread size, to verify fitment 100% measure your clutch where this threads in. This works on the QRS style secondary clutches pictured. This will NOT work on the X3 models Bolt is not included Part number 708200504
SHIPS FREE TO THE LOWER 48 STATES Set of Bearings and Seals to Rebuild Your Front Differential on Your Can-Am Fits Most Can-Am Models from 2007-Current (WILL NOT FIT Maverick X3/Sport/Trail or Defender) This Kit has High Quality Aftermarket Bearings which are: Timken, SKF, NSK, KOYO, Nachi Comes with: 2 - Carrier Bearings- SKF Brand 2 - Axle Bearings- OEM NSK Japan made 2 - Axles Seals- Timken 1 - Inner Pinion Bearing- Nachi Japan made 1 - Large Pinion Bearing- Koyo Japan made 1 - Pinion Seal
SHIPS FREE TO THE LOWER 48 STATES OEM Outer CVT Cover 2013 Maverick 1000R ONE Breather hole in front of Primary clutch. This is the cover with the most room. Common to use this on newer Vtwin Mavericks with aftermarket clutches that do not require the extra breathers. Current Part Number: 420612313 replaces 420612312 Will not fit Maverick X3/Sport/Trail
Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Current part number 703500943 Replaces part numbers: 708001085 708001102 708001318
SHIPS FREE TO THE LOWER 48 STATES Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Part number 703500945 Replaces 708001316
Front and Rear Seals for the engine thru shaft. These are high quality Timken brand seals Replaces OEM part numbers: 420430589, 420430580, 420850055
New Can Am spark plug boot connector part number 420265020 Will only work with spark plug style that is pictured Easy to replace. Just unscrew your old one and screw on your new one. Fits: 2013-2018 Maverick 1000R Turbo or Non Turbo 2018-2020 Commander 1000R 2016-2020 Outlander or Renegade 850/1000R 2015+ Outlander 450
Brand new Genuine OEM flexible CVT intake adaptor for Renegade, Outlander, Maverick, and Commander.
This replaces the thin rubber boot that comes on many early CanAm V-Twin models.
Very nice upgrade for a cracked CVT intake boot.
Current part number 707002585
Previous part numbers 707001467, 707001043, 707000719
CVT Rear Boot (the boot that connects to the exhaust side of the inner CVT cover plate. This is the updated part and will work on all G1 V-Twin ATV’s . This replaces 707000789, this newer style will not work on the xmr 2011-12 where the exhaust riser pipe meets the upper tube. Current Part Number 707001274
Can-am Style Plastic Fender rivet set. NEW Pack of 25 For 8mm (5/16?) holes great for holding plastic fenders together, works on Maverick, Commander, Outlander and Renegade Replaces part numbers 293150089 293150230
New Can Am Maverick Rear Differential Pinion Seal This is a New Genuine OEM seal Part number 705501933 New updated part number 705502276 Press fit into differential, then seals against wear ring (if your driveshaft requires one) If your wear ring is grooved you should replace it.- Sale!
New take off gearbox side, 20 spline yoke. This fits on large gearboxes output shafts. 20 spline yoke partially machined to accept a protector ring. This is the forward most yoke on the REAR driveshaft. Works with 398 U joints. found on Vtwin rear driveshafts. Part number 715900129 replaces 705501373 and 715900234 
20 Spline Yoke with Wear ring installed. Fits: XMR 1000, Maverick and '14&newer Commander style Rear differentials. These yokes are made to very tight tolerances, if you are not careful when installing these you can damage the yoke or your pinion shaft. We recommend you take your time and clean the pinion gear before installing. ---Great for custom applications--- Uses Factory size U joint (398 at the auto parts store) Part numbers 715900271 705400036
New short wiring harness for rear tail lights Will need to be wired in to work. This plugs in to Tail light part number 710001645 Fits: G2 ATV's with dual tail lights, Commanders, and Mavericks (non X3/Sport/Trail)
HD Clutch bolt set for most every Can-am V-twin 2006 to current. Will not work on: Maverick Turbo Maverick X3 Maverick Sport Maverick Trail Defender These will swap out the factory Torque To Yield (TTY) bolts/studs. M10 and M12 Black-Oxide Alloy Steel Socket Head Bolt These are class 12.9 bolts, with a tensile strength of 170,000 psi, these alloy steel bolts are stronger than Grade 8 steel bolts. 8 and 10mm Allen Sockets required to install these bolts. 18-8 Stainless Steel Single-Wave Washers included, these help prevent loosening, use with your existing washers. Installation Torque Specs: 80 ft·lb On the Primary Bolt 45 ft·lb On the Secondary Bolt (red thread locker recommended, allow to set up overnight)
Outlander Renegade Commander Maverick Differential Drain Plug Brand New Genuine OEM Drain Plug 9.9 mm outside diameter Will fit on some fronts and rears be sure yours looks like this one and measures the same Part Number 705500894
NEW Prop Shaft Low profile pair of clamps for 715900118 boot. Clamps also work for G2 front shaft boot 705401093. The last few pictures show the clamps loose, then installed nice and tight. Sold in pairs enough to do one boot.
