Shop

  • These dashes are found on many machines.

    2014-2017 Maverick, Commander, Renegade and Outlander models with the Standard Digital Dash Mount This is the factory Gauge/Screen.

    The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information.

    It will display 0 miles, please record your current miles for your records.

    Current part number:  710005087

    Replaces part numbers: 710003851 710003924 710005024 710005208

  • NEW Prop Shaft Low profile pair of clamps for 715900118 boot. Clamps also work for G2 front shaft boot 705401093. The last few pictures show the clamps loose, then installed nice and tight. Sold in pairs enough to do one boot.
  • OEM genuine Can-am Steering Wheel Tilt Adjustment Cylinder

    Will work on all Commanders Mavericks and Defenders

    Part number 709402506 replaces 709400656 709402419

  • New OEM Can-am Part This boot fits the G2 outlander/renegade front driveshaft. It is the thicker tapered boot, some use two of these on G2 atv's front driveshaft. Part number 705401093
  • OEM Can-am Low Beam Headlight Does not include any mounting brackets or hardware, what is pictured is what is shipped to you. Fits: Renegade,  Commander and Maverick (non X3/Sport/Trail) Will not fit on Outlanders. Outlanders use reflector style headlights on the low beams. Part Number: 710002524
  • Can Am Outlander Renegade Front U Joint These are found on the front prop shaft of G1 ATV’s and front drive shaft of Commander and Maverick (non X3/Sport/Trail) Also used on the 400 rear drive shaft 22mm caps. This is a new OEM part Replaces Part numbers:  703000023 703500814 703500607 703500135 703500002 703000024 715900183 715900325
  • Please verify your differential uses this style of Seals before ordering! Can Am Front Differential Pinion and Axle Seals (Timken) Fit on most all 2006-2019 Outlanders and Renegades Also fits Commanders and Mavericks (non X3/Sport/Trail) The Pinion Seal has a 70mm Outer Diameter And the standard 37mm inner diameter. Replaces part numbers 705401481 705500255 705500081 The Axle Seal has a 47mm Outer Diameter And the standard 25mm inner diameter. Replaces part numbers 705401618 705401486 Complete Seal kit for Standard Front Differentials
  • New G2 dual piston Right Rear  brake caliper with OEM pads. Fits G2 Renegade and Outlander 2012-current Genuine OEM part. Part number 703500969
  • New Genuine OEM CVT Cover Drain Plug This clamps on to your outer cvt cover. Part number 707001179
  • NEW Genuine OEM Coolant Temperature Sensor This screws into the cylinder head Part Number 278002895
  • Used ECM (computer) with OEM Digital Key.

    This pair is tested, cleared of any codes and run on our shop ATV before leaving.

    Your Dash (speedometer) may need to be paired with BUDS. If you want to start and run the machine simply unplug the dash before installing the ecu. We provide the pairing service free of charge with purchase of ECU or Dash, contact us for further details.

    Only fits Generation 1 bikes Outlander and Renegade 800 HO 2006 2007 2008

    Part Number: 420266374 420266623 710000817

  • Used 800 R ECM (computer) with OEM Digital Key.

    This pair is tested, cleared of any codes and run on our shop ATV before leaving.

    Your Dash (speedometer) may need to be paired with BUDS. If you want to start and run the machine simply unplug the dash before installing the ecu. We provide the pairing service free of charge with purchase of ECU or Dash, contact us for further details.

    Only fits Generation 1 ATV’s Outlander 800R 2009 2010 2011 2012 MAX and Renegade 800R 2009 2010 2011

    Part Number: 420266733 42026673, 420266738, 710000817

  • Used ECM (computer) with OEM Digital Key. This pair is tested, cleared of any codes and run on our shop ATV before leaving. Your Dash (speedometer) may need to be paired with BUDS. If you want to start and run the machine simply unplug the dash before installing the ecu. We provide the pairing service free of charge with purchase of ECU or Dash, contact us for further details. Only fits Generation 1 bikes Outlander and Renegade 500 2007 2008 2009 please note 2010 models use a different style ECU, this will not work on 2010 and newer Part Number: 420266491 420266495  710000817

  • Used ECM (computer) with OEM Digital Key.

    This pair is tested, cleared of any codes and run on our shop ATV before leaving. Your Dash (speedometer) may need to be paired with BUDS. If you want to start and run the machine simply unplug the dash before installing the ecu. We provide the pairing service free of charge with purchase of ECU or Dash, contact us for further details.

    Only fits Generation 1 ATV Outlander 650 2006 2007 2008 2009

    please note 2010 models use a different style ECU, this will not work on 2010 and newer

    Part Number: 420266501 420266505 710000817

  • Right Side Front or Rear for G2 ATV 2012 with dual piston calipers 2013-19 To current G2/G2L One Caliper Set Part number: DP516 1721-1449 Replaces OEM # 715900249 705601014 DP Brakes Brake Pads are designed with sintered metal compounds to give your ATV high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
  • Left Side Front or Rear for G2 ATV 2012 with dual piston calipers 2013-19 To current G2/G2L One Caliper Set Part number: DP515 1721-1448 Replaces OEM # 715900248 705601015 DP Brakes Brake Pads are designed with sintered metal compounds to give your ATV high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads
  • Replaces OEM 703500836 Japan Made Uncaged Needle Bearing 20X27X15mm Needle Bearing for XMR rear differential pinion gear
  • OEM Rotax Piston Ring Set for 400, 800, and 1000cc engines 91mm bore size Complete kit for one factory piston Part Numbers: 420296774 420685244
  • SHIPS FREE TO THE LOWER 48 STATES Complete Engine Gasket Kit With Oil Seals Fits 500 and 650 Outlanders and 500 Renegades We have used these in many engines with great success. Part number 0934-3018 Replaces OEM 420684145, 420684141
  • OEM Canam Insert, this holds cab interior panels together in your maverick or commander. Part Numbers: 707900133 503189273
  • OUT OF STOCK
    SHIPS FREE TO THE LOWER 48 STATES New Forged OEM Can-am piston kit with rings. Matched to an OEM Rotax used  Cylinder. This is ready to install on your 650 Outlander engine. Two are required per engine. Piston comes with rings installed. Piston pin, and clips are not included. Part number 420684111 420613888
  • OEM Can Am washer for plastic insert 707900133 This is ONLY for the washer Insert is NOT included (only pictured for reference) Part Number: 503189273
  • OEM Canam Insert, this holds cab interior panels together in your maverick or commander.

    Part Number: 707900133

  • Gearbox Shift Shaft Seal 28mm OD 12mm ID 7mm Thick Part numbers: 711250450 420250450