Shop

  • SHIPS FREE TO THE LOWER 48 STATES OEM Outer CVT Cover 2013 Maverick 1000R ONE Breather hole in front of Primary clutch. This is the cover with the most room. Common to use this on newer Vtwin Mavericks with aftermarket clutches that do not require the extra breathers. Current Part Number: 420612313 replaces 420612312 Will not fit Maverick X3/Sport/Trail
  • New NGK Spark Plug 90526 OEM part number 715900492 415130363 NGK part number LMAR9AI-8D These spark plugs work in 2017 Maverick X3 900 triple engines Thread Diameter 10mm Thread Pitch 1.0mm Seat Type Gasket Reach 26.5mm (1.04") Hex Size 9/16" (14mm) Terminal Type Solid Gap .031" (0.8mm) Center Electrode Material Iridium Type Fine Wire Size 0.6mm Projection Projected Ground Electrode Material Nickel Type Standard Shape Taper Cut Quantity 1 Resistor Value 5k Ohm Heat Range 9 Torque Specs Aluminum: 7.2-8.7 lb. ft.
  • Brand New Moose Utility 13 Bolt CVT Cover Gasket

    Works on 7 bolt covers also.

    Part number 0935-1193

    replaces: 420430127 420430126 420430124 420430123 420430120

  • OUT OF STOCK

    New Genuine OEM Works on 2014-2020 Commander and Commander Max (2011-2013 Do not have a oxygen sensor) 2013-2018 Maverick and Maverick Max 2017-2020 Maverick X3 and Maverick X3 Max 2018-2020 Maverick Trail 2019-2020 Maverick Sport 2017-2020 Defender and Defender Max If your machine has ECO mode it will have a oxygen Sensor from factory Part number 707600872

  • SHIPS FREE TO THE LOWER 48 SATES Can-am 2013 1000R Maverick Commander style CVT covers. This is the 13 bolt cover set. Popular for aftermarket clutch set ups. Only one breather hole in front of the primary clutch works on non Turbo Machines This kit will keep the water out! Comes with: 2013 Maverick 1000R covers inner and outer. CVT Cover Gasket CVT plug PTO O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part Numbers: 420612312 420612313 420611407 420440568

  • Can Am Commander 800/1000 rear differential oil seal This is a genuine OEM oil seal 55mm outer diameter 30mm inner diameter Will come as pictured Part Number 705502110 replaces 705501879
  • Brand New OEM Starter Relay Will work on Defender, Maverick, and Commander 2014 and Newer Be sure to check this is the correct solenoid for your machine. A quick visual inspection will verify its the correct part.
  • 800/1000 Top end Gasket set Includes: 2 Head Gaskets 2 Cylinder Base Gaskets 2 Valve Cover Gaskets 2 Exhaust port crush gaskets 2 Intake Manifold Seals 8 valve seals Various O rings for fuel injectors, coolant fittings etc.. Moose gaskets are made to the same high quality standards as OEM. Part number 0934-3017
  • New OEM BRP secondary spring. Found on many 1000/1000R and 850 models. Current Part number 420638040 Replaces 420238177
  • RHINO ROLLER Kit 2 Pack Driven Clutch Upgrade Fitment: All Can-AM Models w/2 Roller Driven Clutch
    • 2015-2017 Maverick 1000R Turbo XDS-DPS / Max
    • 2016+ Defender HD10 / MAX
    • 2016+ Defender HD8 / Max
    Replaces OEM # 420629211 / 417127016 ***MADE IN USA*** Designed for units with Over-sized Tires, Heavy Workload and High Horsepower. Made from the Latest Heat Resistant Compounds, which can withstand Continuous Heat up to 340 degrees. These Rollers Resist Flat Spotting, Provide Excellent Strength, Rigidity and Longevity.
  • New Demon Heavy Duty Axle Rear Right (throttle side) Fits: 2006-2018 ATV Outlander/Renegade 500 570 650 800HO 800R 850 1000 1000R Part number PAXL-1129HD Replaces OEM 705500868 705500983 705501484 705502473 705501486 Through years of research and development Demon Powersports has developed an axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger. Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity. These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40° articulation over terrain on the inboard joint. The outboard joint can travel 0.5inches and swing from 45°-47° depending on the model. The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion. Trust in Demon Heavy Duty Axles to keep you riding!! • 15%-20% increase in diameter compared to regular axle • Inner cage made up of 4340 chromoly steel • Dual heat treated high strength chromoly steel shaft • Thermoplastic polyester elastomer (TPEE) Boot • 10%-15% increase in CV joint size compared to regular joints • Wider articulation angles • Dual plunge design prevents axle from binding • Packed with high load molybdenum grease Precision CNC machined • Can Fit 1.5”- 5” Bracket lift of particular brands/ All Portal Gear Lifts / 1.5”- 5” A-arms of particular brands • 1-year ltd warranty
  • New OEM Genuine BRP G2 Outlander LEFT side cargo support bracket Old part number 705005037 New part number 705006997