Can Am 2016 2017 Maverick Turbo Brown Fuel Injector Genuine OEM Part Part number: 420274255
Canam CVT Cover Kit Commander/Maverick 1000R
Please look at pictures to verify fitment.
This outer cover has two breather holes, one in front of the primary, one on the secondary.
This outer cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather.
Please look at pictures to verify fitment.
Fits:
Commander 1000R two seat 2018-2020
Commander 1000R MAX four seat 2018
Maverick 1000R two seat 2014-2018
Maverick 1000R MAX four seat 2014-2018Will not fit:
2015-2018 Maverick 1000R Turbo
2017-2018 Maverick 1000R XMRInner cover 420612304
Outer cover 420212286
13 Hex head CVT housing bolts 420440568
Gasket 420430126
O-rings – 420430407 and 420631087
Hex Bolts – 420440207
Also has a nut and washer – 232561434, 224061121
Nylon drain plug and clamp- OUT OF STOCK
New OEM Differential Pinion Oil Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: Gen 1 Front and Rear Diffs 2012-18 Outlander and Renegade Front and Rear Early Commander Rear All Maverick and Commander Front WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL or 2019 and newer Measurements: 70mm outside diameter and 37mm inside diameter Part number 705401615 
Cast Aluminum Valve cover set with Stainless bolts. Replaces your factory plastic valve covers on any can-am V-twin ATV or UTV If you have aftermarket camshafts you may need to clearance the cover with a dremel. 500/570/650/800/850/1000/1000R Replaces OE Numbers: 420610390 420610394 420610393 420610395
Spicer Brand U joint for front drive shafts
Fits: G1 Renegade and Outlander . Also works on Outlander 400 Rear shafts.
Maverick/Commander front driveshaftsWill not fit: Maverick X3/Sport/Trail or Defender
Includes clips, and grease fitting.
Pro tip: Install grease fitting before pressing in u joint.
Install u joint in a manner where you can still grease the joint in chassis.Replaces OEM : 715900325 703000023 703000024 703500002 703500135 703500607 703500814
- OUT OF STOCK
Can Am Outlander Renegade Power Steering Pitman Arm Will work on 2012-2017 500 650 800 1000 Gen 2 machines Part numbers 703500785 703500812 
Cam-Am Maverick Rear Differential Pinion Gear Fits 2013-2018 Maverick Turbo or non turbo Will not fit X3/Sport/Trail Models Comes with Pinion and Bearings Part Number: 703500867
NEW Genuine OEM Fuel/Gas Cap Fits most every Can-am ATV Renegade or Outlander Part Number: 513033025
Brand New Genuine OEM Start/Stop Switch
Will come as pictured
Works on many V-twin ATV’s Renegades and Outlanders
Will not work on 400’s
Please look at the plug style on your current switch. The buttons may be arranged differently than the switch you are replacing.
We have found this switch will work on all V-twins DPS or non DPS 2006 to 2015
Current Part number: 703500920 Replaces: 710003062 710002883 710003039 710004041
- OUT OF STOCK
OEM CVT intake breather P/N 707000777 Will work on 2006 to 2011 can-am v-twins(500,650,800) and 2012 500/650 800MAX Please understand 2012 800 Outlanders are G2 and 2012 Outlander Max 800 are G1 If you are unsure on fitment, please ask us! 
OEM Air Filter for Gen 1 Outlander and Renegades. Fits 500, 650, and NON-R 800 engines, from 2006 - 2012. Comes as Pictured.
OEM Air Filter for Gen 1 Outlander and Renegades. Larger style air filter found on 800R machines. OEM part number: 707800288
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.