NEW Take Off G2 Can Am Outlander 570 Fuel Pump Assembly Part Number 709000461 From Machine With 9.5 Miles.
Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Current part number 703500943 Replaces part numbers: 708001085 708001102 708001318
New G2 dual piston Left Right Brake caliper with OEM pads. Fits G2 Renegade and Outlander 2012-current Genuine OEM part. Part number 705600860
NEW Genuine Can-am Rear Prop Shaft for 2012-18 Outlander Or Renegade 500, 570L, 570, 650, 800R or 850.
Be sure to check part numbers before ordering if you have a 1000.
This will work on 2015+ Outlander 1000 non XMR/T3 machines (small gearbox).This updated shaft does not need wear ring as it is simply machined larger in outer diameter.
Current Part number: 703500986
Previous Part numbers: 703500925 703500855 70550140618 spline gearbox side yoke
18 spline differential side yoke
Updated Can-am Rear G2 Driveshaft Fits: 2019+ Outlander 1000R (excluding MAX and XMR) 2019+ Outlander 650/850 (excluding MAX) 2019+ Renegade 650/850 All new all OEM Shaft OEM U-joints. OEM protector ring installed Gearbox side yoke swapped to 18 spline Current Part number: 703500988 Previous Part number: 703500858 703500931 If you have a 2019+ 570 short wheel base single rider, this may be the correct shaft for your application, the parts fiche may not show the correct part number. You will need to measure the outer diameter of your rear differential's pinon seal, this shaft will only work with machines that have a 80mm pinion seal. If you measure 70mm you will need 703500986. 20 spline differential side yoke (fits 705502808/705502546 rear differential) 18 spline gearbox side yoke (small gearbox size) No wear ring needed, the deferential side yoke is machined to the outer diameter that a wear ring would be.- SHIPS FREE TO THE LOWER 48 STATES Updated Can-am Rear G2 Outlander/Renegade 2019 and newer prop shaft. All new all OEM Shaft OEM U-joints. OEM protector ring installed Input yoke swapped to 18 spline This is the correct length for short wheel base single seat 500/570/650/800/850 Outlander or Renegade with 1000 XMR rear differential. This will also work on 2015+ Outlander short wheel base, single seat 1000/1000R with 1000 XMR rear differential. Direct replacement for 2015 and newer 800/850 XMR Current Part number: 703500988 Previous Part number: 703500858 703500931 20 spline differential side yoke 18 spline gearbox side yoke No wear ring needed
New Genuine OEM Made of aluminum Large ports for clearing of snow and mud Aggressive design for improved traction Will not work with body side protectors Sold in pairs All hardware is included Click here for instructions
SHIPS FREE TO THE LOWER 48 STATES OEM BRP Heated Grips and Thumb kit.- LED dimmer facilitates reading temperature settings. 4 temperature settings with individual controls for thumb and grips. Returns to previous heat setting. One-touch shutdown. Compatible with Intelligent Throttle Control (ITC). Wiring Cable (710004567) is required for installation on G2 650 and G2L 570.
Brand New OEM heavy duty spring kit. Stiffens suspension for reduced sag on heavy loads. Not compatible with Defender HD5, XT CAB, Mossy Oak Edition and X mr models, and Defender MAX. Complete set two fronts and two rears.- OUT OF STOCK
New Genuine OEM fan 2016-2020 Defender HD5, Hd8, and HD10 2017-2020 Defender Max HD8 and HD10 Part Number 709200534
SHIPS FREE TO THE LOWER 48 STATES Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Part number 703500945 Replaces 708001316
Canam Outer CVT Cover Commander/Maverick 1000R Please look at pictures to verify fitment. This has two breather holes, one in front of the primary, one on the secondary. This cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather. Fits: Commander 1000R two seat 2018-2020 Commander 1000R MAX four seat 2018 Maverick 1000R two seat 2014-2018 Maverick 1000R MAX four seat 2014-2018 Will not fit: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR If you have questions please ask! Current Part number 420212286 replaces 420612319 420612470
All Balls Racing Fuel Pump Assembly Sending Unit Part number 47-1026 Fits: 2013-18 Maverick 1000R 2020 and prior Commander 800 1000 1000R Replaces OEM part numbers 709000270 709000362 709000759
Brand new inner secondary clutch This inner clutch has the hole for the pig tale style spring but will work on springs without the pig tale. New OEM Part Part Numbers : 420280499 420280235 420248233 420280236 420280238 420280497
Genuine OEM Radiator
2016-2020 Defenders HD5, HD8, and HD10
2017-2020 Defender Max HD8 and HD10
Part number 709200951 replaces 709200533
All Balls complete fuel pump module, retaining nut and gasket This fits G1 Models: 2009-2015 EFI Outlander 400 2009-2012 Outlander or Renegade 500 2009-2012 Outlander 650 2009-2011 Outlander 800R 2012 Outlander 800R XMR 2012 Outlander 800R MAX 2009-2011 Renegade 800R Part number: 47-1049 24-71022 Replaces OEM numbers: 703500766 703500781 709000194 709000245- OUT OF STOCK
SHIPS FREE TO THE LOWER 48 STATES New Forged OEM Can-am piston kit with rings. Matched to an OEM Rotax used Cylinder. This is ready to install on your 650 Outlander engine. Two are required per engine. Piston comes with rings installed. Piston pin, and clips are not included. Part number 420684111 420613888 
BRP part number 715005159 Kit includes 4 springs.
