Can-am OEM tool. High-quality, heat-treated steel for superior strength. A tool needed to pull primary clutches off the crank shaft taper. Part Number: 529035746
-
Can-am OEM PTO and crankcase bearing install and removal tools. These are the OEM tools required to install bearings in the bottom end of your Can-am V twin engine correctly. Part Numbers 529035917 & 529036032 -
Dash/Speedometer for G2 500/650/800/1000 bikes. This is the factory Gauge/Screen. for 2012 2013 G2 models. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part Number 710003103 Replaces Part Number 710002696 Will NOT fit 2013 Outlander 650 XMR -
New Can Am Maverick Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2007-2013 Please understand 2014 and newer models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710003288 Previous part numbers: 710001024 710001351 710001526 710001987 710002294 710002535 -
OUT OF STOCK
Can-Am 13-Bolt ATV CVT Cover Set This cover set fits all g1 and g2 V-twin ATVs, including Renegade and Outlander models with 500, 650, 800,850 or 1000 engines. Note: This cover will not fit 1000R applications with primary clutches that have studs. This is a popular upgrade kit to help keep water out of the CVT. We recommend applying a light coat of thread lubricant to the cover screws to prevent the inserts from spinning. Kit includes: XMR clutch covers (inner and outer) Center rubber gasket Drain plug with clamp PTO O-ring Hardware to attach the inner cover to the gearbox/engine Gearbox O-ring 13 cover screws (hex head style) Part Numbers: 420611397, 420611390, 420611391, 420611393, 420611407, 420440568 -
NEW Genuine OEM Can-am Rear Prop Shaft for 2012-14 Outlander 1000 NON XMR NON MAX Or 2012-18 Renegade 1000/1000R. NON XMR Comes with protector ring installed. Wear ring is not needed or included on this shaft. The yoke is simply machined larger in outer diameter. If you have any doubts about fitment, please count your splines on your gearbox output shaft and the pinion shaft on your differential. This shaft is for 20 spline gearbox output shaft and 18 spline rear differential. Current Part number: 703500991 Replaces Part Numbers: 703500929 703500862 705501413 705501258
-
Can-am Side by Side (Commander 800 and 1000 and Maverick 1000R) 2011-2017 Upgrade dash set: Dash, Bracket, cover and hardware. All OEM, 0 Miles. Your engine hours will stay with the ECU, be sure to record your miles for your own records. The dash comes in km/h and will require BUDS programming to change it to mph. This can be done at your local dealer or we offer this free of charge with purchase if you would like to stop by or you can send us your ecu, dash, key and if you have power steering we would need the power steering module as well. Updated Speedometer Part Number 710004547 Cluster Support Part Number 707900013 Dash Part Number 707900124 The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. -
SHIPS FREE TO THE LOWER 48 STATES Dash swap kit for G2 2012-17 Can-Am ATV’s. WILL NOT FUNCTION 100% on the L models 400/450/500/570 Please note some 2012-13 models may show "dps overheat" This is the factory gauge from the XT-P models. Dual Analog Style read outs. This has the built in coolant temperature gauge, a must for riding in extreme conditions! Brand new dash with 0 miles the Engine hours stay with the ecu, be sure to record your miles for your own records. Dash is set from the factory in KM/H and will require BUDS programming to change it to MPH This can be done at your local dealer or we offer this free of charge with purchase if you would like to stop by or you can send us your ecu, dash, key and DPS (power steering) if factory equipped. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Part Number: 710005075 705006322 -
NEW Genuine Can-am Rear Prop Shaft for 2012-18 Outlander Or Renegade 500, 570L, 570, 650, 800R or 850.
Be sure to check part numbers before ordering if you have a 1000.
This will work on 2015+ Outlander 1000 non XMR/T3 machines (small gearbox).This updated shaft does not need wear ring as it is simply machined larger in outer diameter.
Current Part number: 703500986
Previous Part numbers: 703500925 703500855 70550140618 spline gearbox side yoke
18 spline differential side yoke -
NEW Genuine Can-am Rear Prop Shaft for G1 STD single seat machines WILL NOT FIT MAX.
This will work with 2006-2011 500 650 800 800R, Outlander or Renegade and 2012 Outlander 500 650 or Renegade 500. The picture is what you will get.
We install the wear ring and deflector ring for fast install.
Current Part number: 703500801
Previous numbers: 703500767 703500719 705500816 703500704
-
New OEM Canam Commander 800 or 1000 rear driveshaft. We install the wear sleeve and protector to make it a straight forward install for you! This is an OEM can am shaft, do not confuse this with sub grade Chinese products. If you have a 2011-13 commander 800 or 1000, please understand the 2014-new commander rear propshaft will not fit! They have a different rear differential. We here at CPG understand the newer shafts are much cheaper, we do not know why there is such a price difference. *Will not fit Commanders with Electric Unlocking rear differentials (this is a rare option, you will have a switch on the dash) 20 spline gearbox end yoke 18 spline differential end yoke Roughly 6 1/4? center of weld to center of weld. Current Part Number: 703500805 Previous Part number: 703500762 705501257
-
SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Parts OEM 14% LOWER LOW GEAR SET for most every 1000 Vtwins minus north american 2015 and newer outlander 1000/1000R This is the way to reduce the over all Low Gear ratio on your can-am 1000 running larger tires. This is the LOW RATIO for any Large Gearbox. The last picture shows a Large gearbox. This will not fit Small Gearboxes. 14% lower gear ratio than standard 1000 gear boxes (Maverick, Commander, Renegade, Outlander) Will also fit 800 Commander
