SHIPS FREE TO THE LOWER 48 STATES New OEM Standard G2 Rear Differential Ring & Pinion Gear Set 1652 There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 2 1/16? (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8? (16mm) Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 -2019 G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential. 570/650 XMR machines do not have the true XMR differential.
1652 G2 Standard Rear Differential Rebuild Kit Please note, application alone is not accurate enough, please measure your parts before ordering! There are a few options for rebuild kits, please measure your parts before ordering!! OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. Paired with high quality aftermarket ball bearings along with double lip axle seals. If your differential has tapered roller bearings, this will not fit. This kit should be installed by an experienced technician. Shims are included as the gears will need to be set up in your cases. Note: the O rings are not included, this is a cost savings measure as they are generally reusable. This kit will only fit six mounting hole differentials. Measure your outer diameter of the pinion seal, it should measure 2 3/4" (70mm) Measure your outer diameter of your axle seals! They should measure close to 2 1/16″ (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8″ (16mm) Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 and newer G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential. 570/650 XMR machines do not have the true XMR differential.
Can-am Outlander, Renegade or Commander 500 650 800 1000 6 Bolt HD rear Differential.
This is an OEM Canam part used in many Generation 2 atvs.
It does not have the bracket for the rear brake caliper on it.
This is an updated version with much more substantial webbing for improved support.
Fits:
2012 Outlander and Renegade 800, 1000
2013 to 2018 500/570/650/800/1000 Outlander Renegade
2011-2013 Commander 800 1000
2013-2018 XMR 570 and 650**WILL NOT FIT** XMR 1000 or XMR 800
WILL NOT FIT ALL 2019 Models, please contact us if you have a 2019.Current Part Number 703501019
Previous Part Numbers 703500878, 705501896, 705501419, 705501993- OUT OF STOCK
New OEM Differential Pinion Oil Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: Gen 1 Front and Rear Diffs 2012-18 Outlander and Renegade Front and Rear Early Commander Rear All Maverick and Commander Front WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL or 2019 and newer Measurements: 70mm outside diameter and 37mm inside diameter Part number 705401615 
New OEM front differential axle seal
Outer diameter is 47mm
Inner Diameter is 25mm
Part numbers: 705401486 705401618
SHIPS FREE TO THE LOWER 48 STATES Squadron Green wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450 Both are brand new. Part numbers 715006117 & 715001378
NEW OEM BRP Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 715900265 Works with base digital dash, if you are unsure on fitment please contact us we will help.
New OEM can-am input or output seal for small gear boxes You will need two per gearbox. 32mm inner diameter 47mm outer diameter 7mm thick Current Part Number 420950089 Replaces Part Number 420950087
Can Am OEM parts.
Spring and Spring Cup set, two springs and two spring cups.
These are the little parts that go flying across the shop floor when you open up your Can Am factory primary clutch.
These parts are what helps give your machine engine braking.
Part numbers: 420229577 420239134
- OUT OF STOCK
NEW OEM Shock Bushing for base black body hydraulic type shocks. These will fit: 2020 and prior Commanders 800 800R 1000 1000R G1/G2 Outlanders 400 450 500 570 650 800HO 800R 850 1000 1000R Oem part number 715900122 - OUT OF STOCK
Brand New Genuine OEM Shifting cable Fits:2020+ Defender HD8 HD9 HD10 MAX or PRO Roughly 143 inches long Part number 707002725 
Set of 13 CVT clutch cover bolts with the hex heads and torx inside.
The preferred style to work with.
Genuine OEM Parts
A little anit-seize is a great idea when installing these bolts, as the inserts they screw into easily can strip out.
Part Number 420440568
Brand new outer secondary clutch
This is found on many BRP ATVs. Please ask if you have fitment questions.
New OEM Part Part Numbers : 420280173 420280176 420280178
Brand new inner secondary clutch This inner clutch has the hole for the pig tale style spring but will work on springs without the pig tale. New OEM Part Part Numbers : 420280499 420280235 420248233 420280236 420280238 420280497
New OEM Secondary Clutch Outer Bearing
Current Part Number 420932421
Replaces 420932426 and 711932426
52mm Outer Diameter
25mm Inner Diameter
15mm Thick
NEW OEM Can-am Secondary Clutch Bolt M10X110 Hex head used with many canam secondary clutches, fitment questions please ask. Part number 420441485
New seat latch for 2012+ Renegade 500 570 800R 850 1000 1000R. Gen 2 Style. Will not work on Outlander seats. Will not work on G1 Renegade seats. Part number 708000914
NEW OEM Shim Kit for standard ring gears. Wide Range of shims, this will allow you to set up your pinion depth. 44mm Outer Diameter. 36mm Inner Diameter. This is a loose fit Fits Front Standard Differentials Part number 705502060
New Can Am OEM Axle Rear Right (throttle side) Fits: 2006-2018 ATV Outlander/Renegade 500 570 650 800HO 800R 850 1000 1000R 2019-2023 Outlander 450/570 Part number 705501486 Replaces 705500868 705500983 705501484 705502473 Premium quality design ideal for off-road, heavy-duty and low speed torque usage. Includes CVs, Shaft and Boots with the best suited geometry for your Can-Am vehicle.
NEW GENUINE OEM part Part number 705600678 Includes: 715500333 715500383 705600080 715500336 715500337 This is the passenger side front caliper right hand side Fits two seat models: 2011 Commander 800 2012-2020 Commander 800R 2011-2017 Commander 1000 2013-2015 Maverick 1000R STD XRS XXC 2016-2018 Maverick 1000R STD DPS XC XXC WILL NOT FIT TURBO, XMR, OR MAX MODELS
NEW OEM Speedometer trim found on Renegade XMR models. Part number 705015189
New OEM Can Am Outlander and Renegade 500 570 and 650 Helix/Cam. Common Upgrade for 800’s with over-sized tires. Current Part Number 420280199 Old Part Number 420280194
New OEM Rear driveshaft U-Joint 25mm caps 398 style Fits all V-twin Can Am rear driveshafts Clips are included just as pictured We recommend pumping fresh grease in after installing, as the grease inside may not be enough for operation.
SHIPS FREE TO THE LOWER 48 STATES Updated Can-am Rear G2 Outlander MAX 2019 and newer prop shaft. All new OEM Shaft OEM U-joints. OEM protector ring installed This is the correct length for long wheel base Outlander MAX machines 500/570/650/800/850 with 1000 XMR rear differential. This will also work on 2015+ Outlander long wheel base, MAX 1000/1000R with 1000 XMR rear differential. Direct replacement for 2019 and newer Outlander MAX 570/850/1000R Current Part number: 703501017 20 spline differential side yoke 18 spline gearbox side yoke No wear ring needed
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.