SHIPS FREE TO THE LOWER 48 SATES Can-am 13 bolt ATV CVT cover set. This will fit on any 2006-current v twin ATV, Renegade or Outlander, 500 650 800 or 1000. This cover will not clear primary clutches with studs (1000R applications) This is the kit many swap to, this kit will keep the water out! We recommend a light coat of thread lubricant on the cover screws, keeps the inserts from spinning. Comes with: XMR Clutch covers inner and outer. Center Rubber Gasket Drain plug with clamp PTO O-ring Hardware to attach inner cover to gearbox/engine Gear box O-ring 13 Cover screws (hex head style) Part Numbers: 420611397 420611390 420611391 420611393 420611407 420440568
CVT Rear Boot (the boot that connects to the exhaust side of the inner CVT cover plate. This is the updated part and will work on all G1 V-Twin ATV’s . This replaces 707000789, this newer style will not work on the xmr 2011-12 where the exhaust riser pipe meets the upper tube. Current Part Number 707001274
Can Am 2013+ G2 Outlander CVT Filter Base Part Number: 707001171 New OEM Will come as pictured
Brand New Genuine OEM Can-am Inner Cover Air Guide Clutch backing plate, this is the part that is against the engine and gearbox on most every can-am v twin. 13 Bolt design allows for better sealing We recommend adding anti seize thread lubricant when installing your cvt cover bolts. Old Part Number 420611409, 420611408 Current Part Number 420612304
Brand new Genuine OEM flexible CVT intake adaptor for Renegade, Outlander, Maverick, and Commander.
This replaces the thin rubber boot that comes on many early CanAm V-Twin models.
Very nice upgrade for a cracked CVT intake boot.
Current part number 707002585
Previous part numbers 707001467, 707001043, 707000719
SHIPS FREE TO THE LOWER 48 STATES OEM Outer CVT Cover 2013 Maverick 1000R ONE Breather hole in front of Primary clutch. This is the cover with the most room. Common to use this on newer Vtwin Mavericks with aftermarket clutches that do not require the extra breathers. Current Part Number: 420612313 replaces 420612312 Will not fit Maverick X3/Sport/Trail
Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 415129355 replaces 710002312
Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 710001473 replaces 710001417
Driven Pulley Extractor bolt for belt changes This spreads the secondary with the 708200686 adapter tool. Works with: Can Am Defender HD8 HD10 Part number 529036352
SHIPS FREE TO THE LOWER 48 STATES Brand NEW OEM Transmission Drive Belt OEM belts are the best choice for longevity and strength. Will fit: Defender HD8 HD10 Maverick Trail 800 Maverick X3 900HO (non turbo) Current Part number 422280656 Replaces 422280654
Can Am Maverick X3 Maverick Sport/Trail or Defender Belt change kit. M36x2.0 thread size works on all X3’s and Defenders Will not fit QRS clutches found on “OG” mavericks This is a OEM tool and bolt Spreader It is recommended to use a coin in between the bolt and the clutch to avoid marring up the clutch. The bolt has the correct T30 bit on one end to remove the cvt cover bolts with your 13mm wrench/socket. We highly suggest a ratchet and T30 socket on a 3 inch extension to speed up the job. Part number 708200720 and 529000088 This set works in place of 708200686
New OEM Defender, Maverick Trail/Sport Clutch Cover Kit Will fit the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R Kit includes Outer Cover 420212500 Inner Cover 420212600 Gasket 420450400 O-ring set 420450431/420430408 Bolt set 420441575 Drain plug with O-ring 420441820
