Defender

  • Fitment: DCP30 Can-Am Drive clutch governor cup puller

    Replaces DPC25OEM 529036350

    2015-18 Maverick 1000R Turbo
    2017+ Maverick X3 Turbo (including P drive)
    2018+ Defender HD8 HD10
    2018+ Maverick Trail 800R 1000 1000R
    2019+ Maverick Sport 800R 1000 1000R
    2020+ Commander 800R 1000R

    Aides in safe disassembly of the drive clutch for servicing.
    Use with Gboost drive clutch puller # TOOL31SD

    GBOOST Instructional Video CLICK HERE

    Features:

    All GBoost® pullers start out with annealed, cold-rolled alloy steel.

    Oil Quenched
    Tempered
    Rockwell hardness between 50-55
    Zinc plated to prevent rust and thread deterioration
    Machined to exact specifications in the U.S.A.
    This results in

    31% higher tensile strength
    19% higher yield strength
    Stronger than any existing OEM pullers

  • Brand New Genuine OEM BRP logo sticker 20mm diameter Part number 516006224 replaces 219902677 704904616
  • Brand NEW aftermarket primary clutch two way bearing with shims Current part number 22-51782 Includes new bearing and two washers This two way bearing service kit includes everything you need to replace the two way bearing on the primary clutch. The thrust washers install on either side of the two way bearing. Replacing this bearing is a great place to start if you experience hard shifting, creeping while in gear or premature belt failure. This kit replaces the two way bearing, 42083235, 420233418 and both thrust washers 420427220 Will not fit mavericks with a rear driveshaft, if you have fitment questions please reach out, we are here to help.
  • New All Balls Racing Engine Air Filter Part number 48-1012 10 inches tall 5 inch diameter Replaces OEM 715900394 Fits 2016-Current Defenders HD5, HD8, and HD10's both 3 and 6 seat machines Fits 2018-Current Maverick Trail 800 and 1000 Fits 2019-Current Maverick Sport 1000
  • NEW AFTERMARKET STARTER VTWIN Will come as pictured Part Numbers: 420684560 420684562 420684568 420684566
  • NEW AFTERMARKET STARTER SPRAG VTWIN Starter Clutch One Way Bearing for Can-Am Will come as pictured Replaces OE Part Numbers:420659112 420659111 420659261 420659263 420659260
  • Aftermarket Fuel pump kit with pickup sock lines and seal Part number 1009-0090 Works with:  2016+ Defenders HD5 HD8 HD10 Outlander 450/570 and Renegade 570 Replaces the pump in sending units part numbers 709000461 and 709000662
  • NEW MOTUL 10W-40 Oil Change Kit 105938. Technosynthese – Ester lubricant developed for the latest generation of ATV / UTV used for recreational or utility activities. High temperature resistance, meets or exceeds requirements for API SM, SL, and SJ standards. Technosynthese is an ingenious combination of synthetic and high quality mineral base stocks for optimal performance and price competitiveness. Kit Includes: Three Liters of MOTUL 10W-40 Oil K&N Oil Filter KN-152 replaces OEM 420256188 711256188 Filter cover O ring Both sizes of drain plug crush washers
  • 800/1000 Top end Gasket set Includes: 2 Head Gaskets 2 Cylinder Base Gaskets 2 Valve Cover Gaskets 2 Exhaust port crush gaskets 2 Intake Manifold Seals 8 valve seals Various O rings for fuel injectors, coolant fittings etc.. Moose gaskets are made to the same high quality standards as OEM. Part number 0934-3017
  • Air Pressure sensor, this goes in the Black plastic Intake manifold. Will work on any 2006 to current Can am Outlander, Renegade, Commander, Maverick, Defender 500 570 650 800 850 1000 XT XMR MAX or XXC The Manifold Absolute Pressure sensor or MAP sensor is a sensor that is attached to the intake manifold. The MAP sensor responds to changes in the intake manifold pressure (vacuum) and provides a reading of engine load. How it works is 5 volts DC is supplied to the sensor from the ECU. Inside the MAP sensor there is a resistor that moves in relation to intake manifold pressure. The resistor varies the voltage between about 1V to 4.5V (depending on engine load) and that voltage signal is returned to the PCM to indicate manifold pressure (vacuum). This signal is essential for the PCM to determine fuel delivery. Part numbers: 420874650 707000564 707000995 0 261 230 030 ALFA ROMEO 46553045 ALFA ROMEO 46533518 CHERY S21-3614021 FIAT 46553045 FIAT 77364869 FIAT 7084986 FIAT 0000046553045 FIAT 46533518 LANCIA 46533518 LANCIA 0000046553045 LANCIA 46553045 MOOSE  2120-0994 PROTON PW810694 ROTAX (BOMBARDIER-ROTAX GMBH) 874 650 SCANIA 5166434
  • NEW Chrome Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121, ALUG14BX
  • NEW Black Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121B, ALUGB14BX

Title