Differential Vent Tube 8mm diameter Part number 705501584
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.5:1 compression ratio This is a ready to bolt on kit Fits: Commander 1000 ATV 1000/1000R Defender HD10 and DH9 Maverick Sport 1000 Please note this kit will not fit the SXS 1000R due to the lower compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420685242 420685248 420623568 420623566 420630210 420245436 420216351 420685244 420296774
New Aftermarket 1000/1000R Crankshaft with Connecting rods and bearings. No core needed, ready to install. *Will not fit Defender Maverick Sport/Trail* Replaces OE parts: 420219735 420219736 420217556 420217559 420641477 420641475 420233726
New Aftermarket 650/800 Crankshaft with Connecting rods and bearings. No core needed, ready to install. Replaces OE parts: 420219665 420217425 420217429 420641640 420641645 420233980 420219745 420219746 This will work with DPS equipped machines.
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.3 compression ratio This is a ready to bolt on kit, this will work with 800HO 800R and 650 engines. If you install this on a 650 you will need to have your ecu flashed or a inline tuner installed. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420296775 420685714 420613586 420296774 420216270 420845106 420630210
NEW Aftermarket Replacement Throttle Lever Assembly with 4x4 Switch. This fits all G1 Outlanders and Renegades, and G2 models with a throttle cable. Replaces Part Numbers: 707000595 709400186 707000369
Brand new aftermarket secondary clutch assembly This is found on many BRP ATVs. Please ask if you have fitment questions. Replaces OEM Part Part Numbers: 420280173 420280176 420280178 420932421 420280236 420280499 420245910 420245911 420220913 If your machine has a spring with pigtails you will need to use a spring without them as this aftermarket clutch does not have provisions for them. 420238176 OEM Black/Orange is a great substitute Installation Torque Specs: 45 ft·lb On the Secondary Bolt (red thread locker recommended, allow to set up overnight)
NEW AFTERMARKET STARTER SPRAG VTWIN Starter Clutch One Way Bearing for Can-Am Will come as pictured Replaces OE Part Numbers:420659112 420659111 420659261 420659263 420659260
NEW AFTERMARKET STARTER VTWIN Will come as pictured Part Numbers: 420684560 420684562 420684568 420684566
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 12.1 compression ratio This is a ready to bolt on kit Fits: 2013+ Maverick, Maverick Sport and Commander 1000R Please note this kit will not fit the ATV 1000R or any 1000 engine due to the compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420623566 420623568 420686094 420685244 420296774 420630195 420216352 420216351 420630210
All Balls Racing Fuel Pump Assembly Sending Unit Part number 47-1023 24-71023 1009-0138 Fits: 2006-2008 Outlander/Renegade 500 650 800HO Replaces OEM : 703500771
All Balls Racing Fuel Pump Assembly Sending Unit Part number 47-1026 Fits: 2013-18 Maverick 1000R 2020 and prior Commander 800 1000 1000R Replaces OEM part numbers 709000270 709000362 709000759
New Air filter made by All Balls Racing. This is an OEM replacement filter for early G1 500 650 800HO Outlander or Renegade Please note this will not fit the 800R ATVs Replaces OEM 707800174
New All Balls Racing Engine Air Filter Part number 48-1012 10 inches tall 5 inch diameter Replaces OEM 715900394 Fits 2016-Current Defenders HD5, HD8, and HD10's both 3 and 6 seat machines Fits 2018-Current Maverick Trail 800 and 1000 Fits 2019-Current Maverick Sport 1000
New All Balls Racing fuel sending unit. Part numbers: 47-1027 1009-0128 Will ship as pictured, sending unit, pump, cap and gasket. Replaces part numbers: 709000836 709001056 Found on: Maverick X3 Maverick Sport Maverick Trail If you have fitment questions please let us know, we are here to help.
All Balls dual row tapered wheel bearing Features: High contact double lip seals with armor shield O-rings sealing ID of bearing for superior water and dirt exclusion High performance tapered bearing deliver on average 95% better static load and 86% dynamic load capabilities Hardened steel 52100 and tempered for maximum durability WILL NOT work with the Maverick X3 Replaces: 293350118, 705400088 and 293350040 Unsure on fitment? Here are the dimensions: 30mm Inner Diameter 60mm Outer Diameter 37mm Wide Seal included, not all applications use the seal.
All Balls dual row tapered wheel bearing for Maverick X3 replaces OEM numbers 293350109 293350129 High contact double lip seals with armor shield O-rings sealing ID of bearing for superior water and dirt exclusion High performance tapered bearing deliver on average 95% better static load and 86% dynamic load capabilities Hardened steel 52100 and tempered for maximum durability
Brand NEW aftermarket primary clutch two way bearing with shims Current part number 22-51782 Includes new bearing and two washers This two way bearing service kit includes everything you need to replace the two way bearing on the primary clutch. The thrust washers install on either side of the two way bearing. Replacing this bearing is a great place to start if you experience hard shifting, creeping while in gear or premature belt failure. This kit replaces the two way bearing, 42083235, 420233418 and both thrust washers 420427220 Will not fit mavericks with a rear driveshaft, if you have fitment questions please reach out, we are here to help.- OUT OF STOCK
New aftermarket switch replaces OEM part numbers: 710008837 710005070 710000791 710004618 703500920 710003062 710002883 710003039 710004041 Fits on: 2006-2019 Outlander and Renegades 500 650 800HO 800R 850 1000 1000R 2020 Outlander 650 STD DPS XT XMR 2020 Outlander 6x6 650 or 1000 2020 Renegade 570 XMR Will not work on 400’s or machines with drive by wire. 3 position headlight switch OFF/Low/High beam Will come as pictured Please look at the plug style on your current switch. The buttons may be arranged differently than the switch you are replacing. We have found this switch will work on DPS or non DPS equipped machines 
New IKO, Koyo or NTN brand needle bearing B98 replaces 705500261 If you are unsure on fitment please reach out to us we will help.- OUT OF STOCK
New OEM Blue fuel injector Part Number: 420874402 Will come as pictured 
Set of four Bronco gas shock kit for G1 Outlander 650/800 or Renegade 500/800
These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine.
*Please note these will not work in place of struts found on the Outlander 400/500 machines.
Features:
Bronco gas shocks offer long term consistent performance over stock oil only damped shocks
10% stiffer springs provide a better ride and higher load capacity
Works great on the front to better support your snowplow and on the rear when hauling cargo
Smooth black color blends perfectly on your machine
Direct bolt-on replacement: pre-installed spring allows for quicker setupP/N AU04414X4
Set of four Bronco gas shock kit for G2 2012-2018 Outlander 500/570/650/800/800R/850/1000/1000R or Renegade 500/570/800R/850/1000/1000R
These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine.
*Please note these will not work on the wider 2019+ ATVs.
Features:
Bronco gas shocks offer long term consistent performance over stock oil only damped shocks
10% stiffer springs provide a better ride and higher load capacity
Works great on the front to better support your snowplow and on the rear when hauling cargo
Smooth black color blends perfectly on your machine
Direct bolt-on replacement: pre-installed spring allows for quicker setupP/N AU-04340 AU-04440
Brand New Genuine OEM BRP logo sticker 20mm diameter Part number 516006224 replaces 219902677 704904616
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.