-
NEW Take Off G2 Can Am Outlander Fan Taken From ATV With 9.5 Miles. 709200563 replaces 709200317 -
NEW Take Off G2 Can Am ATV Right Front Axle Fits G2 2012-2023 Outlanders 450 500 and 570 and Renegades 500 and 570. Part number 705401428 replaces 705401946 Part Removed From Machine With 9.5 Miles. -
NEW Take Off G2 Can Am ATV Left Front Axle Fits G2 2012-2023 Outlanders 450 500 and 570 and Renegades 500 and 570. Part number 705401429 replaces 705401945 Part Removed From Machine With 9.5 Miles. -
New Can Am Maverick 1000R Rear Differential Replaces Rear differential in any Maverick/Maverick Turbo (non X3/Sport/Trail) Largest and strongest rear differential found in Can-am’s 10/36 Gear set, that is a 3.60:1 ratio, same since at least 2006 Pinion shaft 20 spline Current Part Number 705502275 Old Part Numbers 705501912 705501958 -
Cast aluminum valve cover set with stainless bolts. Pictures of these installed on an engine for reference only. Gaskets are not included. P/N 420630260 is the gasket needed QTY 2 Replaces your factory plastic valve covers on most any G1/G2 2006+ SOHC can-am V-twin ATV or UTV 500/570/650/800/850/1000/1000R If you have aftermarket camshafts you may need to clearance the cover with a dremel. Replaces OE Numbers: 420610390 420610394 420610393 420610395 420630265 420630260 -
NEW Take Off G2 Can Am Outlander Renegade Right Rear Axle Part number 705501486 replaces 705502473 Axle Removed From Machine With 9.5 Miles. -
New Take Off G2 Can Am Outlander Outer Clutch Cover CVT cover 420611397 replaces 420611395 420611394 Gasket included part number 420430126. Used on G2 Can AM Outlander Renegade 570 650 800R 850 & 1000. -
New take off left trailing arm assembly with bearings and bushings. This was removed from a 2016 Outlander 570 DPS Fits many G2 ATV from 2012-2016. Will replace the newer stamped style also. If you have fitment questions please reach out. Trailing arm part number 706001860 Includes bearings, seals and bushings as pictured. -
Sale!
Complete Brake Rotor and Pad kit for the Maverick X3 Two OEM BRP rear rotors part number 705601840 Two OEM BRP front rotors part number 705601841 Two DP Brakes DP572 Two DP Brake DP573 DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads -
NEW Genuine OEM BRP Part.Rear Brake rotor, installs on left or right.Part number 705601840 replaces part number 705601376248mm outer diameter, this is 9 3/4" -
NEW Genuine OEM BRP Part.Front Brake rotor, installs on left or right. Part number 705601841 replaces part number 705601533262mm outer diameter, this is just over 10 1/4" -
NEW OEM BRP LH Knuckle
Current Part Number 705403307Replaces 705401178 705401290 705402904
Fits G2 ATVs Outlander Renegade and Outlander L
Right side is the throttle side. This is a Left side knuckle
-
NEW OEM Key Post Part number 710008832 This is used on many 2023 and newer models. Please reach out if you have fitment questions. -
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit. BRP part number 9779257 is a 4T 0W-40 Synthetic Oil Change kit designed for Rotax engines 450cc or less. Ultra convenient “all in one” kit saves time and money. Oil Grade 0W-40 This XPS oil provides superior engine and transmission protection against heat, rust and corrosion. Ambient temperature operating range: -49°F / 104°F (-45°C / 40°C). This oil is suitable for extremely cold conditions. For Can-am off road vehicles with the Rotax SOHC (Single Over Head Cam) single cylinder liquid cooled engine, marketed as "400", “450” or “HD5” This fits: 2006-2014 Outlander/Outlander MAX 400 (400cc) 2015-2023 Outlander/Outlander MAX 450 (427cc) 2017-2021 Defender HD5 (427cc) Excludes DOHC (Dual Over Head Cam) Defender HD5 (650cc) 2026+ and Outlander HD5 (650cc) 2024+ If you have fitment questions please reach out! Includes three quarts and one 16oz bottle of 4T synthetic oil, o-rings, rotax oil filter, and drain plug crush washer. May not ship in original box Part Number: 9779257 for the kit 420256188 oil filter 420230923 housing o ring 420552280 m18 crush washer 9779139 is the oil in quart size retail packaging these are bulk XPS jugs. -
NEW OEM Handle bar Light Blue Aluminum tapered bars Part number 709401644 7/8’’ ends to 1 1/8’’ center (22 mm – 28 mm) tapered handlebar made of 6061-T6 aluminum. You will need 1 1/8" clamps to mount this to your steering stem. -
NEW OEM Handle bar Red Aluminum tapered bars Part number 709401643 7/8’’ ends to 1 1/8’’ center (22 mm – 28 mm) tapered handlebar made of 6061-T6 aluminum. You will need 1 1/8" clamps to mount this to your steering stem. -
OUT OF STOCK
NEW Moose Offroad Handlebar Black Aluminum tapered bars Part number 0601-6812 Replaces Oem Part numbers 709400513 709401530 709401644 709401643 7/8’’ ends to 1 1/8’’ center (22 mm - 28 mm) tapered handlebar made of 6061-T6 aluminum. You will need 1 1/8" clamps to mount this to your steering stem. OEM replacement handlebars for ATV Made from .083 tubing Made in the USA -
