New Genuine OEM wheel stud Works on 2017-2020 Maverick X3 machines Part number 250300625
250 900 0951-1037
SHIPS FREE TO THE LOWER 48 STATES Can-am Commander style CVT cover set. This is the 13 bolt cover set, with attached reflective heat foam. Fits: Commander 800R two seat 2011-2020 Commander 800R MAX four seat 2016 Commander 1000 two seat 2011-2017 This kit will keep the water out! Comes with: Commander covers inner and outer. CVT Cover Gasket CVT Drain plug and Clamp Engine O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part numbers: 420612472 715900200 420611407 420440568 420430408 420631088 420430126 420440567 420440568
Standard Differential Pinion Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: G1 Front and Rear Differentials 2012-18 Outlander and Renegade Front and Rear Differentials All Commander Front Differentials 2011-13 Commander Rear Differentials 2013-18 Maverick Front Differentials (non X3/trail/sport) WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL Measurements are shown: 70mm outside and 37mm inside Replaces part numbers 705401481 and 705401615
Can Am Trailing Arm Nut Removal Tool, Spanner Socket
Part # 529035925 Brand New, We recommend using heat on the nut as well.
DO NOT use an impact gun on the nut as you risk breaking the tool. We have done many with a large breaker bar.
Six Weights 14 gram each for CVtech Trailbloc Primary Part numbers: 0935-2005 or 0901-7105
Can-Am 703500865 Secondary Clutch Driven Pulley Stud Nut Screw Kit Secondary Stud/Nut Kit M10x136mm You will need to reuse your washer. This kit will work on every Vtwin ATV factory driven (secondary) clutch (pulley) Also fits Commander driven clutch Will work on non QRS Maverick driven clutch If you have fitment questions, please contact us, we are here to help. Part numbers: 703500865 420441900 420242097 420242402
CVtech Slider Shoe HD set of three for billet plate 0930-2004
neapco Brand U joint for front drive shafts These U joints are made in Italy, please do not confuse these with the sub-grade china made u joints. Fits: G1 Renegade and Outlander . Also works on Outlander 400 Rear shafts. Maverick/Commander front driveshafts Will not fit: Maverick X3/Sport/Trail or Defender Includes clips, and grease fitting. Pro tip: Install grease fitting before pressing in u joint. Install u joint in a manner where you can still grease the joint in chassis. Replaces OEM : 715900325 703000023 703000024 703500002 703500135 703500607 703500814
NEW OEM Timing Chain Housing O ring Order two per Vtwin engine Part number 420430370 420430373
Can-am OEM PTO and crankcase bearing install and removal tools. These are the OEM tools required to install bearings in the bottom end of your Can-am V twin engine correctly. Part Numbers 529035917 & 529036032
New OEM 18 spline yoke with fully machined surface This is the forward most yoke on the rear driveshaft of G1 ATVs Fits years 2006 and newer, 450 and larger machines, if you are unsure on fitment please contact us. Use with 398 type U joints Current Part number 715900101 Replaces 705500371 705501372
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.