Shop

  • Brand: Can-Am Part Number: 710004567
      • Required for installation of Heated Hand Grips & Throttle Combo.
     
    • Fits: (G2L) 2015-2016 Can-Am Outlander L 450, 2015 Can-Am Outlander L 500, 2016 Can-Am Outlander L 570, 2015-2016 Can-Am Outlander L Max 450, 2015 Can-Am Outlander L Max 500, 2016 Can-Am Outlander L Max 570, 2017-2020 Can-Am Outlander 450, 2017-2020 Can-Am Outlander 570, 2019-2020 Can-Am Outlander Max 450 6x6
  • New Aftermarket 1000/1000R Crankshaft with Connecting rods and bearings. No core needed, ready to install. *Will not fit Defender Maverick Sport/Trail* Replaces OE parts: 420219735 420219736 420217556 420217559 420641477 420641475 420233726
  • New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.3 compression ratio This is a ready to bolt on kit, this will work with 800HO 800R and 650 engines. If you install this on a 650 you will need to have your ecu flashed or a inline tuner installed. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420296775 420685714 420613586 420296774 420216270 420845106 420630210
  • Updated Can-am Rear G2 Driveshaft Fits: 2019+ Outlander 1000R (excluding MAX and XMR) 2019+ Outlander 650/850 (excluding MAX) 2019+ Renegade 650/850 All new all OEM Shaft OEM U-joints. OEM protector ring installed Gearbox side yoke swapped to 18 spline Current Part number: 703500988 Previous Part number: 703500858 703500931 If you have a 2019+ 570  short wheel base single rider, this may be the correct shaft for your application, the parts fiche may not show the correct part number. You will need to measure the outer diameter of your rear differential's pinon seal, this shaft will only work with machines that have a 80mm pinion seal. If you measure 70mm you will need 703500986. 20 spline differential side yoke (fits 705502808/705502546 rear differential) 18 spline gearbox side yoke (small gearbox size) No wear ring needed, the deferential side yoke is machined to the outer diameter that a wear ring would be.
  • Can-am Rear Driveshaft G2 2019+ G2 Renegade 1000R base, XXC or XMR All New All OEM Shaft OEM U-joints, with OEM gearbox seal protector installed. **Please note, this is the most updated shaft and does not require a wear ring on the differential side of the shaft. The last two pictures illustrate this.** 20 Spline Gearbox side yoke (fits large type gearboxes) 20 Spline Differential side yoke (fits fits 705502808/705502546 rear differential) Current Part number: 703500990 Previous Part number: 703500928 703500901
  • NEW OEM BRP Thermostat Current part number 709200406 replaces 709200383 This style is external from the cylinder head. If you are unsure on fitment please contact us.
  • Brand New Genuine OEM Radiator

    Fits 2011-2020 Commander and 2013-2018 Maverick (non X3/Sport/Trail)

    Current Part Number 709200395 Replaces Part Number 709200252

  • SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Cam Chain and Guide Set  for V Twin 1000 Order QTY 1 (one) per engine. Kit includes: 2 Silent Chains 420297068 2 Pivot Guides 420436017 2 Fixed Guides 420236583 2 Bottom Guides 420236350 ONLY WORKS WITH 1000 V TWINS To install the timing chain kit you will need to remove the PTO Cover, Stator  Cover, and cylinder heads. We sell the gaskets and pullers required to do this.  Check our other listings for these products
  • NEW Can Am OEM Cam Timing Tool For holding the cam in place for timing and tightening camshaft sprocket bolts For easy installation of new timing chains or just setting timing. OEM Number 529036268 replaces 529036231
  • LinQ Stackable Fuel Caddy with brackets to mount on G2 ATV’s and SXS with the LinQ system

    WILL NOT FIT G2L or G1 ATV LinQ mounting holes need to be 16″ on center

    14.5-liter (3.8 US gallons) capacity

    Very solid mounting system for carrying extra fuel

    No tools need to install, mounting blocks twist into place and lock in solid.

    This caddy has a rubber strap to secure the lock 100%

    Part numbers: 715004960 295100752

  • New Genuine OEM Rear Differential Lock Switch Only works on models with turf mode Part number 710005470
  • NEW EPI Primary Clutch Puller. PCP-15 (PCP15)

    Fits: Can-Am 1000 Defender 2016+ HD8 DH10
    Maverick Trail 2018+ 1000
    Maverick Sport (all) 2018+
    Maverick X3 (all models) 2017+

    Replaces oem 529000064

    One piece style, manufactured from the highest quality steel

    Precise machining on every model for accuracy

    Heat treated for superior strength