Front and Rear Seals for the engine thru shaft. These are high quality Timken brand seals Replaces OEM part numbers: 420430589, 420430580, 420850055
Dash/Speedometer for 2008-2012 Outlander 500 650 and 800 MAX or STD . This is the factory Gauge.
The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information.
It will display 0 miles, please record your current miles for your records.
If you are looking for a dash (715900042) for your 06-07 V twin Outlander, this will retro fit. Click here for the guide on the Analog To Digi Dash Repin
Current part number: 710003100
Replaces part numbers: 710001472 710001527 710001978 710001985 710002178 710002474 710001068
SHIPS FREE TO THE LOWER 48 STATES Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Part number 703500945 Replaces 708001316
Seat Bottom Fits Commanders, and Mavericks. 800 or 1000 Will not work on Maverick X3/Sport/Trail Current part number 703500943 Replaces part numbers: 708001085 708001102 708001318
SHIPS FREE TO THE LOWER 48 STATES 0934-3019 Moose Racing Gasket Kit Fits Outlander/Renegade 800 models. Complete kit with oil seals. Center case gasket Magneto Cover Gasket PTO Cover Gasket Two Cylinder base Gaskets Two Cylinder Head Gaskets Two Valve Cover Gaskets Water Pump Cover Seal (kit does not come with mechanical seal)
Can-am Commander style Outer CVT cover belt box Please check your cover before ordering, we can help if you do not know what to look for. This is the updated 13 bolt cover with the heat shield. Fits: Commander 800R two seat 2011-2020 Commander 800R MAX four seat 2016 Commander 1000 two seat 2011-2017 Part number 420612472
NEW OEM Can-Am Variator CVT Clutch Outer Cover Belt Box This part is made for 2016-current Outlander and Renegade 1000R’s Perfect for a machine with a larger aftermarket clutch or any machine using a Maverick Primary with a stud/nut, as this cover has more room inside. **NOTE: This cover does not have any extra venting holes** Current Part number: 420612316 Old Part number: 420612310
Can-am Outer CVT Cover, belt box. This is the updated 13 bolt cover. Works with 7 or 13 bolt inner covers. This will fit on any 2006-current v twin ATV, Renegade or Outlander, 500 650 800 or 1000. If you have a a stud with a nut retaining your primary clutch this cover does not have the depth needed. Many 1000R machines use a stud/nut in place of the bolt. Unsure on fitment, please ask! This will keep the water out! 13 Cover bolt holes Current Part number is: 420611397 Replaces: 420611395, 420611390, 420611391, 420611393
SHIPS FREE TO THE LOWER 48 STATES OEM Outer CVT Cover 2013 Maverick 1000R ONE Breather hole in front of Primary clutch. This is the cover with the most room. Common to use this on newer Vtwin Mavericks with aftermarket clutches that do not require the extra breathers. Current Part Number: 420612313 replaces 420612312 Will not fit Maverick X3/Sport/Trail
Canam Outer CVT Cover Commander/Maverick 1000R Please look at pictures to verify fitment. This has two breather holes, one in front of the primary, one on the secondary. This cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather. Fits: Commander 1000R two seat 2018-2020 Commander 1000R MAX four seat 2018 Maverick 1000R two seat 2014-2018 Maverick 1000R MAX four seat 2014-2018 Will not fit: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR If you have questions please ask! Current Part number 420212286 replaces 420612319 420612470
SHIPS FREE TO THE LOWER 48 STATES Set of Bearings and Seals to Rebuild Your Front Differential on Your Can-Am Fits Most Can-Am Models from 2007-Current (WILL NOT FIT Maverick X3/Sport/Trail or Defender) This Kit has High Quality Aftermarket Bearings which are: Timken, SKF, NSK, KOYO, Nachi Comes with: 2 - Carrier Bearings- SKF Brand 2 - Axle Bearings- OEM NSK Japan made 2 - Axles Seals- Timken 1 - Inner Pinion Bearing- Nachi Japan made 1 - Large Pinion Bearing- Koyo Japan made 1 - Pinion Seal
Brand New Genuine OEM 13 Bolt CVT Cover Gasket
Works on 7 bolt covers also.