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. Oil Grade 5W-40 This XPS oil provides superior engine and transmission protection against heat, rust and corrosion. Ambient temperature operating range: -31°F / 104°F (-35°C / 40°C). For Can-am off road vehicles with the 650cc Rotax DOHC (Dual Over Head Cam) ACE single cylinder liquid cooled engine, marketed as "700" or "HD7" This fits: 2023+ Outlander 500/700 2023+ Outlander PRO HD5/HD7 2022+ Commander 700 2022+ Defender HD7 2022+ Maverick Trail 700 Excludes SOHC (Single Over Head Cam) Traxter and Quest HD5 Defender 2021 or older. If you have fitment questions please reach out! Includes two quarts and one 16oz bottle of 4T synthetic oil, o-rings, rotax oil filter, and drain plug crush washer. May not ship in original box Part Number: 9779480 for the kit 420256188 oil filter 420230922 housing o ring 420552280 crush washer 9779492 is the oil in quart size retail packaging these are bulk XPS jugs. -
NEW Take Off 3 wire 4x4 Servo Actuator This fits machines that use a sensor on the gearbox to verify 4x4 condition. Fits all G1 vtwins (400's require a fork swap) Fits 2012-18 G2 500/570/650/800R/850/1000/1000R machines. Taken From Machine With 9.5 Miles. Part number 415129174 -
NEW Take Off G2 ATV Fuel Tank Fits 2012-18 Can Am Outlander/Renegade 500/570/650/800R/850/1000/1000R Part Number 709000310 Taken From a 2016 Outlander 570 G2 With 9.5 Miles. -
Brand New OEM Can Am 2025 2026 iTC (Intelligent Throttle Control) Outlander Renegade Electronic Throttle Actuator and 4x4 Switch Housing This is for models with with iEB (Intelligent Engine Braking) and Visco-4Lok (electronically locking front differentials) Please contact us if you are unsure on fitment, we are here to help! Part Number 710010573 -
Part number 715009284 2023+ G2 outlanders G3/G3L outlanders Please contact us if you are unsure of fitment. Heat levels for grips and thumb displayed on vehicle screen. Ergonomic button integrated on LH grip. Single button for both grips and thumb heat selection.* Five temperature settings for the thumb and grips. Adjustable heat ratio between grip and thumb warmer.* Hold button to reach maximum heat quickly. Remembers your last heat setting. IP67-rated waterproof sealing keeps the elements out. ECE compliant. Plug-and-play installation. Clamp-on grips, no glue required. *Models with touchscreen or color display provide enhanced user interface with independent grips and thumb heat level selection -
New OEM BRP Defender Snorkel kit. Part number 715003727 Standard on Defender X mr models. Raises point of engine and CVT air intakes so vehicle can be semi-submersed in water / mud without taking in water to the engine. Not compatible with Defender Limited, Defender HD5 or Defender PRO. Not compatible with Headache Racks, Gear Rail equipment, DragonFire Cargo Bed Roll Bar and Windshield Wiper and Washer Kit. On model year 2016 2017 and 2018 , for better performance it is strongly recommended to change the airbox for the new sealed airbox (707800714) this change requires the new air intake adaptor (707800759). -
NEW OEM BRP RH Knuckle Current Part Number 705403308 Replaces 705401179 705401291 705402905 705403199 Fits G2 ATVs Outlander Renegade and Outlander L Right side is the throttle side. -
NEW OEM Center Differential upgrade kit for 2014-2018* Outlander 6X6 650 or 1000 models. Your 18 spline input final drive rear differential remains the same with this kit. 703500990 Forward Rear Shaft (connects gearbox to center diff) this has 20 spline end yokes* 705503692 Improved Middle Differential replaces 705503088. 703501084 Rear Rear Shaft (connects center diff to rear diff) this has a 20 spline center diff end yoke and a 18 spline rear differential end yoke. Two aftermarket M10 Bolts and washers these retain the new shafts to the center differential. Torque spec for these is 55 FTLBS with 648 green loctite, red also is acceptable. Aftermarket Bellows and clamp included, this keeps a slight amount of positive pressure inside the center differential, superior to a vent line. *If you have a 2018 Outlander 6x6 650 CE T3 model please verify you have the large gearbox and short wheelbase. If you have fitment questions please reach out, we are here to help! -
New Can Am Multifunction Gauge MID Speedometer Display Dash fits select 2024 2025 2026 G3 Outlander/Outlander MAX 850/1000R models Please understand models outside of this year range may look similar but require a different part number, if you have any fitment questions please reach out prior to ordering. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer please contact us for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710008297 -
New Can Am Multifunction Gauge Compact Speedometer Display Dash Select 2022 and 2023 models Please understand models outside of this year range may look similar but require a different part number, if you have any fitment questions please reach out prior to ordering. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer please contact us for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710008108 -
