New Genuine OEM 2 Gallon (8L) polypropylene injected storage bin Watertight to keep ice and drinks cold Easy install and removal for quick and easy cleaning Part number 715003446
OEM Rotax Piston Ring Set for 400, 800, and 1000cc engines 91mm bore size Complete kit for one factory piston Part Numbers: 420296774 420685244- OUT OF STOCK
Brand NEW OEM Genuine CVT Transmission Drive V Belt Will fit Maverick and X3. Will also fit other machines. Must check part numbers to confirm fitment. Will work on Ski Doo snowmobiles as well Current Part Number 417300531 Old Part Number 422280651 IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT. FITMENT QUESTIONS?? PLEASE ASK!
Right Side (Passenger) Front One Caliper Set Part number: DP573 Replaces OEM # 715900380 715900387 Fits 2018+ Maverick Trail 800/1000 2019+ Maverick Sport 1000/1000R 2016+ Defender HD5/HD8/HD9/HD10 2017+ Maverick X3 DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
Left Side (Drivers) Front One Caliper Set Part number: DP572 Replaces OEM # 715900379 715900386 Fits 2018+ Maverick Trail 800/1000 2019+ Maverick Sport 1000/1000R 2016+ Defender HD5/HD8/HD9/HD10 2017+ Maverick X3 DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
NEW Gboost Primary Clutch Puller. DCP19 Fits: Can-Am Defender 2016-20 HD8 DH10 Maverick Trail 2018+ Maverick Sport (all) 2018+ Maverick X3 (all models) 2017+ Replaces oem 529000064 All GBoost pullers start out with annealed, cold-rolled alloy steel. Oil Quenched Tempered Rockwell hardness between 50-55 Zinc plated to prevent rust and thread deterioration Machined to exact specifications in the U.S.A. This results in 31% higher tensile strength 19% higher yield strength Stronger than any existing OEM pullers
Aftermarket Fuel pump kit with pickup sock lines and seal Part number 1009-0090 Works with: 2016+ Defenders HD5 HD8 HD10 Outlander 450/570 and Renegade 570 Replaces the pump in sending units part numbers 709000461 and 709000662
NEW OEM BRP Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 715900265 Works with base digital dash, if you are unsure on fitment please contact us we will help.- OUT OF STOCK
Genuine OEM Radiator
2016-2020 Defenders HD5, HD8, and HD10
2017-2020 Defender Max HD8 and HD10
Part number 709200951 replaces 709200533
- OUT OF STOCK
New Genuine OEM Wide angle convex mirror Can be used with or without windshield, roof, or cab enclosure Part number 715003638 
NEW SEIZMIK STRIKE Side mirror set Both drivers and passengers side mirrors Pro Fit mounts for the goofy looking D shaped with a channel roll cage will not fit round cages We test fitted these on our defender with the OEM flip glass windshield, there is enough room for the bracket to mount and the windshield to seal as it should. Features: Adaptive 360 Bracket Rotation: Will accommodate any angle roll cage pillar & provide optimal viewing position, so you can mount it high or low and adjust to perfect position every time Full Breakaway Geometry: Designed to break away during impacts to prevent damage Convex mirrors more than double your field of rear view High-Impact ABS Plastic Housing: Resists damage Ball Socket Joint: Provides a broad range of viewing angles Heavy-Duty Steel Mounting Clamp: Low mass design provides maximum strength and durability Convex Mirror Surface: provides wider viewing ranger and image stabilization Shatter Resistant Safety Glass Position Tension Adjustment Bolt: Always be able to keep it tight as new UNLIMITED LIFETIME WARRANTY CANAM Cage Styles Defender: Pro Fit Cage Maverick Trail/Sport: Pro Fit Cage OG Maverick/Commander: Round 2.0” Part number 18093
NEW OEM Wheel Center Cap Set of Four Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
MOOSE UTILITY Shifter Cable Part Number 0652-2427 Replaces OEM numbers 707001468 707002227 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 112 inches long from end to end Fits three seat models: 2016-2019 Defender HD10/HD8/Hd5
New Genuine OEM 4 Gallon polypropylene injected storage bin Great for storing ropes, tow straps, and winch accessories Easy install (takes just a few minutes) Part number 715003399
New OEM bushing Will work on upper and lower a arm Part Number: 706201659 Will come as pictured- Sale!
Brand New Klotz Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. For Can-am off road vehicles with 500cc or larger Vtwin Rotax engines. Excludes Traxter and Quest. Not compatible with Maverick X3 Includes 3 quarts synthetic oil 10W50, 0-ring , Highflow HF152 oil filter, and copper washer for both old style and new style drain plugs. 10w50 oil, great for hot climates, temperature range -13*F to 122*F Will not ship in original box 
NEW OEM Can-am Defender, Maverick Sport/Trail or Maverick X3 front differential pinion seal. This is pressed into the front differential and seals against the front driveshaft. Measurements are : 79mm outside and 25mm inside 8mm thick Part number 705401827
NEW OEM BRP Drive Belt. Part number 422280225 This fits the big single cylinder models 2022+ Outlander 700 Outlander HD7 Pro Commander 700 Maverick Trail 700 Defender HD7 Traxter HD7 FITMENT QUESTIONS?? PLEASE ASK! Comes as pictured
Kit includes one universal boot, one reusable cone tool, two stainless steel clamps, grease pack, and silicone cone lube and instructions Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement Lithium based molybdenum grease ensures good lubrication for long CV joint life XL version of the original EZ Trail boot designed to fit UTVs and large ATVs Material is expandable yet tough enough to be a permanent fix Two clamping diameters ensure a good fit on most vehicles Boot material stays flexible in extreme cold temperatures
MOOSE UTILITY Shifter Cable Part Number 0652-2426 Replaces OEM number 707001721 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 145 inches long from end to end Fits four seat MAX models: 2017-2019 Defender HD10/HD8 MAX
NEW OEM BRP Hexagonal Screw M10X 61420441990
Fitment: DCP30 Can-Am Drive clutch governor cup puller
Replaces DPC25OEM 529036350
2015-18 Maverick 1000R Turbo
2017+ Maverick X3 Turbo (including P drive)
2018+ Defender HD8 HD10
2018+ Maverick Trail 800R 1000 1000R
2019+ Maverick Sport 800R 1000 1000R
2020+ Commander 800R 1000RAides in safe disassembly of the drive clutch for servicing.
Use with Gboost drive clutch puller # TOOL31SDGBOOST Instructional Video CLICK HERE
Features:
All GBoost® pullers start out with annealed, cold-rolled alloy steel.
Oil Quenched
Tempered
Rockwell hardness between 50-55
Zinc plated to prevent rust and thread deterioration
Machined to exact specifications in the U.S.A.
This results in31% higher tensile strength
19% higher yield strength
Stronger than any existing OEM pullers
New OEM Cylinder Head Gasket Fits Defender HD5 Outlander 450 and 850 Renegade 850 Will come as pictured Part number 420450340
FREE SHIPPING TO THE LOWER 48 STATES New OEM cover Will fit the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R Old part number 420212502 New part number 420212500 O-ring and drain plug cap are NOT included
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.