Brand New Genuine OEM head light For G2L. This housing is for both the high and low beams on a G2L model. The lens is roughly Five inches across. 710003900 If you have steel racks on a 2015 or newer Can Am ATV you have a G2L. New in package. Comes as pictured. This will not fit G2 or G1 regular Outlanders.
OEM Air Filter for Gen 1 Outlander and Renegades. Larger style air filter found on 800R machines. OEM part number: 707800288
Brand NEW OEM Tail Light without light bulb and light bulb socket Found in G2 Renegade and Outlander, Commander and Maverick. Fits left or right. Part Number 710001645
There are a few options for kits, please verify your differential uses this style of gears before ordering!
This will only fit six mounting hole differentials.
Late G1 Early G2 Standard Rear Differential Ring 36t and Pinion 10t gear set Pinion bolt size is M10, this may be different than what you are replacing.
OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. This kit should be installed by an experienced technician.
Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4? (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16" (14mm) The pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
- OUT OF STOCK
New Genuine OEM fuel cap 709000868 Fits 2016-2020 Defender HD5, HD8, and HD10 2017-2020 Defender Max HD8 and HD10 2018-2020 Maverick Trail 800R and 1000 2019-2020 Maverick Sport 1000 and 1000R 2019-2020 Maverick Sport Max 1000 and 1000R 2017-2020 Maverick X3 and Maverick X3 Max 
Moose Utility Division handlebars Replaces factory OEM handlebars 7/8? diameter standard size made from .083 steel tubing Pullback/Sweep: 4? Width: 32? Center Width: 5-1/2? Does not come with hand grips May fit other years or models Made in the U.S.A. Will come as pictured Replaces OEM Part Numbers: 709401240 709400877 709400292 Parts unlimited number: 0601-4379
New OEM Variator Gasket for Maverick X3 and X3 MAX Fits 2017+ Part Number: 420450405 Comes as pictured
Excellent quality replacement part Meets or exceeds OEM quality 2 required per vehicle Replaces oem number 709401134 EPI number WE315041 Fits : 800 Commander Std/DPS/XT 2013-19 800 Commander Max DPS 2017-19 1000 Commander Max Std/DPS/Ltd/XT 2014-19 1000 Commander Std/DPS/Ltd/XT/XT-P 2013-19 Commander E Std/XT/LSV/LSV SE (Electric) 2014-15
NEW OEM CVT cover with heat shield installed from factory
Fits:
Maverick 1000R two seat 2013-2014
Commander 1000 MAX four seat 2014-2016
Commander 800R MAX four seat 2017-2019ONE Breather hole in front of Primary clutch.
This is the cover with the most room. Common to use this on newer V-twin 1000R Mavericks with aftermarket clutches that do not require the extra breathers.
Please match this up with yours before purchasing.
Part number 420612318
Replaces 420612312 420612313 715900257 420975052
Can Am Outlander 500 650 piston ring set New Genuine OEM Kit is only for one piston Current part number 420684384 Old part number 420684114
SHIPS FREE TO THE LOWER 48 STATES Fits 2012-18 G2 atv’s with non reservoir shocks. 25% stiffer over stock springs, great alternative to lift pucks. Pair these with the fox shocks for a nice ride! WE325123 WE325121
New Genuine OEM filter Fits 2020 Heated cab models Made in the USA
Dual USB Power Outlet Kit A simple upgrade kit, plug and play Product Number: 219400510 replaces the existing 12v power outlet on your machine: 710001248
OEM Canam Projector High Beam projector head light assembly with 9005 bulb. Brand NEW! High quality HELLA brand made in Austria. Fits many models please ask if you are unsure! Part Number 710002525
All Balls complete module, retaining nut and gasket This fits many G2 model ATVs please contact us if you have fitment questions. Part number: 1009-0139 47-1024 Replaces OEM numbers: 709000287 709000758
New Demon Heavy Duty Axle Front Left Fits: G2 2012-2018 ATV Outlander/Renegade 500 570 650 800R 850 1000 1000R Part number PAXL-3070HD Replaces OEM 705400756 703500823 705401943 705401115 705401384 705401947 705401704 Through years of research and development Demon Powersports has developed an axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger. Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity. These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40° articulation over terrain on the inboard joint. The outboard joint can travel 0.5inches and swing from 45°-47° depending on the model. The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion. Trust in Demon Heavy Duty Axles to keep you riding!! • 15%-20% increase in diameter compared to regular axle • Inner cage made up of 4340 chromoly steel • Dual heat treated high strength chromoly steel shaft • Thermoplastic polyester elastomer (TPEE) Boot • 10%-15% increase in CV joint size compared to regular joints • Wider articulation angles • Dual plunge design prevents axle from binding • Packed with high load molybdenum grease Precision CNC machined • Can Fit 1.5”- 5” Bracket lift of particular brands/ All Portal Gear Lifts / 1.5”- 5” A-arms of particular brands • 1-year ltd warranty
Mohawk Dash for Can-Am Renegade Will work some 2021+ Renegades Clean way to hide custom snorkels Factory OEM part 705015170- OUT OF STOCK
New Genuine OEM Handlebar End Cap Part number 709400449 
NEW OEM Exhaust Muffler Gasket This slides on to the header pipe, then muffler slides over it. 2" outer diameter 1.77" inner diameter 1" wide Part number 707600430
OEM oring commonly used on distance ring on gearbox input shaft. 420631610 replaces 420631615
710004814 OEM switch Used on some 2016-19 Maverick Sport Maverick Trail Maverick X3 and Defender
New OEM Can Am Brake Switch Part Number: 705601250 Unsure on fitment? Please ask us we will help!
