For use with all BRP turn key type ignition switches. Will not fit RFID type ignitions. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail. Be sure to match up one wire at a time when installing, this helps avoid switching wire orientation as the wires are not color coded. The wires are 6” long so it can be fixed inside the headlight pod Sold each; includes butt connectors and zip ties Part number 2120-0943
30amp five pin relay OE supplier Song Chuan Replaces OE numbers 278002822 278002168 710001334 515176774 710000739 515176774
Impact-absorbing rubber prevents bottoming-out of winch Prevents hook rattling when not in use A must-have for preventing damage to your winch fairlead Made in the U.S.A. 2 1/2″ Diameter 1 3/4″ Thick Part number 4505-0475
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.3 compression ratio This is a ready to bolt on kit, this will work with 800HO 800R and 650 engines. If you install this on a 650 you will need to have your ecu flashed or a inline tuner installed. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420296775 420685714 420613586 420296774 420216270 420845106 420630210
New Moose fuel pressure regulator for Canam Vtwins. Part number 1009-0114
For use with WIDE size winches with a 6.60" bolt up pattern. Mounting hardware included. Replaces standard winch fairlead during plow season. Provides larger 2-1/8” diameter roller for smoother cable movement when plowing compared to standard 7/8” rollers. Roller has a curved cable groove to help eliminate cable flattening that leads to snapped cables during the plowing season. Eliminates potential cable kink due to small roller contact and abrupt angle rolls. Multiple roller positions for different applications and cable angles. For Steel Cable use only. WIDE Bolt pattern is UTV standard 6.00". Part number 105465
NEW EPI Performance Fuel/Gas Cap EPIGC6 Replaces OEM part numbers 572039600 513033025
NEW OEM High-Performance Metallic Brake Pads Designed to handle demanding riding conditions with challenging braking environments One caliper set, fits front or rear calipers on G2 ATVs Part number 715900249 interchanges with 705601014
NEW OEM High-Performance Metallic Brake Pads Designed to handle demanding riding conditions with challenging braking environments One caliper set, fits front or rear calipers on G2 ATVs Part number 715900248 interchanges with 705601015
New MOOSE UTILITY DIVISION Hi-Performance Cooling Fan - 1300 CFM Fits on some G2 Oultander/Renegade and OG Maverick, please verify your current fan motor has four mounting holes. Will not fit XMR Outlander's Part number 1901-0712 Replacement fan motor fits in part numbers: 709200564 709200309 709200462
Moose Replacement LED headlight set. Includes both LH and RH (drivers and passengers side) Fits 2017-current Maverick X3 models. Replaces oem part numbers: 710004658 710004659
All Balls dual row tapered wheel bearing Features: High contact double lip seals with armor shield O-rings sealing ID of bearing for superior water and dirt exclusion High performance tapered bearing deliver on average 95% better static load and 86% dynamic load capabilities Hardened steel 52100 and tempered for maximum durability WILL NOT work with the Maverick X3 Replaces: 293350118, 705400088 and 293350040 Unsure on fitment? Here are the dimensions: 30mm Inner Diameter 60mm Outer Diameter 37mm Wide Seal included, not all applications use the seal.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.