Brand NEW OEM BRP Genuine Transmission Drive Belt Will fit: Defender, Maverick Trail 1000/1000R Maverick Sport 1000/1000R Will also fit other machines. Must check part numbers to confirm fitment. Current Part Number: 417300551 Replaces 417300383 High performance drive belts calibrated to maximize your machine’s performance. Aramid tensile cords used in construction for extra long life and dependability, also delivers a consistent length. High tensile reinforced fiber elastomer undercords provide minimal dusting and long term flex life. Flexweave overcord for superior adhesion and crack resistance. Consistent performance during life of belt. Quality you can count on for optimum performance
New Set of Black ET Tusk Lug Nuts Sold as a set of 16 Great for use with wheels that accept 12mm studs. Perfect when installing x3 wheels on non x3 machines. Extended Thread 10mm x 1.25mm Thread Pitch w/14mm Head
Part Number 715008101
Molded heavy-duty aluminum mirror.
Stays in place on rough trails.
Ball-joint design for steady multi-angle adjustment and outstanding vision.
Use with or without any BRP roof, BRP windshield or BRP doors.
Fits either side.
Sold individually.
New OEM Differential Switch
Works on 2018-Current Maverick X3 with Smart-Lok
2019-Current Defender with Smart-Lok
Old part number 710005761
Current part number 710006040
RHINO ROLLER Kit 2 Pack Driven Clutch Upgrade Fitment: All Can-AM Models w/2 Roller Driven Clutch- 2015-2017 Maverick 1000R Turbo XDS-DPS / Max
- 2016+ Defender HD10 / MAX
- 2016+ Defender HD8 / Max
800/1000 Top end Gasket set Includes: 2 Head Gaskets 2 Cylinder Base Gaskets 2 Valve Cover Gaskets 2 Exhaust port crush gaskets 2 Intake Manifold Seals 8 valve seals Various O rings for fuel injectors, coolant fittings etc.. Moose gaskets are made to the same high quality standards as OEM. Part number 0934-3017
New Genuine OEM Works on 2014-2020 Commander and Commander Max (2011-2013 Do not have a oxygen sensor) 2013-2018 Maverick and Maverick Max 2017-2020 Maverick X3 and Maverick X3 Max 2018-2020 Maverick Trail 2019-2020 Maverick Sport 2017-2020 Defender and Defender Max If your machine has ECO mode it will have a oxygen Sensor from factory Part number 707600872
Moose 20amp four pin relay Replaces OE number 710001778
NEW AFTERMARKET OIL COOLER VTWIN Fit on the "big block" cases Will come as pictured Part Numbers: 420890180
Brand new Genuine OEM air filter Fits 2016-Current Defenders HD5, HD8, and HD10’s both 3 and 6 seat machines Fits 2018-Current Maverick Trail 800 and 1000’s Fits 2019-Current Maverick Sport 1000 Part number 715900394
New OEM Gasket Will fit the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R
Driven Pulley Extractor bolt for belt changes This spreads the secondary with the 708200686 adapter tool. Works with: Can Am Defender HD8 HD10 Part number 529036352
OEM Rotax Cylinder Base gasket Fits many Canam ATV’s/UTV’s 330 400 500 650 800 1000 Unsure on fitment? Please ask! Part number 420630210
Air Pressure sensor, this goes in the Black plastic Intake manifold. Will work on any 2006 to current Can am Outlander, Renegade, Commander, Maverick, Defender 500 570 650 800 850 1000 XT XMR MAX or XXC The Manifold Absolute Pressure sensor or MAP sensor is a sensor that is attached to the intake manifold. The MAP sensor responds to changes in the intake manifold pressure (vacuum) and provides a reading of engine load. How it works is 5 volts DC is supplied to the sensor from the ECU. Inside the MAP sensor there is a resistor that moves in relation to intake manifold pressure. The resistor varies the voltage between about 1V to 4.5V (depending on engine load) and that voltage signal is returned to the PCM to indicate manifold pressure (vacuum). This signal is essential for the PCM to determine fuel delivery. Part numbers: 420874650 707000564 707000995 0 261 230 030 ALFA ROMEO 46553045 ALFA ROMEO 46533518 CHERY S21-3614021 FIAT 46553045 FIAT 77364869 FIAT 7084986 FIAT 0000046553045 FIAT 46533518 LANCIA 46533518 LANCIA 0000046553045 LANCIA 46553045 MOOSE 2120-0994 PROTON PW810694 ROTAX (BOMBARDIER-ROTAX GMBH) 874 650 SCANIA 5166434
New OEM Torx Screws Comes as a set of 11 Will fit on the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R
NEW OEM Can-am Output Crank Shaft Seal This is the engine out put shaft seal, pressed into the crankcase PTO cover 34mm Inner Diameter 52mm Outer Diameter 8mm Thick Current Part Number 420631933 Replaces Part Number 420631932
NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
NEW AFTERMARKET STARTER SPRAG VTWIN Starter Clutch One Way Bearing for Can-Am Will come as pictured Replaces OE Part Numbers:420659112 420659111 420659261 420659263 420659260
New Genuine OEM Can Am Ignition Switch
Fits:
2016-2020 Defender
2018-2020 Maverick Trail
2019-2020 Maverick SportPart numbers 710004198 710007870
Drive Belt Can Am Fits: 2017-2020 X3 Maverick Turbo R Turbo RR 900HO 2017-2020 Maverick Trail/Sport 800R, 1000, 1000R 2016-2020 Defender HD10/HD8 OEM # 422280651 / 417300383 / 422280654 / 422280652IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT.FITMENT QUESTIONS?? PLEASE ASK!World’s Best Belt Line- Latest generation heavy-duty, high-twist Aramid Fiber cord for HIGH HORSEPOWER TENSILE LOAD requirements. Making it the strongest belt on the market.
