MOOSE UTILITY Shifter Cable Part Number 0652-2421 Replaces OEM number 707001210 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 53 inches long from end to end Fits two seat models: 2016-2020 Commander 800R 2016-2020 Commander 1000/1000R 2016-2018 Maverick 1000R
MOOSE UTILITY Shifter Cable Part Number 0652-2422 Replaces OEM number 707001283 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 83 inches long from end to end Fits Four seat MAX models: 2016-2020 Commander MAX 800R 2016-2020 Commander MAX 1000/1000R 2016-2018 Maverick MAX 1000R
MOOSE UTILITY Shifter Cable Part Number 0652-2423 Replaces OEM number 707001809 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 62 inches long from end to end Fits two seat models: 2017-2021 Maverick X3
MOOSE UTILITY Shifter Cable Part Number 0652-2424 Replaces OEM number 707002037 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 95 inches long from end to end Fits four seat MAX models: 2017-2021 Maverick X3 MAX
MOOSE UTILITY Shifter Cable Part Number 0652-2425 Replaces OEM number 707002000 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 60 inches long from end to end Fits: Two passenger 2018+ Maverick Trail Sport 800 1000 1000R and 2021+ Commander 1000R
MOOSE UTILITY Shifter Cable Part Number 0652-2426 Replaces OEM number 707001721 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 145 inches long from end to end Fits four seat MAX models: 2017-2019 Defender HD10/HD8 MAX
MOOSE UTILITY Shifter Cable Part Number 0652-2427 Replaces OEM numbers 707001468 707002227 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 112 inches long from end to end Fits three seat models: 2016-2019 Defender HD10/HD8/Hd5
MOOSE UTILITY Shifter Cable Part Number 0652-2894 Replaces OEM number 707000775 Heavy-duty stainless steel end fittings at both ends for corrosion resistance and longevity Roughly 53 inches long from end to end Fits two seat models: 2011-15 Commander 800R/1000 2013-15 Maverick 1000R
Single forged piston kit with rings, pin and clips, order two per engine
1000R Maverick this is a +1mm bore of the oem 420686094 piston allowing you to re use your factory cylinders with a fresh bore from your local machine shop
This takes your 976 cc 1000R engine to 997 cc
Factory head gaskets work just fine with these pistons no need for special made gaskets
Forged pistons compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Most castings are brittle, have no grain structure and tend to fail catastrophically when the material yield strength is exceeded. Forgings have condensed grain that is aligned to the features of the part, which produces higher mechanical properties, and resistance to impact and fatigue. Each forging is designed to optimize the strength-to-weight ratio, and maximize performance.
12:1 CR (Compression Ratio) same as factory
The piston skirts feature ArmorGlide™ Coating this is the ultimate in skirt coating toughness, lubrication, and bond technology working together to minimize friction, maximize horsepower, and provide improved wear resistance.
All Balls complete module, retaining nut and gasket
This fits many G2L model ATVs please contact us if you have fitment questions.
Part number: 1009-0130 47-1029
Replaces oem number: 709000461
All Balls complete module, retaining nut and gasket This fits many G2 model ATVs please contact us if you have fitment questions. Part number: 1009-0139 47-1024 Replaces OEM numbers: 709000287 709000758
Set of 13 CVT cover screws with the Torx heads. Stainless less likely to rust and strip out inserts. Comes as a set of 13 Part number 420440561 Interchanges with 420440568 420440567
There are a few options for kits, please verify your differential uses this style of gears before ordering!
This will only fit six mounting hole differentials.
Late G1 Early G2 Standard Rear Differential Ring 36t and Pinion 10t gear set Pinion bolt size is M10, this may be different than what you are replacing.
OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured. This kit should be installed by an experienced technician.
Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement. Measure your outer diameter of your axle seals! They should measure close to 1 3/4? (47mm) To further verify fitment you can measure your pinion pilot shaft, this should be 9/16″ (14mm) The pictures show this very clearly. Please take the time to measure your parts before buying this will save time and restocking fees.
