New take off Unit-51 Removed From Machine With 9.5 Miles. Fits G2 Outlander and G2 Renegade Old part number 705201907 New part number 705203387
Brand New Genuine OEM head light For G2L. This housing is for both the high and low beams on a G2L model. The lens is roughly Five inches across. 710003900 If you have steel racks on a 2015 or newer Can Am ATV you have a G2L. New in package. Comes as pictured. This will not fit G2 or G1 regular Outlanders.
SHIPS FREE TO THE LOWER 48 STATES Fits all 500, 650, 800, 800R, 570, 850, 1000, 1000R and 1000R turbo Mavericks Outlanders, Renegades, and 2020 & Prior Commanders. Replaces OEM part numbers 715000302, 422280360, 715900212, and 422280364. This will not fit: Defenders, Maverick X3 or Maverick Sport/Trail Gates Part number 30R3750 Do not confuse this with the carbon or standard g-force, this is the newly developed for the 2020 season.DON’T BREAK YOUR BELT. BREAK IT IN.FEATURES AND BENEFITS Designed for the most demanding, turbo-charged off-road CVT applications. With Gates proprietary materials and design, G-Force™ RedLine™ CVT belts handle extreme temperatures with excellent heat recovery, while maximizing load and torque capacity ― making it one of the most efficient CVT belts currently on the market.- First on the market to utilize Ethylene Elastomer compound to address the needs of larger SxS and high-horsepower ORVs in tough riding conditions.
- Next-generation EE compound offers maximum transverse stiffness and heat resistance, resulting in higher load capacity, higher peak torque capacity, less “heat fade” and less speed loss.
- Delivers 75% greater dynamic axial stiffness on average, up to 50% lower speed losses and better recovery from temperatures up to +170°C (+338°F) without power loss.
- Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F).
- Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing.
- Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these steps to ensure the best performance and longest life from your G-Force™ belt.
1. Clean the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. Be sure your breather tubes are free of any belt material (broken belt material gets everywhere)
2. Install and Break It In. Perform two heat cycles (10-15 minutes each) at +27°C (+80°F) at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of +16°C (+60°F) or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Drive Belt Can Am Fits: 2017-2020 Maverick X3 900HO Turbo R Turbo RR 2017-2020 Maverick Trail/Sport 800R, 1000, 1000R 2016-2020 Defender HD10/HD8
Replaces OEM # 422280651 / 417300383 / 422280654 / 422280652 Gates Part number 48R4289 If you have fitment questions, please ask, we are here to help.
IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT.
FEATURES AND BENEFITS
Designed for the most demanding, turbo-charged off-road CVT applications. With Gates proprietary materials and design, G-Force™ RedLine™ CVT belts handle extreme temperatures with excellent heat recovery, while maximizing load and torque capacity - making it one of the most efficient CVT belts currently on the market.- First on the market to utilize Ethylene Elastomer compound to address the needs of larger SxS and high-horsepower ORVs in tough riding conditions.
- Next-generation EE compound offers maximum transverse stiffness and heat resistance, resulting in higher load capacity, higher peak torque capacity, less “heat fade” and less speed loss.
- Delivers 75% greater dynamic axial stiffness on average, up to 50% lower speed losses and better recovery from temperatures up to +170°C (+338°F) without power loss.
- Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F).
- Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing.
- Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
DON’T BREAK YOUR BELT. BREAK IT IN.
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these steps to ensure the best performance and longest life from your G-Force™ belt.
1. Clean the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. Be sure your breather tubes are free of any belt material (broken belt material gets everywhere)
2. Install and Break It In. Perform two heat cycles (10-15 minutes each) at +27°C (+80°F) at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of +16°C (+60°F) or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Drive Belt Can Am Fits: 2017-2020 X3 Maverick Turbo R Turbo RR 900HO 2017-2020 Maverick Trail/Sport 800R, 1000, 1000R 2016-2020 Defender HD10/HD8 OEM # 422280651 / 417300383 / 422280654 / 422280652IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT.FITMENT QUESTIONS?? PLEASE ASK!World’s Best Belt Line- Latest generation heavy-duty, high-twist Aramid Fiber cord for HIGH HORSEPOWER TENSILE LOAD requirements. Making it the strongest belt on the market.
- Highest shock load rating to date being able to withstand the power of the 400hp machines.
- Increased top cog pressure load design that increases sidewall rigidity, prevents top cog bowing, but still allows for increased rotational flexibility.
- Bottom cog uses HIGH MODULOUS RUBBER COMPOUND (BZX1) for better heat resistance and heat dissipation.
