OEM Can-am Low Beam Headlight Does not include any mounting brackets or hardware, what is pictured is what is shipped to you. Fits: Renegade, Commander and Maverick (non X3/Sport/Trail) Will not fit on Outlanders. Outlanders use reflector style headlights on the low beams. Part Number: 710002524
Fitment: Can-Am X3 Driven clutch- 2017-2020 Maverick X3 / 900 H.O. Models.
- Replaceable adapter ends.
- Easily removes pins without damaging clutches
- No slide hammer necessary for removal.
- Replaceable adapter ends.
- Zinc plated to prevent rust and improved strength.
- Tool comes with 2 replacement tips.
- Heat Treated.
NEW extra firm G1 outlander 500 650 800 800R seat foam. Use with seat part numbers 715500323 708000756 708000507 708000402 708001649 This is just the foam, no cover or pan.
NEW SEIZMIK STRIKE Side mirror set Both drivers and passengers side mirrors Pro Fit mounts for the goofy looking D shaped with a channel roll cage will not fit round cages We test fitted these on our defender with the OEM flip glass windshield, there is enough room for the bracket to mount and the windshield to seal as it should. Features: Adaptive 360 Bracket Rotation: Will accommodate any angle roll cage pillar & provide optimal viewing position, so you can mount it high or low and adjust to perfect position every time Full Breakaway Geometry: Designed to break away during impacts to prevent damage Convex mirrors more than double your field of rear view High-Impact ABS Plastic Housing: Resists damage Ball Socket Joint: Provides a broad range of viewing angles Heavy-Duty Steel Mounting Clamp: Low mass design provides maximum strength and durability Convex Mirror Surface: provides wider viewing ranger and image stabilization Shatter Resistant Safety Glass Position Tension Adjustment Bolt: Always be able to keep it tight as new UNLIMITED LIFETIME WARRANTY CANAM Cage Styles Defender: Pro Fit Cage Maverick Trail/Sport: Pro Fit Cage OG Maverick/Commander: Round 2.0” Part number 18093
New Genuine OEM 4 Gallon polypropylene injected storage bin Great for storing ropes, tow straps, and winch accessories Easy install (takes just a few minutes) Part number 715003399- OUT OF STOCK
Aftermarket Four wheel drive servo motor. This is what engages the sliding collar putting power to the front differential. Part number 715900614 420891087 415129174 
Brand New OEM Helix Cam. Fits all non-turbo Maverick and Maverick MAX from 20013-2018. Also fits 2018+ Commander 1000R & Commander MAX 1000R Part number 420280474
Wind deflector mounting kit with hardware. Fits Outlander Renegade & DS450. For use with OEM wind deflectors This is just the mounting kit. Part number 715001378 No wind deflectors included.
New Genuine OEM Fits G2 machines from 2012-2018 Perfect for plowing snow or hauling heavy loads Improves handling 13.75" long with a I.D of 2" Part number 715003199
Rugged wheels spacers are made from T6061 aluminum alloy and are precisely CNC machined for accurate dimensions. Spacers can be direct bolt on and can use OEM studs. If you are looking to widen the stance of your machine, clear larger tires or get some new wheels. These spacers are just what you need. These spacers are sold as a pair. Two inch thick The bolt pattern is 4x137mm M10 studs Part number PAWS-1037
Brand New Genuine OEM head light For G2L. This housing is for both the high and low beams on a G2L model. The lens is roughly Five inches across. 710003900 If you have steel racks on a 2015 or newer Can Am ATV you have a G2L. New in package. Comes as pictured. This will not fit G2 or G1 regular Outlanders.
Brand New Genuine OEM Can-am Inner Cover Air Guide Clutch backing plate, this is the part that is against the engine and gearbox on most every can-am v twin. 13 Bolt design allows for better sealing We recommend adding anti seize thread lubricant when installing your cvt cover bolts. Old Part Number 420611409, 420611408 Current Part Number 420612304
New OEM Can Am Factory Helix If you are unsure about fitment, contact us. We are here to help! Current Number 420280472 Old part numbers: 420280193 420280198 420280470
Raised horn only. Raises the engine air intake for your G2 Outlander. OEM number 715002518
800/1000 Top end Gasket set Includes: 2 Head Gaskets 2 Cylinder Base Gaskets 2 Valve Cover Gaskets 2 Exhaust port crush gaskets 2 Intake Manifold Seals 8 valve seals Various O rings for fuel injectors, coolant fittings etc.. Moose gaskets are made to the same high quality standards as OEM. Part number 0934-3017
Features:
Cable adapter and fasteners constructed of highest quality stainless steel
Gold anodized aluminum throttle lever can be operated with one finger for safer side hilling
Safety features include rubber accordion boot (keeps moisture out of cable housing) and safety pin (locks left throttle from unwanted use)
Kit includes all hardware, allen wrenches and instructions for installation in approximately 20 minutes
Part Number 12-71042
Brand Number: 007-1011A
Can Am Outlander Renegade Power Steering Pitman Arm Will work on 2012-2017 500 650 800 1000 Gen 2 machines Part numbers 703500785 703500812
Can Am OEM non power steering stem for G1 Outlander and Renegade 500 650 800HO 800R 2006-2012 Will only work with non power steering bikes Brand New OEM Part number 709400971
Full rear mesh screen reduces windshield backdraft for added cabin comfort. Installs quick and easily on roll cage. Large white Can-Am logo on black mesh. Will not work on XMR models Part number 715006701
EPI heavy duty rear springs. 25% stiffer than factory springs. 250# Rate Great if you haul or have added weight with passenger or agricultural attachment. These ride very well when paired with the FOX shocks. Fits: G2 Outlander/Renegade shocks Part number WE325121
EPI heavy duty front springs. 25% stiffer than factory springs. Great if you haul or have added weight with a snow plow. These ride very well when paired with the FOX shocks. Fits: G2 Outlander/Renegade shocks that have 2 inch shock bodies
SHIPS FREE TO THE LOWER 48 STATES Black and Yellow wrap around wind deflector set with mounting kit. This is not sunburst yellow, this is the older yellow. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715000525 & 715001378
New Genuine OEM Robust injected-polypropylene construction allows for the right fit and easy installation Adjustable unit safely holds smartphones or small tablets with a length or width measuring between 2.9" (7.5 cm) and 5.1" (13.0 cm) with or without protective case Integrated storage 0.6 Gal Guiding wire grooves to pass charging cable through the lid Possibility of relocating 12V power outlet or installing USB outlet in storage compartment Not compatible with windshields and Snorkel Kit
New OEM Can Am Factory Helix If you are unsure about fitment, contact us. We are here to help! Current Number 420280701 Replaces 420280700
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.