UNI Foam air filter You will need to oil this filter before use. Fits SXS pictured: Commanders 800/1000 and Maverick 1000R (non turbo) (non X3/Sport/Trail) Unsurpassed in airflow, stopping dirt and overall performance Two-stage air filters come apart for maximum airflow and ultimate cleaning Most filters feature the Ultra Seal grease groove on the sealing surface Each fits in stock air box exactly like OEM filter Clean easily with grease-cutting dish washing detergent; just clean, oil and reuse indefinitely Flexible seams that will not crack Filters are designed to fit all stock air boxes Made in the U.S.A. Replaces OEM 707800327
New oem head gasket fits 570 machines, order two per engine Part number: 420630852
New Genuine OEM Mounting kit sold separately Part number 715003814
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 12.1 compression ratio This is a ready to bolt on kit Fits: 2013+ Maverick, Maverick Sport and Commander 1000R Please note this kit will not fit the ATV 1000R or any 1000 engine due to the compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420623566 420623568 420686094 420685244 420296774 420630195 420216352 420216351 420630210
NEW OEM PART Fits 2011 and newer Commander front upper a arm Order two per machine OEM numbers: 706202445
NEW OEM Can-am Defender, Maverick Sport/Trail or Maverick X3 front differential pinion seal. This is pressed into the front differential and seals against the front driveshaft. Measurements are : 79mm outside and 25mm inside 8mm thick Part number 705401827
Brand New Genuine OEM Shifting cable Fits: Two passenger 2018+ Maverick Trail Sport 800 1000 1000R and 2021+ Commander 1000R WILL NOT FIT Four Seat Models or early Commander/Maverick OEM part number 707002000
MOOSE UTILITY Shifter Cable Part Number 0652-2421 Replaces OEM number 707001210 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 53 inches long from end to end Fits two seat models: 2016-2020 Commander 800R 2016-2020 Commander 1000/1000R 2016-2018 Maverick 1000R
Set of four Moose gas shock kit for G1 Outlander 650/800 or Renegade 500/800 These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine. *Please note these will not work in place of struts found on the Outlander 400/500 machines. Features: Moose gas shocks offer long term consistent performance over stock oil only damped shocks 10% stiffer springs provide a better ride and higher load capacity Works great on the front to better support your snowplow and on the rear when hauling cargo Smooth black color blends perfectly on your machine Direct bolt-on replacement: pre-installed spring allows for quicker setup P/N13102146X4
Brand New Genuine OEM CVT Drive Belt for Outlander 400’s Will fit on Traxters and Outlander L 450 Current part number 422280280 Replaces 715900024 Made in USA Will come as pictured
Used ECM (computer) with OEM Digital Key.
This pair is tested, cleared of any codes and run on our shop ATV before leaving. Your Dash (speedometer) may need to be paired with BUDS. If you want to start and run the machine simply unplug the dash before installing the ecu. We provide the pairing service free of charge with purchase of ECU or Dash, contact us for further details.
Only fits Generation 1 ATV Outlander 650 2006 2007 2008 2009
please note 2010 models use a different style ECU, this will not work on 2010 and newer
Part Number: 420266501 420266505 710000817
NEW aftermarket cooling fan for G1 ATV’s Bolt on plug in and go, this is a nice alternative to the OEM Replaces OEM 709200124 709200371 709200313 709200229
All Balls Racing Fuel Pump Assembly Sending Unit Part number 47-1026 Fits: 2013-18 Maverick 1000R 2020 and prior Commander 800 1000 1000R Replaces OEM part numbers 709000270 709000362 709000759
Kit includes one universal boot, one reusable cone tool, two stainless steel clamps, grease pack, and silicone cone lube and instructions Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement Lithium based molybdenum grease ensures good lubrication for long CV joint life XL version of the original EZ Trail boot designed to fit UTVs and large ATVs Material is expandable yet tough enough to be a permanent fix Two clamping diameters ensure a good fit on most vehicles Boot material stays flexible in extreme cold temperatures- Sale!OUT OF STOCK
Brand New Klotz Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. For Can-am off road vehicles with 500cc or larger Vtwin Rotax engines. Excludes Traxter and Quest. Not compatible with Maverick X3 Includes 3 quarts synthetic oil 10W50, 0-ring , Highflow HF152 oil filter, and copper washer for both old style and new style drain plugs. 10w50 oil, great for hot climates, temperature range -13*F to 122*F Will not ship in original box 
NEW OEM BRP Drive Belt. Part number 422280225 This fits the big single cylinder models 2022+ Outlander 700 Outlander HD7 Pro Commander 700 Maverick Trail 700 Defender HD7 Traxter HD7 FITMENT QUESTIONS?? PLEASE ASK! Comes as pictured
NEW OEM Can Am Tool M8x1.25 Tapered Bolt Part number 529036098. This tool fills a few roles, used to open the secondary clutch on many models. This will also lock the crankshaft on Vtwin's and three cylinder models. If you are unsure on application please reach out to us, we are here to help!
Ultra-convenient “all-in-one” oil change kit saves time and money.
Includes XPS Synthetic Blend Oil, oil filter, o-rings and washer.
900 ACE engines found in the Maverick X3 line
SAE 5W-40 4T Oil
Complete oil change kit
Part number 779260
Will not fit Vtwin applications
OEM CVT intake breather P/N 707000777 Will work on 2006 to 2011 can-am v-twins(500,650,800) and 2012 500/650 800MAX Please understand 2012 800 Outlanders are G2 and 2012 Outlander Max 800 are G1 If you are unsure on fitment, please ask us!
