Brand New Genuine OEM D.E.S.S. Green RFID Key for Ball Style Ignitions Fits 2017+ Maverick X3’s, Outlanders, and Renegades. Make sure you have this style ignition. Your Can-am will need to be programmed with BUDS software for the new key to work properly. On some models these keys can be programmed as performance, normal, or a work key. This is a setting in BUDS (factory software), not preset in the key.
- New Can Am ATV Low Ratio Small Gear Box / Transmission Will work on all Can-am Vtwin 500/570/650/800/850 Both Outlander or Renegade.
- New Can-Am GEAR BOX
- Current Part Number- 420686612
- Replaces: 420684820, 420684824, 420684825, 420684827
- NEW OEM Canam Part NOT A REBUILD, ALL NEW
- This is the Low Ratio (6.4% Lower HIGH Range) gearbox than a standard 800 gearbox.
- This is found in Outlander or Renegade 500's, Outlander 650's and the Outlander 800R XMR
- New Maverick rear differential pinion housing nut socket tool. This tool will remove the nut that screws into the aluminum housing. Applying heat to the nut/housing is recommended before using this tool. There is no warranty with this tool. The nut should be left hand threaded, meaning turning counterclockwise will tighten the nut where clockwise will loosen it. Half inch drive socket. It is recommended to only use hand tools with this. Diameter (Exterior) 2 7/8" Diameter (Interior) 2 1/2"
- OUT OF STOCKNEW OEM BRP Thermostat Current part number 709200406 replaces 709200383 This style is external from the cylinder head. If you are unsure on fitment please contact us.
- New Demon Heavy Duty Axle Front Left (opposite throttle side) Fits: 2019+ ATV Outlander/Renegade 650 850 1000R Part number PAXL-3062HD Replaces OEM 705402237 705402235 Through years of research and development Demon Powersports has developed an axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger. Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity. These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40° articulation over terrain on the inboard joint. The outboard joint can travel 0.5inches and swing from 45°-47° depending on the model. The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion. Trust in Demon Heavy Duty Axles to keep you riding!! • 15%-20% increase in diameter compared to regular axle • Inner cage made up of 4340 chromoly steel • Dual heat treated high strength chromoly steel shaft • Thermoplastic polyester elastomer (TPEE) Boot • 10%-15% increase in CV joint size compared to regular joints • Wider articulation angles • Dual plunge design prevents axle from binding • Packed with high load molybdenum grease Precision CNC machined • Can Fit 1.5”- 5” Bracket lift of particular brands/ All Portal Gear Lifts / 1.5”- 5” A-arms of particular brands • 1-year ltd warranty
- New Demon Heavy Duty Axle Front Right (throttle side) Fits: 2019+ ATV Outlander/Renegade 650 850 1000R Part number PAXL-3063HD Replaces OEM 705402238 705402236 Through years of research and development Demon Powersports has developed an axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger. Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity. These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40° articulation over terrain on the inboard joint. The outboard joint can travel 0.5inches and swing from 45°-47° depending on the model. The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion. Trust in Demon Heavy Duty Axles to keep you riding!! • 15%-20% increase in diameter compared to regular axle • Inner cage made up of 4340 chromoly steel • Dual heat treated high strength chromoly steel shaft • Thermoplastic polyester elastomer (TPEE) Boot • 10%-15% increase in CV joint size compared to regular joints • Wider articulation angles • Dual plunge design prevents axle from binding • Packed with high load molybdenum grease Precision CNC machined • Can Fit 1.5”- 5” Bracket lift of particular brands/ All Portal Gear Lifts / 1.5”- 5” A-arms of particular brands • 1-year ltd warranty
NEW Gboost Primary Clutch Puller. DCP19
Fits: Can-Am
Defender 2016-20 HD8 DH10
Maverick Trail 2018+
Maverick Sport (all) 2018+
Maverick X3 (all models) 2017+Replaces oem 529000064
All GBoost pullers start out with annealed, cold-rolled alloy steel.
Oil Quenched
Tempered
Rockwell hardness between 50-55
Zinc plated to prevent rust and thread deterioration
Machined to exact specifications in the U.S.A.
This results in31% higher tensile strength
19% higher yield strength
Stronger than any existing OEM pullers