- Highest shock load rating to date being able to withstand the power of the 400hp machines.
- Increased top cog pressure load design that increases sidewall rigidity, prevents top cog bowing, but still allows for increased rotational flexibility.
- Bottom cog uses HIGH MODULOUS RUBBER COMPOUND (BZX1) for better heat resistance and heat dissipation.
- Bottom cog is impregnated with short Aramid Fibers for better belt-to-sheave adhesion and reduced overall belt temperature.
- Latest bottom cog design for greater rotational efficiency at full shift.
- Precision ground sidewall angle (SCUFFING) for smooth engagement, increased power transfer and lower operating belt temperature.
- Aramid Fiber cord, versus polyester, wraps over bottom cogs for increased bottom cog strength.
- Increased cord pop-out resistance.
NEW Black Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121B, ALUGB14BX
NEW OEM Wheel Center Cap Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
30amp five pin relay OE supplier Song Chuan Replaces OE numbers 278002822 278002168 710001334 515176774 710000739 515176774
NEW OEM Timing Chain Tensioner Kit Sold as a Pair, enough to do one vtwin engine. Fits: 500 570 650 800HO 800R 850 1000 1000R engines. Part numbers 711641150 420641150 420430370 420430373 290250890 420250890 711238120 420238120 420236520 420236521 711236520 711236510 420236510
Brand New Genuine OEM BRP logo sticker 68mm size
NEW OEM Timing Chain Housing O ring Order two per Vtwin engine Part number 420430370 420430373
New OEM front differential axle seal
Outer diameter is 47mm
Inner Diameter is 25mm
Part numbers: 705401486 705401618
Can Am OEM lower ball joint Old part number is 706201393 706201576 Current part number is 706202045
Brand NEW OEM Genuine Transmission Belt 422280652 High Performance Drive V Belt TCIC (Turbo Charged Inter Cooled) Factory on 2020 Maverick X3 Turbo R R 195 HP models These will retro fit on all Maverick X3 models along with Defender H8/HD10 Maverick Sport/Trail. IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT. FITMENT QUESTIONS?? PLEASE ASK! Comes as pictured
Vertex water pump rebuild kit
Will fit all V-Twin Can-Am Engines
Part Number 680-1957 821957
Replaces OEM 420650370 420651190 420230415 420650310 420650315
Brand New OEM PTO Cover Gasket for V-Twin Engines Part number 420651211
BRAND NEW Can Am OEM Wheel Cap This is for a set of Four (4) Caps Part Number 705400928 There is more than one style. Please verify that this is the correct style BEFORE ordering.
Brand New OEM Stator Cover Gasket for V-Twin Engines. Fits 2006-Current V twin’s Part number 420651201
New Genuine OEM Works on 2016+ Defender and Defender Max Works on both driver and passenger doors Part number 710004979 replaces 705800048
NEW OEM Screw Part number 235381646 M8x16
New NGK Spark Plug 93444
OEM part number 715900352
NGK part number LMAR8D-J
These spark plugs work in 2015+ Outlander/Renegade 450 850 and 1000R also fits Defender HD5
Shell
Thread Diameter: 10mm
Thread Pitch: 1.0mm
Seat Type: Gasket
Reach: 26.5mm (1.04″)
Hex Size: 9/16″ (14mm)
Terminal Type: Solid
Gap: .031″ (0.8mm)Center Electrode
Material: Nickel
Type: Standard
Size: 2.5mm
Projection: ProjectedGround Electrode
Material: Nickel
Type: Multi-GroundSpecifications
Resistor: Yes
Resistor Value: 5k Ohm
Heat Range: 8
Torque Specs: Aluminum: 7.2-8.7 lb. ft.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.