Shop

  • Sale!

    New OEM ATV Belt 422280366

    Original price was: $169.99.Current price is: $139.99.

    This is a brand new OEM Can-am Belt.

    It will fit all 500, 650, 800, 800R, 570, 850, 1000 Outlanders and Renegades.

    This is the factory belt for the all 2006 to current Can-am v-twin ATV’s. OEM belts are the best choice for longevity and strength.

    OLD Part Number 715000302 422280360
    NEW Part Number 422280366

    We also sell a belt change tool. Please check out our other items to make swapping this belt on easy.

    ***MADE IN USA or Japan****

  • OEM Can Am wheel bearing. Double row ball bearing.

    Fits G1 and G2 Outlander and Renegade.
    Fits Commander and Maverick.
    WILL NOT work with the Maverick X3 .

    Current Part number 293350150
    Replaces: 293350118 705400088 and 293350040

    Unsure on fitment?
    Here are the dimensions:
    30mm Inner Diameter
    60mm Outer Diameter
    37mm Wide

    Will come as pictured

  • New OEM Tail light assembly, with bulb, plug in and go! Fits late G1 and all G2L Outlander models. Part # 710001203
  • OEM Rear Differential Axle Seals (Set of 2)

    Fits on most 2013-Current Mavericks, Outlanders and Renegades

    52mm Outer Diameter (which is larger than earlier Diffs)

    30mm inner diameter.

    Comes as a Pair to do both Left and Right sides of the Differential

    705501556 Part number

  • New 2014-2019 can am commander 800 or 1000 rear driveshaft. This will not fit 2011-2013 Commanders. We install the protector to make it a straight forward install for you! This is the new style yoke that does not require a wear ring. This is an OEM CanAm shaft, do not confuse this with sub grade Chinese products. This has the larger yoke end for the 2014 to 2019 commanders 20 Spline Gearbox 20 Spline Diff Current Part Number: 703500985 Previous Part number: 703500924 703500854 705501803 This **WILL NOT** work for 2011-2013 Commanders as they have a different rear differential. This **WILL NOT** work for with Commanders Equipped with a LOCKING REAR DIFFERENTIAL.  This **WILL NOT** work for 2020 Commanders
  • NEW CV Tech Primary Clutch Puller for can am ATVs Replaces OEM puller part number 529035746 7/8" Hex Head Measurements listed in picture We have found this to work on both the ATV factory primary and CV tech primary clutches. THIS IS NOT A TOOL RENTAL, IF YOU USE THE TOOL YOU OWN IT!
  • SHIPS FREE TO THE LOWER 48 STATES Late G1 Early G2 Standard Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
  • Please verify your differential uses this style of seals before ordering! Can Am Rear Differential Pinion and Axle Seals (Timken or SKF) Fit on most 2006-2013 Outlanders and Renegades The Pinion Seal has a 70mm Outer Diameter And the standard 37mm inner diameter. The Axle Seal has a 47mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials Replaces OEM Numbers: 705400027 705500751 705501996 705401481
  • Please verify your differential uses this style of Seals before ordering! Can Am Standard Rear Differential Pinion and Axle Seals (Timken or SKF) Please measure your parts before ordering to verify fitment. The Pinion Seal has a 70mm Outer Diameter and the standard 37mm inner diameter. Replaces part number 705401481 The Axle Seal has a 52mm Outer Diameter And the standard 30mm inner diameter. Complete Seal kit for Standard Rear differentials common to find in 2016 and newer ATVs or if your differential has been repalced.
  • Brand New Genuine OEM Wear ring a must if you are replacing your pinion seal, these are the sacrificial parts that save your drive shaft from grooving! Will fit 18 and 20 Spline Yokes that are fully machined Part Number 705400036
  • New Genuine OEM Can Am High Low light switch This selects the high or low beams function on your SXS This is a two position switch. Fits Commander, Maverick and Maverick Turbo Will not fit Maverick  X3/Sport/Trail If you aren't sure if this will fit, please ask, we will help! Part number 710001725
  • New Genuine OEM  Can-Am 4 Wheel Drive Switch This selects the two wheel drive or four wheel drive on your SXS This is a two position rocker switch. Fits Commander, Maverick and Maverick Turbo Will not fit Maverick  X3/Sport/Trail If you aren’t sure if this will fit, please ask, we will help! Part number 710001737