NEW OEM 450 and 570 Outlander keyed ignition switch, and matched keys Two position switch, non DESS Style. This is just on and off. No headlight control. Used on 2017 and newer G2L ATV’s Comes with main key and back up key These are not the electronic black keys, these are cut keys to match the ignition switch Part Number 710007864 replaces 710005153
- OUT OF STOCKNEW OEM Can-Am Maverick X3 Right Sway Bar End Link (Also called RH Ball Joint) Fits RIGHT Front on Can-Am Maverick X3 and X3 MAX's Part Number: 706202765
NEW Bearing and Seal Kit for Can-Am Outlander and Renegade Rear Trailing Arms
They fit G2 Models (2012+)
Replaces part numbers 293350145 706000826 293200132 293200144
This is enough bearings and seals to do both rear arms (some newer models only use half the bearings)
These are high quality KOYO bearings and SKF/Dichtomatik seals.
- Can-am Rubber Trailing Arm cover and Oetiker clamp for your G1 Outlander or Renegade Will only work on the gen 1 Outlander and Renegades 2006-11 and some 2012 models. If you are unsure on fitment, please ask. You will need to order qty 2 to replace both sides. Genuine OEM parts Part Numbers: 706000222 706000749 293650162
- NGK 4339 DCPR8E Standard Plug Fits All G1 ATV's OE numbers: 707000246 715900637 Thread Size: 12mm Thread Pitch: 1.25mm Seat Type: Gasket Resistor Value: 5K Ohm Reach: 19mm (3/4") Hex Size: 5/8" (16mm) Terminal Type: Removable Nut (you will need to remove this for use on G1 ATV's) Gap: .028" (0.7mm) Torque Specs Aluminum: 10.8-14.5 lb. ft. Brand: NGK Heat Range: 8 Longevity: 30k Miles Resistor: Yes Projected Material: Nickel Quantity: 1
NEW OEM CVT cover with heat shield installed from factory
Fits:
Maverick 1000R two seat 2013-2014
Commander 1000 MAX four seat 2014-2016
Commander 800R MAX four seat 2017-2019ONE Breather hole in front of Primary clutch.
This is the cover with the most room. Common to use this on newer V-twin 1000R Mavericks with aftermarket clutches that do not require the extra breathers.
Please match this up with yours before purchasing.
Part number 420612318
Replaces 420612312 420612313 715900257 420975052
Fits G2 ATV’s Outlander or Renegade 500 450 570 650 800 850 1000 1000R
Shift Arm Base Upgrade
Replaces OEM 707003054 707000971 707002439
USA made Made from 6061 T6 Aluminum (aircraft grade)
This plate does not require any additional hardware, use a zip tie to retain the wire harness or vent lines running near it.
- CVT cover set for Turbo V twin Mavericks 1000R Best to pull your cover and visually inspect it for fitment. This cover has two holes over the primary clutch and one over the secondary. If you are unsure on fitment, please contact us! Fits: 2015-2018 Maverick 1000R Turbo 2017-2018 Maverick 1000R XMR Will not fit Maverick X3 Comes with: Maverick Turbo covers inner and outer. CVT Cover Gasket CVT plug PTO O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part numbers 420212285 420611407 420440568
SHIPS FREE TO THE LOWER 48 SATES Can-am 2013 1000R Maverick Commander style CVT covers. This is the 13 bolt cover set. Popular for aftermarket clutch set ups. Only one breather hole in front of the primary clutch works on non Turbo Machines This kit will keep the water out! Comes with: 2013 Maverick 1000R covers inner and outer. CVT Cover Gasket CVT plug PTO O-ring Gear box O-ring Inner CVT Bolts/Nut 13 Cover screws Part Numbers: 420612312 420612313 420611407 420440568
- EPI Bushing Kit, steel inner, plastic outer bushings and shimsFits: G2 Canam ATV’s Outlander or RenegadeDefender and CommanderIf you are unsure on fitment, please contact us before purchasing!Exact replacement components to return your suspension to like-new conditionKits are sold per A-armEPI Part Number: WE341052P/U Part Number: 0430-1029Replaces OEM Part Numbers: 703500875 706202088 706202089 706202133
- OUT OF STOCKCVTech Primary Clutch Holding tool. Very nice tool for torquing nut on the clutch or the bolt holding clutch on to the crankshaft taper. 0155-1018 Part number
- OUT OF STOCKBrand New Moose Utility left or right rear axle Will fit CAN AM Maverick 1000 2013-2015 Low profile stainless steel clamps Engineered in the USA Part Number: 0214-1145 Replaces OE Number: 705501948 705502356