SHIPS FREE TO THE LOWER 48 STATES Updated Can-am Rear G2 Outlander/Renegade 2019 and newer prop shaft. All new all OEM Shaft OEM U-joints. OEM protector ring installed Input yoke swapped to 18 spline This is the correct length for short wheel base single seat 500/570/650/800/850 Outlander or Renegade with 1000 XMR rear differential. This will also work on 2015+ Outlander short wheel base, single seat 1000/1000R with 1000 XMR rear differential. Direct replacement for 2015 and newer 800/850 XMR Current Part number: 703500988 Previous Part number: 703500858 703500931 20 spline differential side yoke 18 spline gearbox side yoke No wear ring needed
Can-am Rear G2 2012 and newer prop shaft. All New All OEM Shaft OEM U-joints, with OEM gearbox seal protector installed. Correct shaft for Single Seat (SWB) 2012-14 1000 Outlander or Renegade with 1000 XMR rear differential. WILL NOT WORK ON 2015 Outlander 1000/1000R and newer as these have the smaller gearbox. Direct replacement for 2016-Current Renegade 1000R XMR **Please note, this is the most updated shaft and does not require a wear ring on the differential side of the shaft. The last two pictures illustrate this.** 20 Spline Gearbox side yoke 20 Spline Differential side yoke Current Part number: 703500990 Previous Part number: 703500928 703500901
SHIPS FREE TO THE LOWER 48 STATES New genuine Can-am rear prop shaft for outlander 1000 xmr. (MAX length minus 1.75”) This is an oem part, we do not cut, phase, balance or otherwise modify this shaft. It will work on 2012-14 Outlander 1000 MAX ATV's with the XMR rear differential also. 20 Spline Gearbox Yoke 20 Spline Differential Yoke Current Part number: 703500989 Previous Part number: 703500859, 705501720, 703500927
New 2014-2019 can am commander 800 or 1000 rear driveshaft. This will not fit 2011-2013 Commanders. We install the protector to make it a straight forward install for you! This is the new style yoke that does not require a wear ring. This is an OEM CanAm shaft, do not confuse this with sub grade Chinese products. This has the larger yoke end for the 2014 to 2019 commanders 20 Spline Gearbox 20 Spline Diff Current Part Number: 703500985 Previous Part number: 703500924 703500854 705501803 This **WILL NOT** work for 2011-2013 Commanders as they have a different rear differential. This **WILL NOT** work for with Commanders Equipped with a LOCKING REAR DIFFERENTIAL. This **WILL NOT** work for 2020 Commanders
New OEM Canam Commander 800 or 1000 rear driveshaft. We install the wear sleeve and protector to make it a straight forward install for you! This is an OEM can am shaft, do not confuse this with sub grade Chinese products. If you have a 2011-13 commander 800 or 1000, please understand the 2014-new commander rear propshaft will not fit! They have a different rear differential. We here at CPG understand the newer shafts are much cheaper, we do not know why there is such a price difference. *Will not fit Commanders with Electric Unlocking rear differentials (this is a rare option, you will have a switch on the dash) 20 spline gearbox end yoke 18 spline differential end yoke Roughly 6 1/4? center of weld to center of weld. Current Part Number: 703500805 Previous Part number: 703500762 705501257
- Can-am Rear Driveshaft G2 2019+ G2 Renegade 1000R base, XXC or XMR All New All OEM Shaft OEM U-joints, with OEM gearbox seal protector installed. **Please note, this is the most updated shaft and does not require a wear ring on the differential side of the shaft. The last two pictures illustrate this.** 20 Spline Gearbox side yoke (fits large type gearboxes) 20 Spline Differential side yoke (fits fits 705502808/705502546 rear differential) Current Part number: 703500990 Previous Part number: 703500928 703500901
- Updated Can-am Rear G2 Driveshaft Fits: 2019+ Outlander 1000R (excluding MAX and XMR) 2019+ Outlander 650/850 (excluding MAX) 2019+ Renegade 650/850 All new all OEM Shaft OEM U-joints. OEM protector ring installed Gearbox side yoke swapped to 18 spline Current Part number: 703500988 Previous Part number: 703500858 703500931 If you have a 2019+ 570 short wheel base single rider, this may be the correct shaft for your application, the parts fiche may not show the correct part number. You will need to measure the outer diameter of your rear differential's pinon seal, this shaft will only work with machines that have a 80mm pinion seal. If you measure 70mm you will need 703500986. 20 spline differential side yoke (fits 705502808/705502546 rear differential) 18 spline gearbox side yoke (small gearbox size) No wear ring needed, the deferential side yoke is machined to the outer diameter that a wear ring would be.