- Bottom cog is impregnated with short Aramid Fibers for better belt-to-sheave adhesion and reduced overall belt temperature.
- Latest bottom cog design for greater rotational efficiency at full shift.
- Precision ground sidewall angle (SCUFFING) for smooth engagement, increased power transfer and lower operating belt temperature.
- Aramid Fiber cord, versus polyester, wraps over bottom cogs for increased bottom cog strength.
- Increased cord pop-out resistance.
Brand New Genuine OEM Grey Electronic Key. The key will need to be programmed with BUDS software to your ATV or UTV to work. Feel free to contact us about programming These keys can be programmed as performance, normal, or a work key You can program multiple keys to your ATV or UTV Part number 710002183
HD Clutch bolt set for most every Can-am V-twin 2006 to current. Will not work on: Maverick Turbo Maverick X3 Maverick Sport Maverick Trail Defender These will swap out the factory Torque To Yield (TTY) bolts/studs. M10 and M12 Black-Oxide Alloy Steel Socket Head Bolt These are class 12.9 bolts, with a tensile strength of 170,000 psi, these alloy steel bolts are stronger than Grade 8 steel bolts. 8 and 10mm Allen Sockets required to install these bolts. 18-8 Stainless Steel Single-Wave Washers included, these help prevent loosening, use with your existing washers. Installation Torque Specs: 80 ft·lb On the Primary Bolt 45 ft·lb On the Secondary Bolt (red thread locker recommended, allow to set up overnight)
Brand: Can-Am Part Number: 710004567- Required for installation of Heated Hand Grips & Throttle Combo.
- Fits: (G2L) 2015-2016 Can-Am Outlander L 450, 2015 Can-Am Outlander L 500, 2016 Can-Am Outlander L 570, 2015-2016 Can-Am Outlander L Max 450, 2015 Can-Am Outlander L Max 500, 2016 Can-Am Outlander L Max 570, 2017-2020 Can-Am Outlander 450, 2017-2020 Can-Am Outlander 570, 2019-2020 Can-Am Outlander Max 450 6x6
New Genuine OEM IACV idle air control valve bypass, this is what controls the idle speed of your ATV. Will fit on most any Vtwin 2006-current Can Am Outlander Renegade models. Will not fit 850 or 1000R engines with the 54mm throttle body. Old part numbers 420665940 420963055 420963057 Current part number 420665941
New Genuine OEM Intake neck for Outlander 1000, Renegade 1000, Commander 1000 and Maverick 1000 Turbo Old part number 420267040 420267041 Current part number 420267042
KFI Brand Allows you to use a standard 2" truck hitch on your ATV. Fits G2 Outlander/Renegade 100% MADE IN USA Constructed of 3/16" steel Powder coated black for supreme durability Complete installation instructions included No Mounting Hardware required
Please verify your differential uses this style of seals before ordering! Can Am Rear Differential Pinion and Axle Seals (Timken or SKF) Fit on most 2006-2013 Outlanders and Renegades The Pinion Seal has a 70mm Outer Diameter And the standard 37mm inner diameter. The Axle Seal has a 47mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials Replaces OEM Numbers: 705400027 705500751 705501996 705401481
Please verify your differential uses this style of Seals before ordering! Can Am Standard Rear Differential Pinion and Axle Seals (Timken or SKF) Please measure your parts before ordering to verify fitment. The Pinion Seal has a 70mm Outer Diameter and the standard 37mm inner diameter. Replaces part number 705401481 The Axle Seal has a 52mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials common to find in 2016 and newer ATVs or if your differential has been repalced.
