New oem head gasket fits 570 machines, order two per engine Part number: 420630852
New Genuine OEM Mounting kit sold separately Part number 715003814
New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 12.1 compression ratio This is a ready to bolt on kit Fits: 2013+ Maverick, Maverick Sport and Commander 1000R Please note this kit will not fit the ATV 1000R or any 1000 engine due to the compression ratio. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420623566 420623568 420686094 420685244 420296774 420630195 420216352 420216351 420630210
NEW OEM PART Fits 2011 and newer Commander front upper a arm Order two per machine OEM numbers: 706202445
NEW OEM Can-am Defender, Maverick Sport/Trail or Maverick X3 front differential pinion seal. This is pressed into the front differential and seals against the front driveshaft. Measurements are : 79mm outside and 25mm inside 8mm thick Part number 705401827
Brand New Genuine OEM Shifting cable Fits: Two passenger 2018+ Maverick Trail Sport 800 1000 1000R and 2021+ Commander 1000R WILL NOT FIT Four Seat Models or early Commander/Maverick OEM part number 707002000
MOOSE UTILITY Shifter Cable Part Number 0652-2421 Replaces OEM number 707001210 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 53 inches long from end to end Fits two seat models: 2016-2020 Commander 800R 2016-2020 Commander 1000/1000R 2016-2018 Maverick 1000R
New Can Am Outlander Renegade and Commander V-Twin EFI Speedo Speedometer Display Dash 2018-2020 Please understand 2017 and older models require a different dash, even if yours looks the same. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer or you can send in your ecu, key(s), and DPS (power steering) to us for programming. Contact for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710005553
Set of four Moose gas shock kit for G1 Outlander 650/800 or Renegade 500/800 These shocks are the same length on all four corners, you may notice a slight lift, more so on a well used machine. *Please note these will not work in place of struts found on the Outlander 400/500 machines. Features: Moose gas shocks offer long term consistent performance over stock oil only damped shocks 10% stiffer springs provide a better ride and higher load capacity Works great on the front to better support your snowplow and on the rear when hauling cargo Smooth black color blends perfectly on your machine Direct bolt-on replacement: pre-installed spring allows for quicker setup P/N13102146X4
Brand New Genuine OEM CVT Drive Belt for Outlander 400’s Will fit on Traxters and Outlander L 450 Current part number 422280280 Replaces 715900024 Made in USA Will come as pictured
Used ECM (computer) with OEM Digital Key.
This pair is tested, cleared of any codes and run on our shop ATV before leaving. Your Dash (speedometer) may need to be paired with BUDS. If you want to start and run the machine simply unplug the dash before installing the ecu. We provide the pairing service free of charge with purchase of ECU or Dash, contact us for further details.
Only fits Generation 1 ATV Outlander 650 2006 2007 2008 2009
please note 2010 models use a different style ECU, this will not work on 2010 and newer
Part Number: 420266501 420266505 710000817
NEW aftermarket cooling fan for G1 ATV’s Bolt on plug in and go, this is a nice alternative to the OEM Replaces OEM 709200124 709200371 709200313 709200229
All Balls Racing Fuel Pump Assembly Sending Unit Part number 47-1026 Fits: 2013-18 Maverick 1000R 2020 and prior Commander 800 1000 1000R Replaces OEM part numbers 709000270 709000362 709000759
Kit includes one universal boot, one reusable cone tool, two stainless steel clamps, grease pack, and silicone cone lube and instructions Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement Lithium based molybdenum grease ensures good lubrication for long CV joint life XL version of the original EZ Trail boot designed to fit UTVs and large ATVs Material is expandable yet tough enough to be a permanent fix Two clamping diameters ensure a good fit on most vehicles Boot material stays flexible in extreme cold temperatures- Sale!
Brand New Klotz Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. For Can-am off road vehicles with 500cc or larger Vtwin Rotax engines. Excludes Traxter and Quest. Not compatible with Maverick X3 Includes 3 quarts synthetic oil 10W50, 0-ring , Highflow HF152 oil filter, and copper washer for both old style and new style drain plugs. 10w50 oil, great for hot climates, temperature range -13*F to 122*F Will not ship in original box 
NEW OEM BRP Drive Belt. Part number 422280225 This fits the big single cylinder models 2022+ Outlander 700 Outlander HD7 Pro Commander 700 Maverick Trail 700 Defender HD7 Traxter HD7 FITMENT QUESTIONS?? PLEASE ASK! Comes as pictured
NEW OEM Can Am Tool M8x1.25 Tapered Bolt Part number 529036098. This tool fills a few roles, used to open the secondary clutch on many models. This will also lock the crankshaft on Vtwin's and three cylinder models. If you are unsure on application please reach out to us, we are here to help!
Ultra-convenient “all-in-one” oil change kit saves time and money.
Includes XPS Synthetic Blend Oil, oil filter, o-rings and washer.
900 ACE engines found in the Maverick X3 line
SAE 5W-40 4T Oil
Complete oil change kit
Part number 779260
Will not fit Vtwin applications
OEM CVT intake breather P/N 707000777 Will work on 2006 to 2011 can-am v-twins(500,650,800) and 2012 500/650 800MAX Please understand 2012 800 Outlanders are G2 and 2012 Outlander Max 800 are G1 If you are unsure on fitment, please ask us!
G1 2006-2007 atv’s with non reservoir shocks. Your shock body should measure 1.5 inches 25% stiffer over stock springs, great alternative to lift pucks. Rears will retain the factory short spring Will not fit 400/500 struts. WE322010 WE322000
Can Am OEM non power steering stem for G1 Outlander and Renegade 500 650 800HO 800R 2006-2012 Will only work with non power steering bikes Brand New OEM Part number 709400971
New Genuine OEM rear cargo box gas shock Fits 2014-2020 Commander and Commander Max Part Number 708301136
New Genuine OEM 4 Gallon polypropylene injected storage bin Great for storing ropes, tow straps, and winch accessories Easy install (takes just a few minutes) Part number 715003399
DEI (Design Engineering, INC) heat shield kit that reduces temperatures as well as blocking radiant heat in the cup holder and drivers leg area. The mid-engine mounted Commander is prone to heat build up in the cockpit, This is especially true during slow running condition or when a roof and windshield are installed. This 13 piece heat shield kit will reflect and insulate excessive heat entering the cockpit. Installation is straight forward and these adhesive backed durable shields will increase the riding comfort for you and your passenger Blocks heat build up in the cockpit area. Adhesive backed & precision cut Premium heat reflective and insulation shielding Temperature Rating: 1000 F Made in the USA Mfg Part# 902490 010878 607078108784 Product Instructions
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.