Shop

  • Can Am OEM parts.

    Spring and Spring Cup set, two springs and two spring cups.

    These are the little parts that go flying across the shop floor when you open up your Can Am factory primary clutch.

    These parts are what helps give your machine engine braking.

    Part numbers: 420229577 420239134

  • SHIPS FREE TO THE LOWER 48 STATES Fits all 500, 650, 800, 800R, 570, 850, 1000, 1000R and 1000R turbo Mavericks Outlanders, Renegades, and 2020 & Prior Commanders. Replaces OEM part numbers 715000302, 422280360, 715900212, and 422280364. This will not fit: Defenders, Maverick X3 or Maverick Sport/Trail World’s Best Belt Line
    • Latest generation heavy-duty, high-twist Aramid Fiber cord for HIGH HORSEPOWER TENSILE LOAD requirements. Making it the strongest belt on the market.
    • Highest shock load rating to date being able to withstand the power of the 400hp machines.
    • Increased top cog pressure load design that increases sidewall rigidity, prevents top cog bowing, but still allows for increased rotational flexibility.
    • Bottom cog uses HIGH MODULOUS RUBBER COMPOUND (BZX1) for better heat resistance and heat dissipation.
    • Bottom cog is impregnated with short Aramid Fibers for better belt-to-sheave adhesion and reduced overall belt temperature.
    • Latest bottom cog design for greater rotational efficiency at full shift.
    • Precision ground sidewall angle (SCUFFING) for smooth engagement, increased power transfer and lower operating belt temperature.
    • Aramid Fiber cord, versus polyester, wraps over bottom cogs for increased bottom cog strength.
    • Increased cord pop-out resistance.
    This belt is for the rider / racer that is looking for the latest in technology and proven performance. Made in JAPAN. WBB302
  • Red wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715003811 & 715001378

  • Top End Gasket Kit, 93mm Bore, .018″ MLS Cylinder Head Gasket

    Big bore GASKET KIT  for 650/800 based engines.

    MLS (Muti Layer Steel) Cometic head gaskets and steel base gaskets, OEM paper base gaskets are recommended as the steel base gaskets require the surface to be perfect.

  • Blue wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715003814 & 715001378
  • New Genuine OEM power steering stem bellow for Outlander and Renegade. This will only fit power steering (DPS) models. Will not work on NON power steering bikes. Will come as pictured. Part number:  709400674
  • Brand New Genuine OEM head light For G2L. This housing is for both the high and low beams on a G2L model. The lens is roughly Five inches across. 710003900 If you have steel racks on a 2015 or newer Can Am ATV you have a G2L. New in package. Comes as pictured. This will not fit G2 or G1 regular Outlanders.
  • Part Number 715008101
    Molded heavy-duty aluminum mirror.
    Stays in place on rough trails.
    Ball-joint design for steady multi-angle adjustment and outstanding vision.
    Use with or without any BRP roof, BRP windshield or BRP doors.
    Fits either side.
    Sold individually.

  • OUT OF STOCK
    NEW OEM Can-Am Maverick X3 and X3 MAX Left Sway Bar End Link (Also called LH Ball Joint) Fits Left Front on Can-Am Maverick X3 and X3 MAX’s. Comes as Pictured.
  • New seat latch for 2012+ Renegade 500 570 800R 850 1000 1000R. Gen 2 Style. Will not work on Outlander seats. Will not work on G1 Renegade seats. Part number 708000914
  • This model type is a rubber O.D. seal with two sealing lips. The main sealing lip is spring loaded. This is a two-way seal, which means that it can retain lubricant and exclude contaminants simultaneously Canam Vtwin crankshaft main seal. Replaces OEM number 420631933 This seal is pressed into the PTO cover on v-twin's Unsure on fitment? Just measure you seal. 52mm Outer Diameter 34mm Inner Diameter 8mm Thick
  • Gen 2 Outlander seat latch Will not work on renegade seats Will come as pictured
  • OUT OF STOCK

    OEM Air Filter for Gen 1 Outlander and Renegades. Larger style air filter found on 800R machines. OEM part number: 707800288

  • OEM Air Filter for Gen 1 Outlander and Renegades. Fits 500, 650, and NON-R 800 engines, from 2006 - 2012. Comes as Pictured.
  • OEM CVT intake breather P/N 707000777 Will work on 2006 to 2011 can-am v-twins(500,650,800) and 2012 500/650 800MAX Please understand 2012 800 Outlanders are G2 and 2012 Outlander Max 800 are G1 If you are unsure on fitment, please ask us!
  • Brand New Genuine OEM Start/Stop Switch

    Will come as pictured

    Works on many V-twin ATV’s Renegades and Outlanders

    Will not work on 400’s

    Please look at the plug style on your current switch. The buttons may be arranged differently than the switch you are replacing.

    We have found this switch will work on all V-twins DPS or non DPS 2006 to 2015

    Current Part number: 703500920 Replaces: 710003062 710002883 710003039 710004041

  • NEW Genuine OEM Fuel/Gas Cap Fits most every Can-am ATV Renegade or Outlander Part Number: 513033025
  • Cam-Am Maverick Rear Differential Pinion Gear Fits 2013-2018 Maverick Turbo or non turbo Will not fit X3/Sport/Trail Models Comes with Pinion and Bearings Part Number: 703500867
  • Can Am Outlander Renegade Power Steering Pitman Arm Will work on 2012-2017 500 650 800 1000 Gen 2 machines Part numbers 703500785 703500812
  • Spicer Brand U joint for front drive shafts
    Fits: G1 Renegade and Outlander . Also works on Outlander 400 Rear shafts.
    Maverick/Commander front driveshafts

    Will not fit: Maverick X3/Sport/Trail or Defender

    Includes clips, and grease fitting.

