Shop

  • New Demon Heavy Duty Axle Front Left (opposite throttle side) Fits: 2019+ ATV Outlander/Renegade 650 850 1000R Part number PAXL-3062HD Replaces OEM 705402237 705402235   Through years of research and development Demon Powersports has developed an axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger. Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity. These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40° articulation over terrain on the inboard joint. The outboard joint can travel 0.5inches and swing from 45°-47° depending on the model. The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion. Trust in Demon Heavy Duty Axles to keep you riding!! • 15%-20% increase in diameter compared to regular axle • Inner cage made up of 4340 chromoly steel • Dual heat treated high strength chromoly steel shaft • Thermoplastic polyester elastomer (TPEE) Boot • 10%-15% increase in CV joint size compared to regular joints • Wider articulation angles • Dual plunge design prevents axle from binding • Packed with high load molybdenum grease Precision CNC machined • Can Fit 1.5”- 5” Bracket lift of particular brands/ All Portal Gear Lifts / 1.5”- 5” A-arms of particular brands • 1-year ltd warranty
  • New Demon Heavy Duty Axle Front Right (throttle side) Fits: 2019+ ATV Outlander/Renegade 650 850 1000R Part number PAXL-3063HD Replaces OEM 705402238 705402236   Through years of research and development Demon Powersports has developed an axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger. Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity. These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40° articulation over terrain on the inboard joint. The outboard joint can travel 0.5inches and swing from 45°-47° depending on the model. The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion. Trust in Demon Heavy Duty Axles to keep you riding!! • 15%-20% increase in diameter compared to regular axle • Inner cage made up of 4340 chromoly steel • Dual heat treated high strength chromoly steel shaft • Thermoplastic polyester elastomer (TPEE) Boot • 10%-15% increase in CV joint size compared to regular joints • Wider articulation angles • Dual plunge design prevents axle from binding • Packed with high load molybdenum grease Precision CNC machined • Can Fit 1.5”- 5” Bracket lift of particular brands/ All Portal Gear Lifts / 1.5”- 5” A-arms of particular brands • 1-year ltd warranty
  • NEW Gboost Primary Clutch Puller. DCP19

    Fits: Can-Am
    Defender 2016-20 HD8 DH10
    Maverick Trail 2018+
    Maverick Sport (all) 2018+
    Maverick X3 (all models) 2017+

    Replaces oem 529000064

    All GBoost pullers start out with annealed, cold-rolled alloy steel.

    Oil Quenched
    Tempered
    Rockwell hardness between 50-55
    Zinc plated to prevent rust and thread deterioration
    Machined to exact specifications in the U.S.A.
    This results in

    31% higher tensile strength
    19% higher yield strength
    Stronger than any existing OEM pullers

  • New OEM inner clutch cover O-ring kit Comes with the following parts Small O-ring 420430408 Large O-ring old part number 420450430 or current part number 420450431 This kit will fit the following machines 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R  
  • New OEM Grey RFID Key for Ball Style Ignitions Fits 2017-2018 Maverick X3’s, Outlanders, and Renegades. Make sure you have this style ignition. Key will have to be programmed using BUDS (Local Dealer) Part Number: 710004964

  • OEM Rotax Piston Ring Set for 400, 800, and 1000cc engines 91mm bore size Complete kit for one factory piston Part Numbers: 420296774 420685244
  • New OEM Engine Case Half Gasket. Fits All G1 Can-Am V-Twin Engines. Fits 500, 570, 650 G2 V-Twin Engines Part Number: 420651220
  • Brand New Genuine OEM Grey Electronic Key. The key will need to be programmed with BUDS software to your ATV or UTV to work. Feel free to contact us about programming These keys can be programmed as performance, normal, or a work key You can program multiple keys to your ATV or UTV Part number 710002183
  • New G2 dual piston Left Right Brake caliper with OEM pads. Fits G2 Renegade and Outlander 2012-current Genuine OEM part. Part number 705600860
  • OUT OF STOCK

    Brand NEW OEM Genuine CVT Transmission Drive V Belt Will fit Maverick and X3. Will also fit other machines. Must check part numbers to confirm fitment. Will work on Ski Doo snowmobiles as well Current Part Number 417300531 Old Part Number 422280651 IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT.  FITMENT QUESTIONS?? PLEASE ASK!

  • Dash/Speedometer for G2 500/650/800/1000 bikes. This is the factory Gauge/Screen. for 2012 2013 G2 models. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part Number 710003103 Replaces Part Number 710002696 Will NOT fit 2013 Outlander 650 XMR
  • Slider Blocks for Trailbloc Primary clutches for CANAM ATVS This is a set of six, you will need to transfer over your weights. Part number 0930-3022
  • All Balls dual row tapered wheel bearing for Maverick X3 replaces OEM numbers 293350109 293350129 High contact double lip seals with armor shield O-rings sealing ID of bearing for superior water and dirt exclusion High performance tapered bearing deliver on average 95% better static load and 86% dynamic load capabilities Hardened steel 52100 and tempered for maximum durability
  • Aftermarket Fuel pump kit with pickup sock lines and seal Part number 1009-0090 Works with:  2016+ Defenders HD5 HD8 HD10 Outlander 450/570 and Renegade 570 Replaces the pump in sending units part numbers 709000461 and 709000662
  • Brand new outer secondary clutch

    This is found on many BRP ATVs. Please ask if you have fitment questions.

    New OEM Part Part Numbers : 420280173 420280176 420280178

  • NEW OEM BRP Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 715900265 Works with base digital dash, if you are unsure on fitment please contact us we will help.
  • New Genuine OEM Part number 860200387 Fits G1 G2 and G2L Renegade Outlander and Outlander MAX machines Will not fit G3L models ?Comes with spare key  Will come as pictured
  • New Genuine OEM Wide angle convex mirror Can be used with or without windshield, roof, or cab enclosure Part number 715003638
  • SHIPS FREE TO THE LOWER 48 STATES Squadron Green wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450 Both are brand new. Part numbers 715006117 & 715001378

  • Radiator Relocate kit for Gen 2 Renegade 570 650 800 850 1000 1000R 2012-2022. Renegade Extreme Front Bumper (715002469) required for installation (except on XMR models) Part Number: 715001929. New Genuine OEM. Will come as pictured.
  • Works on the G1 Outlander, G1/G2 Renegade, and nearly any other utility quad with available mounting area (8"x3") Includes 2 foot pegs and mounting hardware. Foot Pegs measure 9" long by 3" wide These Rox Speed FX Universal ATV Foot Pegs for utility quads have been designed to add aggressive traction to your OEM floor boards. Used by some of the top GNCC riders, these foot pegs are MADE IN THE USA and built to handle the dirtiest, nastiest terrain you can throw at them! Replaces OEM pegs 705000428 705003648 705002326
  • OEM Rotax Cylinder Base gasket Fits many Canam ATVs Outlander/Renegade 450 or 850 Unsure on fitment? Please ask! Part number 420450330
  • Genuine OEM Radiator

    2016-2020 Defenders HD5, HD8, and HD10

    2017-2020 Defender Max HD8 and HD10

    Part number 709200951 replaces 709200533

  • MOOSE UTILITY Shifter Cable Part Number 0652-2427 Replaces OEM numbers 707001468 707002227 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 112 inches long from end to end Fits three seat models: 2016-2019 Defender HD10/HD8/Hd5