Kit includes one universal boot, one reusable cone tool, two stainless steel clamps, grease pack, and silicone cone lube and instructions Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement Lithium based molybdenum grease ensures good lubrication for long CV joint life XL version of the original EZ Trail boot designed to fit UTVs and large ATVs Material is expandable yet tough enough to be a permanent fix Two clamping diameters ensure a good fit on most vehicles Boot material stays flexible in extreme cold temperatures
New XPS SAE 75W-90 and 75W-140 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box 1 U.S QT 946ml per bottle Listing is for 2 Quarts. See your owners manual before ordering to make sure you order the correct weight for your Can Am Part number 779160 and 779158
New XPS SAE 75W-140 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box 1 U.S QT 946ml per bottle Listing is for 2 Quarts. See your owners manual before ordering to make sure you order the correct weight for your Can Am Part number 779160
XPS SAE 75W-90 Synthetic Gear Oil Kit. Enough to do a complete service on the front differential, rear differential, and gear box. 1 U.S QT 946ml per bottle This listing is for 2 quarts See your owners manual before ordering to make sure you order the correct weight for your Can Am 779158
USED Left Upper A-arm will fit 2006-2012 Outlander 650's and 800's. Will work in place of the black steel arms Comes as pictured bare arm
G1 2006-2007 atv’s with non reservoir shocks. Your shock body should measure 1.5 inches 25% stiffer over stock springs, great alternative to lift pucks. Rears will retain the factory short spring Will not fit 400/500 struts. WE322010 WE322000
2008-2012 G1 ATV EPI HEAVY DUTY SPRING SET Your shock body should measure 1.5 inches 25% stiffer over stock springs, great alternative to lift pucks. Will not fit 400/500 struts. WE325107 WE325104
Fits 2011-2013 Commander and Commander MAX Current part number 703500966 Old part number 708300512
Brand New Genuine OEM Shifting cable for two passenger Canam Mavericks and Commanders WILL NOT FIT Maverick Trail/Sport or X3 WILL NOT FIT Four Seat Models Comes as pictured OEM part number 707000775- OUT OF STOCK
New Genuine OEM Fan Current part number 709200566 Old part number 709200373, 709200375 Will fit 2011-Current Commander and Commander Max 
Can Am G2 2012-2018 Outlander XT XTP bumper cap kits Will not fit G1 or G2L models, questions on fitment? Please ask! Comes with 1 Front LEFT or RIGHT Rear cap 1 Backing plate 2 Torx screws Will only work on front right or left rear of machine as you sit on it. All parts are New OEM Part Numbers: 705004409 705004987 250000720
Can Am G2 2012-2018 Outlander XT XTP bumper cap kits Will not fit G1 or G2L models, questions on fitment? Please ask! Comes with 1 Front RIGHT or LEFT Rear cap 1 Backing plate 2 Torx screws Will only work on front right or left rear of machine as you sit on it. All parts are New OEM Part Numbers: 705004410 705004987 250000720
New Maverick rear differential pinion housing nut socket tool. This tool will remove the nut that screws into the aluminum housing. Applying heat to the nut/housing is recommended before using this tool. There is no warranty with this tool. The nut should be left hand threaded, meaning turning counterclockwise will tighten the nut where clockwise will loosen it. Half inch drive socket. It is recommended to only use hand tools with this. Diameter (Exterior) 2 7/8" Diameter (Interior) 2 1/2"
New OEM Shifting Cable For 2014-2015 Commander Max and Maverick Max. Part Number 707001348. 83 Inches From Bolt To Bolt.
New bearing and seal kit for 2014-19 Commanders 800R 1000 or 1000R These are high quality bearings and seals, brands include: Koyo, SKF and Timken This **WILL NOT** work for 2011-2013 Commanders This **WILL NOT** work for with Commanders Equipped with a LOCKING REAR DIFFERENTIAL. This **WILL NOT** work for 2020 Commanders Fits in differentials part numbers: 705502517 705501804 705502096 705502331
New Genuine OEM rear cargo box gas shock Fits 2014-2020 Commander and Commander Max Part Number 708301136
Can Am Maverick 1000R secondary spreader M25x1.5 thread size, to verify fitment 100% measure your clutch where this threads in. This works on the QRS style secondary clutches pictured. This will NOT work on the X3 models Bolt is not included Part number 708200504
Can Am 2016+ Renegade XMR Prefilter Screen This is a OEM prefilter Part # 705010922
Brand New OEM heavy duty spring kit. Stiffens suspension for reduced sag on heavy loads. Not compatible with Defender HD5, XT CAB, Mossy Oak Edition and X mr models, and Defender MAX. Complete set two fronts and two rears.- OUT OF STOCK
New OEM 2019+ rear differential gear set, 10/36 tooth straight cut ring and pinion gear set, Timken seals, NTN or IKO pilot bearing , OEM shim kit and OEM bearings along with a new bolt and washer to retain the driveshaft. BRP claims 25% increase in load capacity on this gear set vs the spiral cut xmr final drive units (rear differentials) from 13-18 models. Fits differential part numbers: 705502808, 705502546, 705502178, 705502090 703501031 705501550 705501556 705501557 
New Genuine OEM Mounting kit sold separately Part number 715003813
Orange Crush matches 2020 and prior models.
All Balls complete fuel pump module, retaining nut and gasket This fits G1 Models: 2009-2015 EFI Outlander 400 2009-2012 Outlander or Renegade 500 2009-2012 Outlander 650 2009-2011 Outlander 800R 2012 Outlander 800R XMR 2012 Outlander 800R MAX 2009-2011 Renegade 800R Part number: 47-1049 24-71022 Replaces OEM numbers: 703500766 703500781 709000194 709000245
Can-am Style Plastic Fender rivet set. NEW Pack of 25 For 8mm (5/16?) holes great for holding plastic fenders together, works on Maverick, Commander, Outlander and Renegade Replaces part numbers 293150089 293150230
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
jared@canampartsguy.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.