Differential & Gearbox

  • SHIPS FREE TO THE LOWER 48 STATES Late G1 Early G2 Standard Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
  • 1652 NEW OEM Needle bearing 16x22x19 Size These are OEM Canam Bearings high quality brands like NTN are used. 16mm Inner Diameter 22mm Outer Diameter 19mm Long Part number 705502058
  • XPS SAE 75W-90 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box. 1 U.S QT 946ml per bottle This listing is for 2 quarts See your owners manual before ordering to make sure you order the correct weight for your Can Am 779158
  • SHIPS FREE TO THE LOWER 48 STATES New OEM Standard G2 Rear Differential Ring & Pinion Gear Set 1652 There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 2 1/16? (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8? (16mm) Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 -2019  G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential. 570/650 XMR machines do not have the true XMR differential.
  • Can Am Commander 800/1000 rear differential oil seal This is a genuine OEM oil seal 55mm outer diameter 30mm inner diameter Will come as pictured Part Number 705502110 replaces 705501879
  • OEM oring commonly used on distance ring on gearbox input shaft. 420631610 replaces 420631615
  • NEW Speed Sensor Quad Logic brand Will fit 2006-Current Outlander, Renegade, Maverick, Maverick X3, Commander, and Defenders 2210-0568 500-1024 Replaces OE Numbers 420265621, 420265622, 420265624, 420265625, 420265626, 420265629, 707000745 and 711265622 
  • SHIPS FREE TO THE LOWER 48 STATES Brackets for swapping in a Maverick Rear Differential in your Commander. USA Made Black powder coat MIG welded steel brackets.
  • SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Parts OEM 14% LOWER LOW GEAR SET for most every 1000 Vtwins minus north american 2015 and newer outlander 1000/1000R This is the way to reduce the over all Low Gear ratio on your can-am 1000 running larger tires. This is the LOW RATIO for any Large Gearbox. The last picture shows a Large gearbox. This will not fit Small Gearboxes. 14% lower gear ratio than standard 1000 gear boxes (Maverick, Commander, Renegade, Outlander) Will also fit 800 Commander
  • New bearing and seal kit for 2014-19 Commanders 800R 1000 or 1000R These are high quality bearings and seals, brands include: Koyo, SKF and Timken This **WILL NOT** work for 2011-2013 Commanders This **WILL NOT** work for with Commanders Equipped with a LOCKING REAR DIFFERENTIAL. This **WILL NOT** work for 2020 Commanders Fits in differentials part numbers: 705502517 705501804 705502096 705502331
  • 1447 NEW OEM Needle bearing 14x20.65x19 Size These are KOYO Bearings high quality 14mm Inner Diameter 20.65mm Outer Diameter 19mm Long Replaces OEM Part number 705501408
  • MOOSE UTILITY Shifter Cable Part Number 0652-2421 Replaces OEM number 707001210 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 53 inches long from end to end Fits two seat models: 2016-2020 Commander 800R 2016-2020 Commander 1000/1000R 2016-2018 Maverick 1000R
  • Differential Vent Tube 8mm diameter Part number 705501584
  • MOOSE UTILITY Shifter Cable Part Number 0652-2894 Replaces OEM number 707000775 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 53 inches long from end to end Fits two seat models: 2011-15 Commander 800R/1000 2013-15 Maverick 1000R
  • MOOSE UTILITY Shifter Cable Part Number 0652-2422 Replaces OEM number 707001283 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 83 inches long from end to end Fits Four seat MAX models: 2016-2020 Commander MAX 800R 2016-2020 Commander MAX 1000/1000R 2016-2018 Maverick MAX 1000R
  • OUT OF STOCK
    Aftermarket Four wheel drive servo motor. This is what engages the sliding collar putting power to the front differential. Part number 715900614 420891087 415129174
  • New IKO, Koyo or NTN brand needle bearing B98 replaces 705500261 If you are unsure on fitment please reach out to us we will help.
  • NEW OEM 2014-2019 Commander 800R 1000 1000R Rear Differential This **WILL NOT** work for 2011-2013 Commanders This **WILL NOT** work for with Commanders Equipped with a LOCKING REAR DIFFERENTIAL. This **WILL NOT** work for 2020 Commanders 705502517 705501804 705502096 705502331
  • Oring that replaces 705501880 Buna-N 70 Duro (NBR) This is used on 2014-19 Commander rear differential (without unlocking rear) pinion gears
  • Used- Good Condition, slight blemishes OEM Shift Cable Support Part Number: 707000921 Fits 2011-2020 Commander Comes as Pictured  

Title