New Can Am Multifunction Gauge MID Speedometer Display Dash for various 2021 2022 2023 models Please understand models outside of this year range may look similar but require a different part number, if you have any fitment questions please reach out prior to ordering. This is the factory Gauge/Screen. The dash is designed to auto pair, but sometimes it will not auto pair and you will have to program them together with buds software. This can be done at your local dealer please contact us for more information. It will display 0 miles, please record your current miles for your records. Current Part number: 710007409 -
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. Oil Grade 0W-40 This XPS oil provides superior engine and transmission protection against heat, rust and corrosion. Ambient temperature operating range: -49°F / 104°F (-45°C / 40°C). For Can-am off road vehicles with the 650cc Rotax DOHC (Dual Over Head Cam) ACE single cylinder liquid cooled engine, marketed as "700" or "HD7" This fits: 2023+ Outlander 500/700 2023+ Outlander PRO HD5/HD7 2022+ Commander 700 2022+ Defender HD7 2022+ Maverick Trail 700 Excludes SOHC (Single Over Head Cam) Traxter and Quest HD5 Defender 2021 or older. If you have fitment questions please reach out! Includes two quarts and one 16oz bottle of 4T synthetic oil, o-rings, rotax oil filter, and drain plug crush washer. May not ship in original box Part Number: 9779481 for the kit 420256188 oil filter 420230922 housing o ring 420552280 crush washer 9779139 is the oil in quart size retail packaging these are bulk XPS jugs. -
NEW Take Off G2 Can Am Outlander Crankshaft Position Sensor 420966570 Please ask if you have fitment questions, we are here to help! Removed From Machine With 9.5 Miles. -
MOOSE OFFROAD Crankshaft Position Sensor Replaces OEM numbers 420966570 420431580 This fits a wide range of canam's since 2003, please reach out to us if you are unsure of fitment -
300M Demon Xtreme Heavy Duty Race Spec Ball Joint This fits upper arms, on many applications. If you have fitment questions please contact us! 2012-2025 G2/G2L/G3/G3L Outlander 500/570/650/700/800R/850/1000/1000R 2012-2025 G2 Renegade 500/570/650/800R/850/1000/1000R 2013-2018 Maverick 1000R/1000R Turbo 2017-2025 Maverick X3 Turbo/Turbo R/Turbo RR/non turbo 2019-2025 Maverick Sport 1000R 2018- 2025 Maverick Trail 800/1000 2016-2025 Defender HD5 HD7 HD8 HD9 HD10 2011-2025 Commander 700/800R/1000 2024-2025 Maverick R (please note this is installed in the upper, and may affect tire clearance) Demon Part number PABJ-5008XHD Replaces OE part numbers 703501264 706202044 706203084 706202801 706201575 706201394 706201370 This design eliminates the snap ring, opting for a threaded chromoly body for secure ball joint retention. Constructed from 300M stud and dual heat-treated 4340 chromoly steel body and finished with zinc plating. This ball joint is adjustable, rebuildable, and greaseable, maintaining smooth operation for years to come. Warranty for Xtreme Heavy Duty Ball Joint Race Spec Demon Powersports warrants its Demon Xtreme Heavy Duty Ball Joints to the original purchaser for a lifetime period from the date of purchase against manufacturing defects in workmanship and material only. Demon Powersports’ warranty does not apply to failures resulting from misuse, negligence, accidents, improper application, improper installation, alteration, or lack of reasonable or proper maintenance, or if the machine is used in racing or commercial applications. This warranty does not cover normal wear and tear items such as gaskets, seals, boots, bearings, bushings, and rotors. Demon Powersports does not cover the cost of removal and reinstallation of any kind. -
Rear Knuckle Radial Joint for Maverick X3 made by Precision MotoSports Replaces OEM part number 706002317 This joint is made of 4130 chromoly with PTFE These joints eliminate the common failure points found in OEM bushings and cheap aftermarket options. -
NEW OEM CVT air outlet.
This fits G2 ATVs, please contact us if you are unsure of fitment.
Part number 706600415 replaces 706600019 706600412
-
Rear Knuckle Radial Joint for Maverick R made by Precision MotoSports This joint is made of 4130 chromoly with PTFE These joints eliminate the common failure points found in OEM bushings and cheap aftermarket options. -
Upper shock bushing for Maverick R made by Precision MotoSports This joint is made of 4130 chromoly with PTFE FOX shock replacement bushing These are pressed in, just like OEM reuse your retaining clips These joints eliminate the common failure points found in OEM bushings and cheap aftermarket options.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
canampartsguy@gmail.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.