New OEM Torx Screws Comes as a set of 11 Will fit on the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R
Air Pressure sensor, this goes in the Black plastic Intake manifold. Will work on any 2006 to current Can am Outlander, Renegade, Commander, Maverick, Defender 500 570 650 800 850 1000 XT XMR MAX or XXC The Manifold Absolute Pressure sensor or MAP sensor is a sensor that is attached to the intake manifold. The MAP sensor responds to changes in the intake manifold pressure (vacuum) and provides a reading of engine load. How it works is 5 volts DC is supplied to the sensor from the ECU. Inside the MAP sensor there is a resistor that moves in relation to intake manifold pressure. The resistor varies the voltage between about 1V to 4.5V (depending on engine load) and that voltage signal is returned to the PCM to indicate manifold pressure (vacuum). This signal is essential for the PCM to determine fuel delivery. Part numbers: 420874650 707000564 707000995 0 261 230 030 ALFA ROMEO 46553045 ALFA ROMEO 46533518 CHERY S21-3614021 FIAT 46553045 FIAT 77364869 FIAT 7084986 FIAT 0000046553045 FIAT 46533518 LANCIA 46533518 LANCIA 0000046553045 LANCIA 46553045 MOOSE 2120-0994 PROTON PW810694 ROTAX (BOMBARDIER-ROTAX GMBH) 874 650 SCANIA 5166434
Driven Pulley Extractor bolt for belt changes This spreads the secondary with the 708200686 adapter tool. Works with: Can Am Defender HD8 HD10 Part number 529036352- OUT OF STOCK
Brand new Genuine OEM air filter Fits 2016-Current Defenders HD5, HD8, and HD10’s both 3 and 6 seat machines Fits 2018-Current Maverick Trail 800 and 1000’s Fits 2019-Current Maverick Sport 1000 Part number 715900394 
OEM Rotax Cylinder Base gasket Fits many Canam ATV’s/UTV’s 330 400 500 650 800 1000 Unsure on fitment? Please ask! Part number 420630210
New OEM Gasket Will fit the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R
NEW AFTERMARKET OIL COOLER VTWIN Fit on the "big block" cases Will come as pictured Part Numbers: 420890180
Moose 20amp four pin relay Replaces OE number 710001778
New Genuine OEM Works on 2014-2020 Commander and Commander Max (2011-2013 Do not have a oxygen sensor) 2013-2018 Maverick and Maverick Max 2017-2020 Maverick X3 and Maverick X3 Max 2018-2020 Maverick Trail 2019-2020 Maverick Sport 2017-2020 Defender and Defender Max If your machine has ECO mode it will have a oxygen Sensor from factory Part number 707600872
800/1000 Top end Gasket set Includes: 2 Head Gaskets 2 Cylinder Base Gaskets 2 Valve Cover Gaskets 2 Exhaust port crush gaskets 2 Intake Manifold Seals 8 valve seals Various O rings for fuel injectors, coolant fittings etc.. Moose gaskets are made to the same high quality standards as OEM. Part number 0934-3017
RHINO ROLLER Kit 2 Pack Driven Clutch Upgrade Fitment: All Can-AM Models w/2 Roller Driven Clutch- 2015-2017 Maverick 1000R Turbo XDS-DPS / Max
- 2016+ Defender HD10 / MAX
- 2016+ Defender HD8 / Max
New Set of Black ET Tusk Lug Nuts Sold as a set of 16 Great for use with wheels that accept 12mm studs. Perfect when installing x3 wheels on non x3 machines. Extended Thread 10mm x 1.25mm Thread Pitch w/14mm Head
New OEM Differential Switch
Works on 2018-Current Maverick X3 with Smart-Lok
2019-Current Defender with Smart-Lok
Old part number 710005761
Current part number 710006040
Brand NEW OEM BRP Genuine Transmission Drive Belt Will fit: Defender, Maverick Trail 1000/1000R Maverick Sport 1000/1000R Will also fit other machines. Must check part numbers to confirm fitment. Current Part Number: 417300551 Replaces 417300383 High performance drive belts calibrated to maximize your machine’s performance. Aramid tensile cords used in construction for extra long life and dependability, also delivers a consistent length. High tensile reinforced fiber elastomer undercords provide minimal dusting and long term flex life. Flexweave overcord for superior adhesion and crack resistance. Consistent performance during life of belt. Quality you can count on for optimum performance
Brand New OEM Starter Relay Will work on Defender, Maverick, and Commander 2014 and Newer Be sure to check this is the correct solenoid for your machine. A quick visual inspection will verify its the correct part.
Brand New Genuine OEM BRP logo sticker 20mm diameter Part number 516006224 replaces 219902677 704904616
Impact-absorbing rubber prevents bottoming-out of winch Prevents hook rattling when not in use A must-have for preventing damage to your winch fairlead Made in the U.S.A. 2 1/2″ Diameter 1 3/4″ Thick Part number 4505-0475
Part Number 715008101
Molded heavy-duty aluminum mirror.