Fits: 2019+ 650 or larger Outlanders with base black bodied shocks.
Heavy-duty springs provide enhanced stiffness.
Perfect for snow clearing and hauling heavy loads.
Improves handling.
Standard on Outlander PRO and Mossy Oak models.
NEW GENUINE OEM part Part number 705600678 Includes: 715500333 715500383 705600080 715500336 715500337 This is the passenger side front caliper right hand side Fits two seat models: 2011 Commander 800 2012-2020 Commander 800R 2011-2017 Commander 1000 2013-2015 Maverick 1000R STD XRS XXC 2016-2018 Maverick 1000R STD DPS XC XXC WILL NOT FIT TURBO, XMR, OR MAX MODELS
NEW GENUINE OEM part Part number 705600679 Includes: 715500333 715500383 705600080 715500335 715500337 This is the drivers side front caliper left hand side Fits two seat models: 2011 Commander 800 2012-2020 Commander 800R 2011-2017 Commander 1000 2013-2015 Maverick 1000R STD XRS XXC 2016-2018 Maverick 1000R STD DPS XC XXC WILL NOT FIT TURBO, XMR, OR MAX MODELS
5280 Rear Differential Tapered Roller Bearings and Seal kit 1 Pinion Seal, 80mm outer diameter 2 Axle Seals, 52mm outer diameter 1 Thick Tapered Roller Bearing 3 Thin Tapered Roller Bearing 1 Needle Bearing These are High Quality aftermarket parts, as good or better than OEM! Brands include FAG, NTN, IKO, TIMKEN, KOYO, SKF, Dichtomatik. BRP does not sell these bearings alone, we have taken the guess work out of replacing these parts. Fits: 2019 to Current 650 and Larger ATVs 2013 to Current Outlander 1000/1000R XMR 2015 to Current Outlander 800/850 XMR 2016 to Current Renegade 1000R XMR some 2019 to Current 570 XMR (measure your parts to verify fitment) *** THIS WILL NOT WORK IN 2013-2018 650/570 XMR or 2011/2012 800 XMR machines. If you are unsure about fitment, please contact us! *** Fits differential part numbers: 705502808, 705502546, 705502178, 705502090- OUT OF STOCK
NEW KFI Products Tiger Tail Tow System With 2 Inch Universal Receiver. Tow Rope Part Number 101120 And Receiver Part Number 101110. ATV and UTV retractable tow rope with a retractable design allowing for quick, easy, clean use for towing or as an anchor-line during poor underfoot winch operations Superior to a tow strap and wicked fast deployment 12' of 12,000 lb average breaking strength rope with wear resistant coating Self locking hook storage 3/16” grade 50 steel construction Fully sealed and lubricated mechanism tested to 14,000+ cycles Shot blasted and powder coated black for supreme durability Convenient operation and easy to use Quality built and dependable performance Rugged design for the toughest environments – no electrical parts to burn up Constant tension Keeps your gear clean – no more dirty tow straps to carry 100% serviceable components Made in USA 
DEI (Design Engineering, INC) heat shield kit that reduces temperatures as well as blocking radiant heat in the cup holder and drivers leg area. The mid-engine mounted Commander is prone to heat build up in the cockpit, This is especially true during slow running condition or when a roof and windshield are installed. This 13 piece heat shield kit will reflect and insulate excessive heat entering the cockpit. Installation is straight forward and these adhesive backed durable shields will increase the riding comfort for you and your passenger Blocks heat build up in the cockpit area. Adhesive backed & precision cut Premium heat reflective and insulation shielding Temperature Rating: 1000 F Made in the USA Mfg Part# 902490 010878 607078108784 Product Instructions
NEW OEM BRP Starter Motor 420684566. O-Ring 420250140 is included This fits many Vtwin machines. If you are unsure on fitment, please contact us! This replaces part numbers 420684560 420684562 420684568
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.