New Genuine OEM Can-am radiator cooling fan assembly Fits on some G2 Outlander/Renegade and OG Maverick, please check part numbers for fitment. Will not fit XMR Outlander’s Current part number 709200563 Old part numbers 709200317 709200488
New Genuine OEM Can-am radiator cooling fan assembly Fits on some G2 Outlander/Renegade and OG Maverick, please check part numbers for fitment. Will not fit XMR Outlander’s Current part number 709200564 Old part number 709200309 709200462
NEW OEM Can Am ATV Catalyst Gray Handlebar Wind Deflector Kit With Mounting Brackets. Part Numbers 709402799 709402800 715001378.
Canam Outer CVT Cover Commander/Maverick 1000R Please look at pictures to verify fitment. This has two breather holes, one in front of the primary, one on the secondary. This cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather. Fits: Commander 1000R two seat 2018-2020 Commander 1000R MAX four seat 2018 Maverick 1000R two seat 2014-2018 Maverick 1000R MAX four seat 2014-2018 Will not fit: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR If you have questions please ask! Current Part number 420212286 replaces 420612319 420612470
FREE SHIPPING TO THE LOWER 48 STATES New OEM cover Will fit the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R Old part number 420212502 New part number 420212500 O-ring and drain plug cap are NOT included
NEW OEM Wheel Center Cap Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
NEW OEM Wheel Center Cap Set of Four Commander/Defender Style Please understand there are different styles of caps. This style fits on to the wheel not the hub. The last picture shows this installed. Please look for the part number on your other caps to verify fitment. Part number 705401541
Brand New Genuine OEM Radiator
Fits 2011-2020 Commander and 2013-2018 Maverick (non X3/Sport/Trail)
Current Part Number 709200395 Replaces Part Number 709200252
Can Am Commander or Maverick Wheel Stud M10 Stud diameter 27.5mm spacing for brake rotor Part number 250300060 replaces 250300051
NEW OEM 2014-2019 Commander 800R 1000 1000R Rear Differential This **WILL NOT** work for 2011-2013 Commanders This **WILL NOT** work for with Commanders Equipped with a LOCKING REAR DIFFERENTIAL. This **WILL NOT** work for 2020 Commanders 705502517 705501804 705502096 705502331
New Genuine OEM handle for your commander cargo box. Will work on the upper tail gate or lower cargo door Part number 708300398
Can Am Commander seat bottom cover Solid Black in color Brand new OEM Part Number: 708000674 708001103
New Genuine OEM CVT Cover Drain Plug This clamps on to your outer cvt cover. Part number 707001179
NEW OEM CVT cover with heat shield installed from factory
Fits:
Maverick 1000R two seat 2013-2014
Commander 1000 MAX four seat 2014-2016
Commander 800R MAX four seat 2017-2019ONE Breather hole in front of Primary clutch.
This is the cover with the most room. Common to use this on newer V-twin 1000R Mavericks with aftermarket clutches that do not require the extra breathers.
Please match this up with yours before purchasing.
Part number 420612318
Replaces 420612312 420612313 715900257 420975052
Brand New Genuine OEM 13 Bolt CVT Cover Gasket
Works on 7 bolt covers also.
Part number 420430127 replaces: 420430126 420430124 420430123 420430120
New OEM Cap Fits on cover 420212500 Comes with 0-ring 420250050 Fits the following machines 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R
New OEM Gasket Will fit the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R
This part is made for 2016-current Outlander and Renegade 1000R’s, but would be perfect for a machine with a larger aftermarket clutch or any machine using a Maverick Primary, as this cover has more room inside for the stud.
Comes with the NEW UPDATED 420612310 cover
This kit will keep the water out!
Comes with:
2016-current Outlander and Renegade 1000R’s covers inner and outer.
CVT Cover Gasket
CVT plug
PTO O-ring
Gear box O-ring
Inner CVT Bolts/Nut
13 Cover screwsPart numbers
420612316
420440568
420612304
420430408
420631088
420441311
420430126
707001179
SHIPS FREE TO THE LOWER 48 SATES Can-am 2013 1000R Maverick Commander style CVT covers. This is the 13 bolt cover set. Popular for aftermarket clutch set ups. Only one breather hole in front of the primary clutch works on non Turbo Machines This kit will keep the water out! Comes with: 2013 Maverick 1000R covers inner and outer. CVT Cover Gasket CVT plug PTO O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part Numbers: 420612312 420612313 420611407 420440568
Canam CVT Cover Kit Commander/Maverick 1000R
Please look at pictures to verify fitment.
This outer cover has two breather holes, one in front of the primary, one on the secondary.
This outer cover is the factory replacement for 420612319, some aftermarket clutches will not clear the new breather hole style you may need to modify this cover or backdate it to the 420612313 style with out the secondary breather.
Please look at pictures to verify fitment.