Stays in place on rough trails.
Ball-joint design for steady multi-angle adjustment and outstanding vision.
Use with or without any BRP roof, BRP windshield or BRP doors.
Fits either side.
Sold individually.
Fits Defenders and Maverick Sport/Trails some X3’s Don’t know if it’ll work on your machine? Please ask! Part number 710004492
NEW Chrome Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121, ALUG14BX
New Genuine OEM filter Fits 2020 Heated cab models Made in the USA
Dual USB Power Outlet Kit A simple upgrade kit, plug and play Product Number: 219400510 replaces the existing 12v power outlet on your machine: 710001248
710004814 OEM switch Used on some 2016-19 Maverick Sport Maverick Trail Maverick X3 and Defender
Drive Belt Can Am Fits: 2017-2020 Maverick X3 900HO Turbo R Turbo RR 2017-2020 Maverick Trail/Sport 800R, 1000, 1000R 2016-2020 Defender HD10/HD8
Replaces OEM # 422280651 / 417300383 / 422280654 / 422280652 Gates Part number 48R4289 If you have fitment questions, please ask, we are here to help.
IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT.
FEATURES AND BENEFITS
Designed for the most demanding, turbo-charged off-road CVT applications. With Gates proprietary materials and design, G-Force™ RedLine™ CVT belts handle extreme temperatures with excellent heat recovery, while maximizing load and torque capacity - making it one of the most efficient CVT belts currently on the market.- First on the market to utilize Ethylene Elastomer compound to address the needs of larger SxS and high-horsepower ORVs in tough riding conditions.
- Next-generation EE compound offers maximum transverse stiffness and heat resistance, resulting in higher load capacity, higher peak torque capacity, less “heat fade” and less speed loss.
- Delivers 75% greater dynamic axial stiffness on average, up to 50% lower speed losses and better recovery from temperatures up to +170°C (+338°F) without power loss.
- Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F).
- Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing.
- Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
DON’T BREAK YOUR BELT. BREAK IT IN.
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these steps to ensure the best performance and longest life from your G-Force™ belt.
1. Clean the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. Be sure your breather tubes are free of any belt material (broken belt material gets everywhere)
2. Install and Break It In. Perform two heat cycles (10-15 minutes each) at +27°C (+80°F) at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of +16°C (+60°F) or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
FREE SHIPPING TO THE LOWER 48 STATES New OEM clutch inner cover Will fit on the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R Does not included mounting hardware or o-rings. Comes as bare cover
Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 415129355 replaces 710002312
For use with all BRP turn key type ignition switches. Will not fit RFID type ignitions. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail. Be sure to match up one wire at a time when installing, this helps avoid switching wire orientation as the wires are not color coded. The wires are 6” long so it can be fixed inside the headlight pod Sold each; includes butt connectors and zip ties Part number 2120-0943
One spark plug boot, this is used on many applications 2020 and older, if you are unsure on fitment, please contact us.
Part number 420265248
Replaces 710000041 and 420265240
New Genuine OEM 3.7 Gallon (14L) polypropylene injected storage bin Quick and easy install Water resistant Part number 715003314
New All Balls Racing Engine Air Filter Part number 48-1012 10 inches tall 5 inch diameter Replaces OEM 715900394 Fits 2016-Current Defenders HD5, HD8, and HD10's both 3 and 6 seat machines Fits 2018-Current Maverick Trail 800 and 1000 Fits 2019-Current Maverick Sport 1000
New Genuine OEM Rear Differential Lock Switch Only works on models with turf mode
Works on 2017-2020 Defenders
2018-2020 Maverick Trail
019-2020 Maverick Sport
NEW Can Am OEM Cam Timing Tool For holding the cam in place for timing and tightening camshaft sprocket bolts For easy installation of new timing chains or just setting timing. OEM Number 529036268 replaces 529036231
SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Cam Chain and Guide Set for V Twin 1000 Order QTY 1 (one) per engine. Kit includes: 2 Silent Chains 420297068 2 Pivot Guides 420436017 2 Fixed Guides 420236583 2 Bottom Guides 420236350 ONLY WORKS WITH 1000 V TWINS To install the timing chain kit you will need to remove the PTO Cover, Stator Cover, and cylinder heads. We sell the gaskets and pullers required to do this. Check our other listings for these products
New OEM Engine Case Half Gasket. Fits most G2 Can-Am V-Twin Engines. This is for the longer stroke (75mm) cases. Old Part Number: 420651225 New Part Number: 420651227
New Genuine OEM Fits 2016-2020 Defender and Defender Max Secures items in the dash storage area Not compatible with defrost, heat & ventilation system Sold in pairs
Genuine OEM tail light 2016-2020 Defender HD5 HD8 and HD10 2017-2020 Defender Max HD8 and HD10 Works on either left or right side Part number 710004257
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.