NEW Black Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121B, ALUGB14BX
NEW Chrome Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121, ALUG14BX
One CVT cover screw with the Torx head. M6 X 30.5 Stainless Part # 420440561
New OEM Maverick 1000R Primary Clutch Stud Kit
Also fits 1000R ATV’s
Will not fit Turbo Mavericks or Maverick X3/Sport/Trail
Complete brand new OEM kit
Part number 703500842
OEM Number 715900244 Maverick 1000R Commander 1000R Will not fit turbo or ATV applications Center Electrode Projection Projected Center Electrode Type Standard Electrical Resistance 5k Ohms Electrode Tip Material Nickel Alloy Ground Electrode Configuration Single Ground Electrode Shape Standard Heat Range 8 Hex Size Imperial 9/16″ Hex Size Metric 14 mm Spark Gap Imperial 0.035″ Spark Gap Metric 0.9 mm Style LMAR8C-9 Terminal Configuration Solid Terminal Thread Reach Imperial 1-1/32″ Thread Reach Metric 26,5 mm Type Resistor Type Units Each, order two per engine
New NGK Spark Plug
OEM part number 715900357
NGK part number LMAR9D-J
These spark plugs work in 2015-2017 Maverick TURBO machines only (will not work in the X3)
Shell
Thread Size: 10mm
Thread Pitch: 1.0mm
Seat Type: Gasket
Resistor Value: 5K Ohm
Reach: 26.5mm (1.04″)
Hex Size: 9/16″ (14mm)
Terminal Type: Solid
Overall Height: ISO
Gap: .031″ (0.8mm)Center Electrode
Material: Nickel
Type: Standard
Size: 2.5mm
Projection: ProjectedGround Electrode
Material: Nickel
Type: Multi-Ground- OUT OF STOCK
Canam Maverick Outer CVT Cover 1000R Heat Protection Mat. New OEM. Will come as pictured. Current Part number: 715900313. Replaces: 420975053. 
Can-am Maverick Rear differential shim kit. Needed when changing gears in your maverick rear differential. Part Number: 703500839
IKO bearing replaces OEM 703500840
NEW Spanner Wrench This is to remove and install the nut on 703500867 pinion assembly. Use a 20 spline yoke to retain the assembly in a vice and spin the nut off. The nut should be RH threaded
Our Custom USA Made Maverick Swap Kit. Allows you to run the better/stronger OEM Maverick Differential in your Commander. Kit includes: Custom Black Powder coated Brackets All Hardware needed New OEM Maverick differential New OEM Driveshaft with correct yoke and seal protector installed. No welding needed BUT you will need to cut/drill part of your frame to make this fit. Stock axles will work, no stretched arms or lift needed. The maverick differential is considerably more quiet than the stock Commander unit. Maverick differentials have proven to hold up much better, often referred to Can-am’s first real SXS rear differential. The gear ratio is the same as your stock Commander differential. Will not fit in commanders with un locking differentials Maverick Differential Swap Instructions
New Genuine OEM Robust injected-polypropylene construction allows for right fit and easy installation. Adjustable unit safely holds most tablets and smartphones measuring between 5.1″ (13 cm) and 10″ (25.4 cm) (with protective case). Perfectly complements the Wet Sounds audio systems or Rugged Radios Intercom System to play music with your device. Allows the installation of Garmin Montana 680T GPS. Integrated storage (2.5 Gal (9.5 L) capacity) with access to the dash 12V outlet for device charging. Integrated mounting location for RAM mounts. Not compatible with Defrost, heat and ventilation system (715003678). Part number 715005212
New Genuine OEM Convex mirror for wide visibility Ball-joint design with tightening knob for steady multi-angle adjustment Can be used with or without roof or windshield Part number 715004924
SHIPS FREE TO THE LOWER 48 STATES Brackets for swapping in a Maverick Rear Differential in your Commander. USA Made Black powder coat MIG welded steel brackets.
SHIPS FREE TO THE LOWER 48 STATES OEM Can am Shaft cut to length for use with our maverick swap kit in your commander.- OUT OF STOCK
Brand New OEM spring kit Helps Stiffen your suspension Reduces vehicle sag when shocks are under heavy demand Perfect for machines with snow plows Kit part number 715004961 
Full rear mesh screen reduces windshield backdraft for added cabin comfort. Installs quick and easily on roll cage. Large Can-Am branding. Part Number 715003664
New Genuine OEM Fan Current part number 709200665 Works on 2018-Current Maverick Trail 800 and 1000 2019-Current Maverick Sport 1000
New Genuine OEM Fits 2018-2020 Maverick Trail 2019-2020 Maverick Sport
Can Am 2016 2017 Maverick Turbo Brown Fuel Injector Genuine OEM Part Part number: 420274255
Full rear mesh screen reduces windshield backdraft for added cabin comfort. Installs quick and easily on roll cage. Large white Can-Am logo on black mesh. Will not work on XMR models Part number 715006701
New Genuine OEM Fits 2017-2020 Maverick X3 and Maverick X3 Max 2019-2020 Maverick Sport Old part number 707800855 Current part number 715900422- OUT OF STOCK
NEW OEM Can-Am Maverick X3 and X3 MAX Left Sway Bar End Link (Also called LH Ball Joint) Fits Left Front on Can-Am Maverick X3 and X3 MAX’s. Comes as Pictured.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.