- OUT OF STOCK
New Genuine OEM G2 2017+ Outlander Steering Stem for DPS Part Number: 703501108 Old Part Number 709401750 Fits 2017+ Outlanders and 2018+ Renegades with DPS Comes as Pictured 
Drive Belt Can Am Fits: 2017-2020 Maverick X3 900HO Turbo R Turbo RR 2017-2020 Maverick Trail/Sport 800R, 1000, 1000R 2016-2020 Defender HD10/HD8
Replaces OEM # 422280651 / 417300383 / 422280654 / 422280652 Gates Part number 48R4289 If you have fitment questions, please ask, we are here to help.
IF YOUR MAVERICK HAS A REAR DRIVESHAFT (OG MAVERICK) THIS BELT WILL NOT FIT.
FEATURES AND BENEFITS
Designed for the most demanding, turbo-charged off-road CVT applications. With Gates proprietary materials and design, G-Force™ RedLine™ CVT belts handle extreme temperatures with excellent heat recovery, while maximizing load and torque capacity - making it one of the most efficient CVT belts currently on the market.- First on the market to utilize Ethylene Elastomer compound to address the needs of larger SxS and high-horsepower ORVs in tough riding conditions.
- Next-generation EE compound offers maximum transverse stiffness and heat resistance, resulting in higher load capacity, higher peak torque capacity, less “heat fade” and less speed loss.
- Delivers 75% greater dynamic axial stiffness on average, up to 50% lower speed losses and better recovery from temperatures up to +170°C (+338°F) without power loss.
- Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F).
- Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing.
- Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
DON’T BREAK YOUR BELT. BREAK IT IN.
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these steps to ensure the best performance and longest life from your G-Force™ belt.
1. Clean the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. Be sure your breather tubes are free of any belt material (broken belt material gets everywhere)
2. Install and Break It In. Perform two heat cycles (10-15 minutes each) at +27°C (+80°F) at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of +16°C (+60°F) or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Six Weights 21 gram each for CVtech Trailbloc Primary Part numbers: 0935-2054 or 0901-7118- OUT OF STOCK
Air Filter for G1 Outlander and Renegades. Replaces OEM 707800174 Fits 500, 650, and 800HO NON-R 800 engines, from 2006 – 2012. Bonded, two-layer .65" foam designed for maximum protection and airflow Coarse outer foam traps large particles while fine inner foam catches the finest dust With the precision pre-oiled air filter, there is no excess oil to rob horsepower, and no dry spots endangering your engine Made in the U.S.A. 
NEW Genuine OEM Fuel/Gas Cap Fits most every Can-am ATV Renegade or Outlander Part Number: 513033025
SHIPS FREE TO THE LOWER 48 STATES- LED dimmer facilitates reading temperature settings.
- 4 temperature settings with individual controls for thumb and grips.
- Returns to previous heat setting.
- One-touch shutdown.
- Wiring Harness (710004567) required for installation, on G2L and G2S (except 1000R and T category models) G2 Outlander does not require the harness.
- OUT OF STOCK
Brand new OEM left side rear view mirror. Mirror Will fit all CAN AM Outlander or Renegade models 2006+
New Demon Heavy Duty Axle Rear Left Fits: 2019+ ATV Outlander/Renegade 650 850 1000R Part number PAXL-3064HD Replaces OEM 705502710 705503025 705502712 Through years of research and development Demon Powersports has developed an axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger. Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity. These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40° articulation over terrain on the inboard joint. The outboard joint can travel 0.5inches and swing from 45°-47° depending on the model. The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion. Trust in Demon Heavy Duty Axles to keep you riding!! • 15%-20% increase in diameter compared to regular axle • Inner cage made up of 4340 chromoly steel • Dual heat treated high strength chromoly steel shaft • Thermoplastic polyester elastomer (TPEE) Boot • 10%-15% increase in CV joint size compared to regular joints • Wider articulation angles • Dual plunge design prevents axle from binding • Packed with high load molybdenum grease Precision CNC machined • Can Fit 1.5”- 5” Bracket lift of particular brands/ All Portal Gear Lifts / 1.5”- 5” A-arms of particular brands • 1-year ltd warranty
Outlander G2 2012+ Rear Storage Box Trunk Cover Door Will not fit G2L models. New OEM part 708300150
New OEM Can Am tool Designed to make adjusting your shift cable easy Comes with shift lever locking tool to hold the shift lever in neutral while adjusting cable Also comes with the shift plate locking tool which is screwed into the rear cylinder head and the other end locks the shift lever indicator on the gearbox in the correct place. Works on 2011-2020 Commander and Commander Max machines and 2013-2018 Maverick and Maverick Max machines Current part number 529036252 Click here for adjustment procedures
New Genuine OEM Fits 2011-2020 Commander and Commander Max 2013-2018 Maverick and Maverick Max Part number 707800327
New Genuine OEM Intake neck for Outlander 1000, Renegade 1000, Commander 1000 and Maverick 1000 Turbo Old part number 420267040 420267041 Current part number 420267042
NEW OEM BRP OIL PUMP
Part number 420256348 replaces 420256347
- OUT OF STOCK
New OEM Differential Pinion Oil Seal. Please check your wear ring, if that is grooved it is time to replace. Very easy to miss that and blame a new seal on a bad wear ring. Will fit: Gen 1 Front and Rear Diffs 2012-18 Outlander and Renegade Front and Rear Early Commander Rear All Maverick and Commander Front WILL NOT FIT G2 XMR 800/850/1000 REAR DIFFERENTIAL or 2019 and newer Measurements: 70mm outside diameter and 37mm inside diameter Part number 705401615
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.