NEW Wiring Harness Plug. New short wiring harness for rear tail lights Will need to be wired in to work. This plugs in to Tail light part number 710001645
Can Am Outlander Renegade Front U Joint These are found on the front prop shaft of G1 ATV’s and front drive shaft of Commander and Maverick (non X3/Sport/Trail) Also used on the 400 rear drive shaft 22mm caps. This is a new OEM part Replaces Part numbers: 703000023 703500814 703500607 703500135 703500002 703000024 715900183 715900325
20 Spline Yoke Fits: XMR 1000, Maverick and ’14 & newer Commander style Rear differentials. You will need a wear ring if you are using this on the differential side of the shaft. These yokes are made to very tight tolerances, if you are not careful when installing these you can damage the yoke or your pinion shaft. We recommend you take your time and clean the pinion gear before installing. —Great for custom applications— Uses Factory size U joint (398 at the auto parts store) Part numbers 715900271
OEM Air Filter for Gen 1 Outlander and Renegades. Fits 500, 650, and NON-R 800 engines, from 2006 - 2012. Comes as Pictured.
NEW Chrome Conical Taper M10 Lug Nut Set of 16 M10x1.25 thread size 60 Degree taper 14mm Hex head size, great for use with aftermarket wheels where socket space is a concern These will work on every Canam ATV since 2006 and most every Canam sxs Will not fit the Maverick X3 12mm wheel studs. Part numbers: 57-94121, ALUG14BX
One spark plug boot, this is used on many applications 2020 and older, if you are unsure on fitment, please contact us.
Part number 420265248
Replaces 710000041 and 420265240
Can-Am Rear Transmission Seal. Fits Large Gear Boxes, Standard and Low Ratio. Brand New OEM Seal OUTPUT SHAFT SEAL found on rear of gearbox, just in front of the rear driveshaft. This is the seal that goes on the rear, where the rear driveshaft goes out to the rear differential. If you are unsure if this is correct, please measure your current seal. If you get close to these specs it should work, the other option is much smaller in outer diameter. 72mm outer diameter 35mm inner diameter Current part number: 420831955 420831956
EPI Lower Ball Joint Fits: G1 Outlanders 400 500 650 800 Replaces OEM: 706200444 This style of ball joint bolts to the lower control arm. If you are unsure of fitment, please ask! 2006 - 2014 Can-Am Outlander 400 2007 - 2012 Can-Am Outlander 500 2008 - 2012 Can-Am Outlander 650 2006 - 2011 Can-Am Outlander 800 2006 - 2013 Can-Am Outlander Max 400 2007 - 2013 Can-Am Outlander Max 500 2007 - 2012 Can-Am Outlander Max 650 2006 - 2012 Can-Am Outlander Max 800
New OEM Secondary Clutch Outer Bearing
Current Part Number 420932421
Replaces 420932426 and 711932426
52mm Outer Diameter
25mm Inner Diameter
15mm Thick
New OEM Gasket Will fit the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R
Can-am Oem Primary Clutch Bolt M14X1.5X153.5 2015-2017 Maverick 1000R TURBO This is the larger style primary bolt found on turbo 1000R Vtwin Maverick applications. 420841092 420841091
New Genuine OEM Handlebar Wind Deflector. Part number 715006117
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.