    Pro tip: Install grease fitting before pressing in u joint.
    Install u joint in a manner where you can still grease the joint in chassis.

    Replaces OEM : 715900325 703000023 703000024 703500002 703500135 703500607 703500814

  • Cast Aluminum Valve cover set with Stainless bolts. Replaces your factory plastic valve covers on any can-am V-twin ATV or UTV 500/570/650/800/850/1000/1000R Replaces OE Numbers: 420610390 420610394 420610393 420610395
  • OUT OF STOCK
    New OEM Differential Pinion Oil Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: Gen 1 Front and Rear Diffs 2012-18 Outlander and Renegade Front and Rear Early Commander Rear All Maverick and Commander Front WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL or 2019 and newer Measurements: 70mm outside diameter and 37mm inside diameter Part number 705401615
  • Canam CVT Cover Kit Commander/Maverick 1000R

    Please look at pictures to verify fitment.

    This outer cover has two breather holes, one in front of the primary, one on the secondary.

    This outer cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather.

    Please look at pictures to verify fitment.

    Fits:
    Commander 1000R two seat 2018-2020
    Commander 1000R MAX four seat 2018
    Maverick 1000R two seat 2014-2018
    Maverick 1000R MAX four seat 2014-2018

    Will not fit:
    2015-2018 Maverick 1000R Turbo
    2017-2018 Maverick 1000R XMR

    Inner cover 420612304
    Outer cover 420212286
    13 Hex head CVT housing bolts 420440568
    Gasket 420430126
    O-rings – 420430407 and 420631087
    Hex Bolts – 420440207
    Also has a nut and washer – 232561434, 224061121
    Nylon drain plug and clamp

     

  • Can Am 2016 2017 Maverick Turbo Brown Fuel Injector Genuine OEM Part Part number: 420274255
  • OUT OF STOCK
    Brand New Moose Utility left or right rear axle Will fit CAN AM Maverick 1000 2013-2015 Low profile stainless steel clamps Engineered in the USA Part Number: 0214-1145 Replaces OE Number: 705501948 705502356
  • Part Number 0934-4824 Fits: 2006-2012 G1 800HO or 800R Outlander/Renegade Complete Engine Gasket kit made by Moose Racing Gasket kit
  • CVTech Primary Clutch Holding tool. Very nice tool for torquing nut on the clutch or the bolt holding clutch on to the crankshaft taper. 0155-1018 Part number
  • EPI Bushing Kit, steel inner, plastic outer bushings and shims
    Fits: G2 Canam ATV’s Outlander or Renegade
    Defender and Commander
    If you are unsure on fitment, please contact us before purchasing!
    Exact replacement components to return your suspension to like-new condition
    Kits are sold per A-arm
    EPI Part Number: WE341052
    P/U Part Number: 0430-1029
    Replaces OEM Part Numbers: 703500875 706202088 706202089 706202133
  • SHIPS FREE TO THE LOWER 48 SATES Can-am 2013 1000R Maverick Commander style CVT covers. This is the 13 bolt cover set. Popular for aftermarket clutch set ups. Only one breather hole in front of the primary clutch works on non Turbo Machines This kit will keep the water out! Comes with: 2013 Maverick 1000R covers inner and outer. CVT Cover Gasket CVT plug PTO O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part Numbers: 420612312 420612313 420611407 420440568

  • CVT cover set for Turbo V twin Mavericks 1000R Best to pull your cover and visually inspect it for fitment. This cover has two holes over the primary clutch and one over the secondary. If you are unsure on fitment, please contact us! Fits: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR Will not fit Maverick X3 Comes with: Maverick Turbo covers inner and outer. CVT Cover Gasket CVT plug PTO O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part numbers 420212285 420611407 420440568
  • Differential Vent Tube 8mm diameter Part number 705501584
  • OEM Number 705501557 Pinion seal found on G2 800 850 1000 1000R XMR rear differentials 38mm Inner Diameter 80mm Outer Diameter 10mm wide
  • Fits G2 ATV’s Outlander or Renegade 500 450 570 650 800 850 1000 1000R

    Shift Arm Base Upgrade

    Replaces OEM 707003054 707000971 707002439

    USA made Made from 6061 T6 Aluminum (aircraft grade)

    This plate does not require any additional hardware, use a zip tie to retain the wire harness or vent lines running near it.

  • Early Commander Steering Rack Great Value for replacing a worn out rack. Moose Number 0430-1071 Replaces OEM 709401185 Fits 2011-2014 Commander 800/1000 Be sure to center rack before installing your steering shaft.
  • NEW Can Am OEM Cam Timing Tool For holding the cam in place for timing and tightening camshaft sprocket bolts For easy installation of new timing chains or just setting timing. OEM Number 529036268 replaces 529036231
  • NEW OEM CVT cover with heat shield installed from factory

    Fits:
    Maverick 1000R two seat 2013-2014
    Commander 1000 MAX four seat 2014-2016
    Commander 800R MAX four seat 2017-2019

    ONE Breather hole in front of Primary clutch.

    This is the cover with the most room. Common to use this on newer V-twin 1000R Mavericks with aftermarket clutches that do not require the extra breathers.

    Please match this up with yours before purchasing.

    Part number 420612318

    Replaces 420612312 420612313  715900257 420975052