Please verify your differential uses this style of Seals before ordering! Can Am Front Differential Pinion and Axle Seals (Timken) Fit on most all 2006-2019 Outlanders and Renegades Also fits Commanders and Mavericks (non X3/Sport/Trail) The Pinion Seal has a 70mm Outer Diameter And the standard 37mm inner diameter. Replaces part numbers 705401481 705500255 705500081 The Axle Seal has a 47mm Outer Diameter And the standard 25mm inner diameter. Replaces part numbers 705401618 705401486 Complete Seal kit for Standard Front Differentials
New Genuine OEM CVT Cover Drain Plug This clamps on to your outer cvt cover. Part number 707001179
NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
OEM Rotax Piston Ring Set for 400, 800, and 1000cc engines 91mm bore size Complete kit for one factory piston Part Numbers: 420296774 420685244
OEM Canam Insert, this holds cab interior panels together in your maverick or commander. Part Numbers: 707900133 503189273
OEM Can Am washer for plastic insert 707900133 This is ONLY for the washer Insert is NOT included (only pictured for reference) Part Number: 503189273
NEW OEM Wheel Center Cap Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
NEW OEM Wheel Center Cap Set of Four Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
Can Am Commander or Maverick Wheel Stud M10 Stud diameter 27.5mm spacing for brake rotor Part number 250300060 replaces 250300051
Can Am Maverick 1000R secondary spreader M25x1.5 thread size, to verify fitment 100% measure your clutch where this threads in. This will only fit Quick Response System (QRS) Secondary clutches, as pictured. This style of driven clutch is found on 2015-2018 1000R Turbo Mavericks and the 2017-2018 XMR Mavericks This will NOT work on the Maverick X3/Sport/Trail models please see our other listings for those. Bolt is included Part number 708200504- OUT OF STOCK
Brand New Genuine OEM XPS Synthetic Blend Oil Change Kit. Ultra convenient “all in one” kit saves time and money. For Can-am off road vehicles with 500cc or larger Rotax engines. Excludes Traxter and Quest. Not compatible with Maverick X3 Includes 2 quarts plus 1 16 fl oz of 4T synthetic oil 5W40, 0-rings, rotax oil filter, and copper washer for old style and new style drain plugs. May not ship in original box Part Number: 779258 
Brand New Genuine OEM Fill Level Plug Be sure that yours looks the same due to other styles for front or rear differential from different years M14 diameter 1.5 thread pitch Part number 705500504
Moose Racing Air Filter Part Number 1011-2796 Fits SXS pictured: Commanders 800/1000 and Maverick 1000R (non turbo) (non X3/Sport/Trail) Engineered for maximum air flow, increasing horsepower Maintains premium protection by stopping the finest dust particles Flexible seams that will not crack Filters are designed to fit all stock air boxes Made in the U.S.A. Replaces OEM 707800327
NEW OEM Can-am Output Crank Shaft Seal This is the engine out put shaft seal, pressed into the crankcase PTO cover 34mm Inner Diameter 52mm Outer Diameter 8mm Thick Current Part Number 420631933 Replaces Part Number 420631932
SHIPS FREE TO THE LOWER 48 STATES! Can-am NEW OEM Main bearing set. Kit includes: Main Bearing Half with Oil hole 420233965 x2 Main Bearing Half without Oil hole 420233960 x2 PTO Cover Bearing 420233995 Be sure to mark your cases before pressing them out! The oil holes need to be lined up!
BOYESEN SUPERCOOLER WATER PUMP Cover and Impeller Kit Increased coolant flow at all rpm ranges Patented Nautilus-style impeller for hydrodynamic efficiency Color/Finish: Black, Powder-Coated Material: Aluminum Model: Supercooler Part number 0932-0166 WPK-80B Replaces OEM 420222505 420222785 703501124 This is the style with the smaller output nipple roughly 7/8 inch in outer diameter.
OEM O ring this seals the gearbox oil, it is installed on the rear through shaft bearing housing. Roughly two inches in diameter. Part Number 420230306 replaces 420230305
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.