G1 2006-2007 atv’s with non reservoir shocks. Your shock body should measure 1.5 inches 25% stiffer over stock springs, great alternative to lift pucks. Rears will retain the factory short spring Will not fit 400/500 struts. WE322010 WE322000
Can Am OEM non power steering stem for G1 Outlander and Renegade 500 650 800HO 800R 2006-2012 Will only work with non power steering bikes Brand New OEM Part number 709400971
New Genuine OEM rear cargo box gas shock Fits 2014-2020 Commander and Commander Max Part Number 708301136
New Genuine OEM 4 Gallon polypropylene injected storage bin Great for storing ropes, tow straps, and winch accessories Easy install (takes just a few minutes) Part number 715003399
DEI (Design Engineering, INC) heat shield kit that reduces temperatures as well as blocking radiant heat in the cup holder and drivers leg area. The mid-engine mounted Commander is prone to heat build up in the cockpit, This is especially true during slow running condition or when a roof and windshield are installed. This 13 piece heat shield kit will reflect and insulate excessive heat entering the cockpit. Installation is straight forward and these adhesive backed durable shields will increase the riding comfort for you and your passenger Blocks heat build up in the cockpit area. Adhesive backed & precision cut Premium heat reflective and insulation shielding Temperature Rating: 1000 F Made in the USA Mfg Part# 902490 010878 607078108784 Product Instructions
1447 NEW OEM Needle bearing 14x20.65x19 Size These are KOYO Bearings high quality 14mm Inner Diameter 20.65mm Outer Diameter 19mm Long Replaces OEM Part number 705501408- OUT OF STOCK
NEW OEM G2S Snorkel Kit for 2021+ G2 Renegade with larger display, if you have fitment questions please send us a picture of your speedometer and we will help.
Part number 715007083
All hardware is included, instructions are online. We can email them if you have trouble finding them. Please note you will need to trim some parts on your machine, to install this kit. This is outlined in the instructions very clearly. This kit raises the engine intake, CVT intake and CVT exhaust. This is a must for an extreme mud rider.
New Air filter made by All Balls Racing. This is an OEM replacement filter for early G1 500 650 800HO Outlander or Renegade Please note this will not fit the 800R ATVs Replaces OEM 707800174
NEW extra firm G1 outlander 500 650 800 800R seat foam. Use with seat part numbers 715500323 708000756 708000507 708000402 708001649 This is just the foam, no cover or pan.
New OEM Ball Joint for 2006-2012 Gen 1 Can-Am Outlanders 706200444 This is the bolt in style. DOES NOT come with bolts.
NEW OEM Wheel Center Cap Set of Four Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
New Oem Canam Pinion nut, this is spun on to the pinion gear to retain the bearings on the pinion gear of xmr differentials on ATV XMR's G2 800/850/1000/1000R This is not needed on 570 or 650 XMR models The threads are M28x1.25 Right Hand the outer diameter is 51mm Please check that this is the correct nut for your application Part number 705501550
New OEM bushing Will work on upper and lower a arm Part Number: 706201659 Will come as pictured
NEW SEIZMIK STRIKE Side mirror set Both drivers and passengers side mirrors Pro Fit mounts for the goofy looking D shaped with a channel roll cage will not fit round cages We test fitted these on our defender with the OEM flip glass windshield, there is enough room for the bracket to mount and the windshield to seal as it should. Features: Adaptive 360 Bracket Rotation: Will accommodate any angle roll cage pillar & provide optimal viewing position, so you can mount it high or low and adjust to perfect position every time Full Breakaway Geometry: Designed to break away during impacts to prevent damage Convex mirrors more than double your field of rear view High-Impact ABS Plastic Housing: Resists damage Ball Socket Joint: Provides a broad range of viewing angles Heavy-Duty Steel Mounting Clamp: Low mass design provides maximum strength and durability Convex Mirror Surface: provides wider viewing ranger and image stabilization Shatter Resistant Safety Glass Position Tension Adjustment Bolt: Always be able to keep it tight as new UNLIMITED LIFETIME WARRANTY CANAM Cage Styles Defender: Pro Fit Cage Maverick Trail/Sport: Pro Fit Cage OG Maverick/Commander: Round 2.0” Part number 18093
NEW All Balls Racing outer tie rod kit part number 51-1048 Fits 2012 Commander 800R 1000 Replaces OEM 709400982
SHIPS FREE TO THE LOWER 48 STATES Updated Can-am Rear G2 Outlander MAX 2019 and newer prop shaft. All new OEM Shaft OEM U-joints. OEM protector ring installed This is the correct length for long wheel base Outlander MAX machines 500/570/650/800/850 with 1000 XMR rear differential. This will also work on 2015+ Outlander long wheel base, MAX 1000/1000R with 1000 XMR rear differential. Direct replacement for 2019 and newer Outlander MAX 570/850/1000R Current Part number: 703501017 20 spline differential side yoke 18 spline gearbox side yoke No wear ring needed- OUT OF STOCK
Brand New Genuine OEM MAX Shifting cable Fits: four passenger Maverick Sport MAX 1000R and 2021+ Commander 1000R MAX WILL NOT FIT Two Seat Models or early commander MAX OEM part number 707002270
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.