Vertex-Winderosa 810985 Top End Gasket Kit Fits 2016+ Outlander and Renegade 570
SHIPS FREE TO THE LOWER 48 STATES
Used OEM Rotax Rear cylinder head with 31mm intake valves, 27mm exhuast valves, valve springs, valve seals, keepers, retainers and rocker arm assemblies.
Part numbers for this include 420613526 420613530 420613531 420613532
We disassemble, clean and surface plate the head, this is ready to install on your engine.
You may want to consider changing the valve seals although they have a very low failure rate!
This will not fit 1000 engines
New Genuine OEM steering stem for G2 Outlander and Renegade This will only fit NON power steering models Will not work on power steering bikes Current Part number 709401008
Genuine Can Am 800R/1000 Green Fuel Injector OEM Part Part number: 420874833 replaces 420874830
Part Number 715008101
Molded heavy-duty aluminum mirror.
Stays in place on rough trails.
Ball-joint design for steady multi-angle adjustment and outstanding vision.
Use with or without any BRP roof, BRP windshield or BRP doors.
Fits either side.
Sold individually.
New Genuine OEM power steering stem for Outlander and Renegade This will only fit power steering models Will not work on NON power steering bikes Current Part number 703501137 Old Part Numbers 709400703 709401843- Sale!
This is a brand new OEM Can-am Belt.
It will fit all 500, 650, 800, 800R, 570, 850, 1000 Outlanders and Renegades.
This is the factory belt for the all 2006 to current Can-am v-twin ATV’s. OEM belts are the best choice for longevity and strength.
OLD Part Number 715000302 422280360
NEW Part Number 422280366We also sell a belt change tool. Please check out our other items to make swapping this belt on easy.
***MADE IN USA or Japan****
- OUT OF STOCK
EPI roller kit Part number WE210933 The rollers in this kit were designed by The Clutch Guys to replace the stock composite rollers. They are CNC machined and hardened for a long service life. The stock composite rollers that Can Am uses tend to flat-spot very quickly, resulting in greater friction and reduced primary clutch reaction. Upgrade to these custom metal rollers for improved clutch function. The kit includes 6 custom metal rollers with bushings, 6 roller pins and 12 roller washers Replaces oem numbers: 420233893, 417223257, 420229995, 417223767, 420626230, 420626231 
SHIPS FREE TO THE LOWER 48 STATES Late G1 Early G2 Standard Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
SHIPS FREE TO THE LOWER 48 STATES Standard G2 Rear Differential Bearing and Seal Kit High quality aftermarket bearings along with double lip axle seals. Bearing and Seal Brands include: Nachi, KOYO, NTN, Timken, SKF The large case sealing and pinion gear O-rings are NOT included as a cost saving measure, these O-rings are reusable if not damaged. There are a few options for kits, please verify your differential uses this style of gears before ordering! This will only fit six mounting hole differentials. Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 2 1/16″ (52mm) To further verify fitment you can measure your pinion pilot shaft, this should be 5/8″ (16mm) The last pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees. Fits 2015 and newer G2 style ATV 500/570/650/800/850/1000/1000R NON-XMR style REAR differential.570/650 XMR machines do not have the true XMR differential.
Can Am 2016 2017 Maverick Turbo Brown Fuel Injector Genuine OEM Part Part number: 420274255
SHIPS FREE TO THE LOWER 48 STATES New Engine Top End Gasket Set by Moose Racing Fits 500 and 650 Machines Comes with: Cylinder Base Gaskets Cylinder Head Gaskets Valve Stem Seals Valve Cover Gaskets Injector Seals Intake Gaskets and Seals Exhaust Gaskets Thermostat O-Rings Coolant O-Rings Tensioner O-Rings Moose Racing gaskets are made to the same high quality standards as OEM gaskets Part number 0934-3016
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.