Fits:
Commander 1000R two seat 2018-2020
Commander 1000R MAX four seat 2018
Maverick 1000R two seat 2014-2018
Maverick 1000R MAX four seat 2014-2018Will not fit:
2015-2018 Maverick 1000R Turbo
2017-2018 Maverick 1000R XMRInner cover 420612304
Outer cover 420212286
13 Hex head CVT housing bolts 420440568
Gasket 420430126
O-rings – 420430407 and 420631087
Hex Bolts – 420440207
Also has a nut and washer – 232561434, 224061121
Nylon drain plug and clamp
SHIPS FREE TO THE LOWER 48 STATES Can-am Commander style CVT cover set. This is the 13 bolt cover set, with attached reflective heat foam. Fits: Commander 800R two seat 2011-2020 Commander 800R MAX four seat 2016 Commander 1000 two seat 2011-2017 This kit will keep the water out! Comes with: Commander covers inner and outer. CVT Cover Gasket CVT Drain plug and Clamp Engine O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part numbers: 420612472 715900200 420611407 420440568 420430408 420631088 420430126 420440567 420440568
NEW OEM CVT cover with heat shield installed from factory Fits: Maverick 1000R two seat 2013-2014 Commander 1000 MAX four seat 2014-2016 Commander 800R MAX four seat 2017-2019 ONE Breather hole in front of Primary clutch. This is the cover with the most room. Common to use this on newer V-twin 1000R Mavericks with aftermarket clutches that do not require the extra breathers. Inner cover 420611407 Outer cover 420212318 13 Hex head CVT housing bolts 420440568 Gasket 420430126 O-rings – 420430407 and 420631087 Hex Bolts – 420440207 Also has a nut and washer – 232561434, 224061121 Nylon drain plug and clamp
SHIPS FREE TO THE LOWER 48 SATES Can-am 13 bolt ATV CVT cover set. This will fit on any 2006-current v twin ATV, Renegade or Outlander, 500 650 800 or 1000. This cover will not clear primary clutches with studs (1000R applications) This is the kit many swap to, this kit will keep the water out! We recommend a light coat of thread lubricant on the cover screws, keeps the inserts from spinning. Comes with: XMR Clutch covers inner and outer. Center Rubber Gasket Drain plug with clamp PTO O-ring Hardware to attach inner cover to gearbox/engine Gear box O-ring 13 Cover screws (hex head style) Part Numbers: 420611397 420611390 420611391 420611393 420611407 420440568
CVT Rear Boot (the boot that connects to the exhaust side of the inner CVT cover plate. This is the updated part and will work on all G1 V-Twin ATV’s . This replaces 707000789, this newer style will not work on the xmr 2011-12 where the exhaust riser pipe meets the upper tube. Current Part Number 707001274
Can Am 2013+ G2 Outlander CVT Filter Base Part Number: 707001171 New OEM Will come as pictured
Brand New Genuine OEM Can-am Inner Cover Air Guide Clutch backing plate, this is the part that is against the engine and gearbox on most every can-am v twin. 13 Bolt design allows for better sealing We recommend adding anti seize thread lubricant when installing your cvt cover bolts. Old Part Number 420611409, 420611408 Current Part Number 420612304
Brand new Genuine OEM flexible CVT intake adaptor for Renegade, Outlander, Maverick, and Commander.
This replaces the thin rubber boot that comes on many early CanAm V-Twin models.
Very nice upgrade for a cracked CVT intake boot.
Current part number 707002585
Previous part numbers 707001467, 707001043, 707000719
SHIPS FREE TO THE LOWER 48 STATES OEM Outer CVT Cover 2013 Maverick 1000R ONE Breather hole in front of Primary clutch. This is the cover with the most room. Common to use this on newer Vtwin Mavericks with aftermarket clutches that do not require the extra breathers. Current Part Number: 420612313 replaces 420612312 Will not fit Maverick X3/Sport/Trail
Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 415129355 replaces 710002312
Magnetic button to cycle through displays on your dash/speedometer Please compare this to your original button Part number 710001473 replaces 710001417
Driven Pulley Extractor bolt for belt changes This spreads the secondary with the 708200686 adapter tool. Works with: Can Am Defender HD8 HD10 Part number 529036352
SHIPS FREE TO THE LOWER 48 STATES Brand NEW OEM Transmission Drive Belt OEM belts are the best choice for longevity and strength. Will fit: Defender HD8 HD10 Maverick Trail 800 Maverick X3 900HO (non turbo) Current Part number 422280656 Replaces 422280654
Can Am Maverick X3 Maverick Sport/Trail or Defender Belt change kit. M36x2.0 thread size works on all X3’s and Defenders Will not fit QRS clutches found on “OG” mavericks This is a OEM tool and bolt Spreader It is recommended to use a coin in between the bolt and the clutch to avoid marring up the clutch. The bolt has the correct T30 bit on one end to remove the cvt cover bolts with your 13mm wrench/socket. We highly suggest a ratchet and T30 socket on a 3 inch extension to speed up the job. Part number 708200720 and 529000088 This set works in place of 708200686
New OEM Defender, Maverick Trail/Sport Clutch Cover Kit Will fit the following 2016-2019 Defender HD8 and HD10 2018-2019 Maverick Trail 800R and 1000R 2019 Maverick Sport 1000R Kit includes Outer Cover 420212500 Inner Cover 420212600 Gasket 420450400 O-ring set 420450431/420430408 Bolt set 420441575 Drain plug with O-ring 420441820
Outlander Renegade Commander Maverick Differential Drain Plug Brand New Genuine OEM Drain Plug 9.9 mm outside diameter Will fit on some fronts and rears be sure yours looks like this one and measures the same Part Number 705500894
Brand New Genuine OEM Fill Level Plug Be sure that yours looks the same due to other styles for front or rear differential from different years M14 diameter 1.5 thread pitch Part number 705500504
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.