2013-2019 driveshaft for Outlander Max machines New Genuine OEM Old Part Numbers 703500863 703500926 Current Part Number 703500987 18 Spline end yokes. Perfect for machines with a small gearbox and a standard rear differential.
Brand New Genuine OEM front differential This is the power steering model which has the quick engagement
Will work on both power steering and non power steering machines
Fits 2012- Current Outlanders and Renegades (minus electronic locking type front differentials)
Also Fits 2011-2020 Commander Commander MAX and 2013-2017 Maverick and Maverick MaxOld part numbers 703500900, 705401241, 705401480, 705401483, 705401485, 705401488, 705401511, and 705402181
Current part number 703500908You will need to transfer over your fill plug
NEW Push to start button Genuine OEM button Will work on 2011-2020 Commander and Commander Max and 2013-2018 Maverick and Maverick Max Part number 710002594
Brand New OEM PTO Cover Gasket for V-Twin Engines Part number 420651211
Can-am OEM tool. High-quality, heat-treated steel for superior strength. A tool needed to pull primary clutches off the crank shaft taper. Part Number: 529035746
Brand New Genuine OEM Friction Washer Goes between Ball Bearing and Spring Seat on the Drive Pulley Clutch
This is needed for correct engine braking on many models, not sure if you need it, please ask!
OEM Part number: 420460430
NEW OEM Canam PPS Sport Mode Switch Part number 710002199 Fits: 2011-2013 Commander 1000 and 800R 2013 Maverick 1000R Amber backlight
NEW OEM Shim Kit for standard pinion gears. Wide Range of shims, this will allow you to set up your pinion depth. 37mm Outer Diameter. 27.45mm Inner Diameter. This is a loose fit Fits Front or Rear Standard Differentials Part number 705502061
NEW OEM Can-am Defender, Maverick Sport/Trail or Maverick X3 front differential pinion seal. This is pressed into the front differential and seals against the front driveshaft. Measurements are : 79mm outside and 25mm inside 8mm thick Part number 705401827
New Can Am Outlander Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2018-2020 Please understand 2017 and older models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710005553
NEW OEM Can Am G3 Outlander Ignition Switch 710008938. You will need to transfer over the locking nut. Fits many 2023+ models. Please contact us if you have questions on fitment.
This is the NEW OEM factory gauge support from the G2L Outlander models 450 and 570
For use with Small LCD display
Part Number: 705007066
Brand new genuine OEM Foot peg kit Will fit 2012-2020 Outlander G2 and G2L machines Made of aluminum Bolt holes are 6 3/4? from center bolt hole to center bolt hole Current part number 715001131- OUT OF STOCK
This is the NEW OEM factory gauge support from the 2020+ Outlander XTP and LTD models. For use with large 7.6" LCD display Part Number: 705013984 
Dash/Speedometer for 2008-2012 Outlander 500 650 and 800 MAX or STD . This is the factory Gauge.
The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information.
It will display 0 miles, please record your current miles for your records.
If you are looking for a dash (715900042) for your 06-07 V twin Outlander, this will retro fit. Click here for the guide on the Analog To Digi Dash Repin
Current part number: 710003100
Replaces part numbers: 710001472 710001527 710001978 710001985 710002178 710002474 710001068
Can-am Commander style Outer CVT cover belt box Please check your cover before ordering, we can help if you do not know what to look for. This is the updated 13 bolt cover with the heat shield. Fits: Commander 800R two seat 2011-2020 Commander 800R MAX four seat 2016 Commander 1000 two seat 2011-2017 Part number 420612472
Can-am Outer CVT Cover, belt box. This is the updated 13 bolt cover. Works with 7 or 13 bolt inner covers. This will fit on any 2006-current v twin ATV, Renegade or Outlander, 500 650 800 or 1000. If you have a a stud with a nut retaining your primary clutch this cover does not have the depth needed. Many 1000R machines use a stud/nut in place of the bolt. Unsure on fitment, please ask! This will keep the water out! 13 Cover bolt holes Current Part number is: 420611397 Replaces: 420611395, 420611390, 420611391, 420611393
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.