Part number 420430127 replaces: 420430126 420430124 420430123 420430120
NEW OEM Tool 529036302 This removes the large housing nut on G2 XMR Rear Differentials Also works on 2019 ATV Rear differential housing nuts. please note there may be some casting flare on your housing nut you may have to file to get the tool to fit, as it is a very tight fit.
Mohawk Dash for Can-Am Renegade Will work all Renegades G1 or G2. up to 2020 Clean way to hide custom snorkels Factory OEM part 705009685
NEW OEM Can-am Secondary Clutch Bolt M10X110 Hex head used with many canam secondary clutches, fitment questions please ask. Part number 420441485
EPI Lower Ball Joint Fits: G1 Outlanders 400 500 650 800 Replaces OEM: 706200444 This style of ball joint bolts to the lower control arm. If you are unsure of fitment, please ask! 2006 - 2014 Can-Am Outlander 400 2007 - 2012 Can-Am Outlander 500 2008 - 2012 Can-Am Outlander 650 2006 - 2011 Can-Am Outlander 800 2006 - 2013 Can-Am Outlander Max 400 2007 - 2013 Can-Am Outlander Max 500 2007 - 2012 Can-Am Outlander Max 650 2006 - 2012 Can-Am Outlander Max 800
Can-Am Rear Transmission Seal. Fits Large Gear Boxes, Standard and Low Ratio. Brand New OEM Seal OUTPUT SHAFT SEAL found on rear of gearbox, just in front of the rear driveshaft. This is the seal that goes on the rear, where the rear driveshaft goes out to the rear differential. If you are unsure if this is correct, please measure your current seal. If you get close to these specs it should work, the other option is much smaller in outer diameter. 72mm outer diameter 35mm inner diameter Current part number: 420831955 420831956
Rear Differential Seal kit for differentials with 80mm outer diameter pinion seal
1 Pinion Seal, 80mm
2 Axle Seals, 52mmBrands we use include : Timken, Dichtomatik and SKF
Fits:
2013 to Current Outlander 1000/1000R XMR
2015 to Current Outlander 800/850 Xmr
2016 to Current Renegade 1000R XMR
2019 to Current 650 and Larger ATVs
Also some 2019 to Current 570 XMR (measure your parts to verify fitment)*** THIS WILL NOT WORK IN 2013-2018 650/570 XMR or 2011/2012 800 XMR machines. If you are unsure about fitment please contact us! ***
New Genuine OEM handle for your commander cargo box. Will work on the upper tail gate or lower cargo door Part number 708300398
Brand New Genuine OEM D.E.S.S. Green RFID Key for Ball Style Ignitions Fits 2017+ Maverick X3’s, Outlanders, and Renegades. Make sure you have this style ignition. Your Can-am will need to be programmed with BUDS software for the new key to work properly. On some models these keys can be programmed as performance, normal, or a work key. This is a setting in BUDS (factory software), not preset in the key.
Can Am Maverick 1000R secondary spreader M25x1.5 thread size, to verify fitment 100% measure your clutch where this threads in. This works on the QRS style secondary clutches pictured. This will NOT work on the X3 models Bolt is not included Part number 708200504
SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Cam Chain and Guide Set for V Twin 1000 Order QTY 1 (one) per engine. Kit includes: 2 Silent Chains 420297068 2 Pivot Guides 420436017 2 Fixed Guides 420236583 2 Bottom Guides 420236350 ONLY WORKS WITH 1000 V TWINS To install the timing chain kit you will need to remove the PTO Cover, Stator Cover, and cylinder heads. We sell the gaskets and pullers required to do this. Check our other listings for these products
New OEM Engine Case Half Gasket. Fits All G1 Can-Am V-Twin Engines. Fits 500, 570, 650 G2 V-Twin Engines Part Number: 420651220
Brand New OEM PTO Cover Gasket for V-Twin Engines Part number 420651211
Brand New OEM Stator Cover Gasket for V-Twin Engines. Fits 2006-Current V twin’s Part number 420651201
New OEM Engine Case Half Gasket. Fits most G2 Can-Am V-Twin Engines. This is for the longer stroke (75mm) cases. Old Part Number: 420651225 New Part Number: 420651227
Seat Rubber Bumper. This is the part that isolates the seat from the frame. Simply pops into the seat frame. OLD part number 708000899 NEW part number 708001671
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.