Shop

  • New Genuine OEM  Handlebar End Cap Part number 709400449
  • New OEM Grey RFID Key for Ball Style Ignitions Fits 2017-2018 Maverick X3’s, Outlanders, and Renegades. Make sure you have this style ignition. Key will have to be programmed using BUDS (Local Dealer) Part Number: 710004964

  • OUT OF STOCK
    Genuine Can Am 800R/1000 Green Fuel Injector OEM Part Part number: 420874833 replaces 420874830
  • New OEM Can Am Outlander, Renegade 1000R XXC Gearbox

    Current Part Number- 420686568
    Previous Part Numbers- 420686565 NEW OEM Canam Part

    NOT A REBUILD, ALL NEW Brand New In The Box

    Fits- Maverick 1000R, Commander 1000 or 800, Outlander 1000 2012-2014, all Outlander XMR 1000/1000R, Renegade 1000/1000R.
    If unsure of fitment, please contact us. We will be happy to help!

    These ratios are published in the 2019 Service manual, we have not confirmed these to be accurate.
    Ring and Pinon Gears 37/15=2.467
    Intermediate 45/40=1.125
    High Range 36/27=1.333
    Low Range 46/17=2.706
    Reverse 34/12=2.833

    Overall Gear Ratios:
    High Range 3.700
    Low Range 7.510
    Reverse Range 7.863

  • NEW Genuine Can-am Rear Prop Shaft for G1 STD single seat machines WILL NOT FIT MAX. This will work with 2006-2011 500 650 800 800R, Outlander or Renegade and 2012 Outlander 500 650 or Renegade 500. The picture is what you will get. We install the wear ring and deflector ring for fast install. Current Part number: 703500801 Previous numbers: 703500767 703500719 705500816 703500704
  • Brand New Genuine OEM ignition key switch for Outlander G1 or Renegade G1 Does not require BUDS tuning to swap out, your current DESS key will turn in this. The ignition switch is just a reader of the coded key. Key sold separately. Old Part Numbers 710000728 and 710001421

  • OEM O ring this seals the gearbox oil, it is installed on the rear through shaft bearing housing. Roughly two inches in diameter. Part Number 420230306 replaces 420230305
  • SHIPS FREE TO THE LOWER 48 STATES NEW OEM Gearbox Angle Rotation Sensor (gear position sensor) This is used on the Large Gearbox Part Number 420266168

  • Gearbox Shift Shaft Seal 28mm OD 12mm ID 7mm Thick Part numbers: 711250450 420250450
  • OEM Radiator Relocation Kit. Part number 715004943 This moves your radiator (not included) up on where your front rack is currently. The front rack will be removed leaving you with a clean looking machine. This is a must for tackling extreme mud conditions where you risk clogging your radiator and overheating your engine! This is a factory OEM kit, not an aftermarket kit, instructions are provided on BRP's website. Coolant overflow tank is included, hoses ect.. You will not find a better fit and finish kit on the market. There is drilling and cutting involved. This is all covered in great detail. Roughly 2.5 hour install time This kit fits G3L models check out the pictured fitment chart if you are unsure what you ride.
  • G3L Snorkel Kit for 2023+ 500 700 HD5 HD7 Outlander Current Part number 715005073 All hardware is included, instructions are online. We can email them if you have trouble finding them. Please note you will need to trim some parts on your machine, to install this kit. This kit raises the engine intake, CVT intake and CVT exhaust. This is a must for an extreme mud rider
  • NEW OEM 450 and 570 Outlander keyed ignition switch, and matched keys Two position switch, non DESS Style. This is just on and off. No headlight control. Used on 2017 and newer G2L ATV’s Comes with main key and back up key These are not the electronic black keys, these are cut keys to match the ignition switch Part Number 710007864 replaces 710005153

  • OEM Number 705501557 Pinion seal found on G2 800 850 1000 1000R XMR rear differentials 38mm Inner Diameter 80mm Outer Diameter 10mm wide
  • Brand NEW Genuine OEM Upper Ball Joint For G2 ATV , 2012-Current Commander and Maverick Will not Fit Maverick X3/Trail/Sport Does NOT include Circlip, Cotter Pin, Hardened Washer, or M12 Nut. Be sure to save your old ones Part Numbers: 706200741 706201370 706201394 706202044
  • Dash/Speedometer for specific G2 500/650/800/1000R bikes. Please ask to confirm fitment if you are unsure, there are a few dashes that look the same. This is the factory Gauge/Screen for some 2018-20 G2 models. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. It will display 0 miles, please record your current miles for your records. Current Part Number 710005599
  • Dash/Speedometer for G2 500/650/800/1000 bikes. This is the factory Gauge/Screen. for 2014-18 G2  models. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. It will display 0 miles, please record your current miles for your records. Current Part Number 710003923 Replaces Part Number 710003454
  • New OEM Genuine BRP G2 Outlander RIGHT side cargo support bracket Old part number 705005038 New part number 705006998
  • NEW Genuine OEM Can-am Rear Prop Shaft for 2012-14 Outlander 1000 NON XMR NON MAX Or 2012-18 Renegade 1000/1000R. NON XMR Comes with protector ring installed. Wear ring is not needed or included on this shaft. The yoke is simply machined larger in outer diameter. If you have any doubts about fitment, please count your splines on your gearbox output shaft and the pinion shaft on your differential. This shaft is for 20 spline gearbox output shaft and 18 spline rear differential. Current Part number: 703500991 Replaces Part Numbers: 703500929 703500862 705501413 705501258

  • OUT OF STOCK
    SHIPS FREE TO THE LOWER 48 STATES Dash swap kit for G2 2012-17 Can-Am ATV’s. WILL NOT FUNCTION 100% on the L models 400/450/500/570 Please note some 2012-13 models may show "dps overheat" This is the factory gauge from the XT-P models. Dual Analog Style read outs. This has the built in coolant temperature gauge, a must for riding in extreme conditions! Brand new dash with 0 miles the Engine hours stay with the ecu, be sure to record your miles for your own records. Dash is set from the factory in KM/H and will require BUDS programming to change it to MPH  This can be done at your local dealer or we offer this free of charge with purchase if you would like to stop by or you can send us your ecu, dash, key and DPS (power steering) if factory equipped. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Part Number: 710005075 705006322
  • Raised horn only. Raises the engine air intake for your G2 Outlander. OEM number 715002518
  • New OEM bushing kit for Commander, G2 Renegade and G2 Outlander This is a genuine OEM kit with bushings and wear plate. Order two (2) per arm. One kit does one attachment point. Part numbers: 706202088 706202089 706202133 703500875
  • New OEM Genuine BRP G2 Outlander LEFT side cargo support bracket Old part number 705005037 New part number 705006997
  • OUT OF STOCK

    OEM Radiator Relocate Kit. This moves your radiator (not included) up on your front rack. This is a must for tackling extreme mud conditions where you risk clogging your radiator and overheating your engine! Allows for easy servicing (cleaning) This is a factory OEM kit, not an aftermarket kit, instructions are provided on BRP’s website. Coolant overflow tank is included, hoses ect.. You will not find a better fit and finish kit on the market. There is drilling and cutting involved. This is all covered in great detail. Roughly 3.5 hour install time This kit fits G2 and G2L models check out the pictured fitment chart if you are unsure what you ride. The white “can-am” is a protective film that can be removed with a small pick. Part number 715001930

  • New Genuine OEM power steering stem bellow for Outlander and Renegade. This will only fit power steering (DPS) models. Will not work on NON power steering bikes. Will come as pictured. Part number:  709400674