-
NEW Take Off G2 Can Am Outlander Fan Taken From ATV With 9.5 Miles. 709200563 replaces 709200317 -
NEW Take Off G2 Can Am ATV Right Front Axle Fits G2 2012-2023 Outlanders 450 500 and 570 and Renegades 500 and 570. Part number 705401428 replaces 705401946 Part Removed From Machine With 9.5 Miles. -
NEW Take Off G2 Can Am ATV Left Front Axle Fits G2 2012-2023 Outlanders 450 500 and 570 and Renegades 500 and 570. Part number 705401429 replaces 705401945 Part Removed From Machine With 9.5 Miles. -
New Can Am Maverick 1000R Rear Differential Replaces Rear differential in any Maverick/Maverick Turbo (non X3/Sport/Trail) Largest and strongest rear differential found in Can-am’s 10/36 Gear set, that is a 3.60:1 ratio, same since at least 2006 Pinion shaft 20 spline Current Part Number 705502275 Old Part Numbers 705501912 705501958 -
Cast aluminum valve cover set with stainless bolts. Pictures of these installed on an engine for reference only. Gaskets are not included. P/N 420630260 is the gasket needed QTY 2 Replaces your factory plastic valve covers on most any G1/G2 2006+ SOHC can-am V-twin ATV or UTV 500/570/650/800/850/1000/1000R If you have aftermarket camshafts you may need to clearance the cover with a dremel. Replaces OE Numbers: 420610390 420610394 420610393 420610395 420630265 420630260 -
NEW Take Off G2 Can Am Outlander Renegade Right Rear Axle Part number 705501486 replaces 705502473 Axle Removed From Machine With 9.5 Miles. -
New Take Off G2 Can Am Outlander Outer Clutch Cover CVT cover 420611397 replaces 420611395 420611394 Gasket included part number 420430126. Used on G2 Can AM Outlander Renegade 570 650 800R 850 & 1000. -
New take off left trailing arm assembly with bearings and bushings. This was removed from a 2016 Outlander 570 DPS Fits many G2 ATV from 2012-2016. Will replace the newer stamped style also. If you have fitment questions please reach out. Trailing arm part number 706001860 Includes bearings, seals and bushings as pictured. -
Sale!
Complete Brake Rotor and Pad kit for the Maverick X3 Two OEM BRP rear rotors part number 705601840 Two OEM BRP front rotors part number 705601841 Two DP Brakes DP572 Two DP Brake DP573 DP Brakes Brake Pads are designed with sintered metal compounds to give your SXS high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads -
NEW Genuine OEM BRP Part.Rear Brake rotor, installs on left or right.Part number 705601840 replaces part number 705601376248mm outer diameter, this is 9 3/4" -
NEW Genuine OEM BRP Part.Front Brake rotor, installs on left or right. Part number 705601841 replaces part number 705601533262mm outer diameter, this is just over 10 1/4" -
NEW OEM BRP LH Knuckle
Current Part Number 705403307Replaces 705401178 705401290 705402904
Fits G2 ATVs Outlander Renegade and Outlander L
Right side is the throttle side. This is a Left side knuckle
-
NEW OEM Key Post Part number 710008832 This is used on many 2023 and newer models. Please reach out if you have fitment questions. -
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit. BRP part number 9779257 is a 4T 0W-40 Synthetic Oil Change kit designed for Rotax engines 450cc or less. Ultra convenient “all in one” kit saves time and money. Oil Grade 0W-40 This XPS oil provides superior engine and transmission protection against heat, rust and corrosion. Ambient temperature operating range: -49°F / 104°F (-45°C / 40°C). This oil is suitable for extremely cold conditions. For Can-am off road vehicles with the Rotax SOHC (Single Over Head Cam) single cylinder liquid cooled engine, marketed as "400", “450” or “HD5” This fits: 2006-2014 Outlander/Outlander MAX 400 (400cc) 2015-2023 Outlander/Outlander MAX 450 (427cc) 2017-2021 Defender HD5 (427cc) Excludes DOHC (Dual Over Head Cam) Defender HD5 (650cc) 2026+ and Outlander HD5 (650cc) 2024+ If you have fitment questions please reach out! Includes three quarts and one 16oz bottle of 4T synthetic oil, o-rings, rotax oil filter, and drain plug crush washer. May not ship in original box Part Number: 9779257 for the kit 420256188 oil filter 420230923 housing o ring 420552280 m18 crush washer 9779139 is the oil in quart size retail packaging these are bulk XPS jugs. -
NEW OEM Handle bar Light Blue Aluminum tapered bars Part number 709401644 7/8’’ ends to 1 1/8’’ center (22 mm – 28 mm) tapered handlebar made of 6061-T6 aluminum. You will need 1 1/8" clamps to mount this to your steering stem. -
NEW OEM Handle bar Red Aluminum tapered bars Part number 709401643 7/8’’ ends to 1 1/8’’ center (22 mm – 28 mm) tapered handlebar made of 6061-T6 aluminum. You will need 1 1/8" clamps to mount this to your steering stem. -
OUT OF STOCK
NEW Moose Offroad Handlebar Black Aluminum tapered bars Part number 0601-6812 Replaces Oem Part numbers 709400513 709401530 709401644 709401643 7/8’’ ends to 1 1/8’’ center (22 mm - 28 mm) tapered handlebar made of 6061-T6 aluminum. You will need 1 1/8" clamps to mount this to your steering stem. OEM replacement handlebars for ATV Made from .083 tubing Made in the USA -
Brand New Genuine OEM XPS Full Synthetic Oil Change Kit. Ultra convenient “all in one” kit saves time and money. Oil Grade 5W-40 This XPS oil provides superior engine and transmission protection against heat, rust and corrosion. Ambient temperature operating range: -31°F / 104°F (-35°C / 40°C). For Can-am off road vehicles with the 650cc Rotax DOHC (Dual Over Head Cam) ACE single cylinder liquid cooled engine, marketed as "700" or "HD7" This fits: 2023+ Outlander 500/700 2023+ Outlander PRO HD5/HD7 2022+ Commander 700 2022+ Defender HD7 2022+ Maverick Trail 700 Excludes SOHC (Single Over Head Cam) Traxter and Quest HD5 Defender 2021 or older. If you have fitment questions please reach out! Includes two quarts and one 16oz bottle of 4T synthetic oil, o-rings, rotax oil filter, and drain plug crush washer. May not ship in original box Part Number: 9779480 for the kit 420256188 oil filter 420230922 housing o ring 420552280 crush washer 9779492 is the oil in quart size retail packaging these are bulk XPS jugs. -
NEW Take Off 3 wire 4x4 Servo Actuator This fits machines that use a sensor on the gearbox to verify 4x4 condition. Fits all G1 vtwins (400's require a fork swap) Fits 2012-18 G2 500/570/650/800R/850/1000/1000R machines. Taken From Machine With 9.5 Miles. Part number 415129174 -
NEW Take Off G2 ATV Fuel Tank Fits 2012-18 Can Am Outlander/Renegade 500/570/650/800R/850/1000/1000R Part Number 709000310 Taken From a 2016 Outlander 570 G2 With 9.5 Miles. -
Brand New OEM Can Am 2025 2026 iTC (Intelligent Throttle Control) Outlander Renegade Electronic Throttle Actuator and 4x4 Switch Housing This is for models with with iEB (Intelligent Engine Braking) and Visco-4Lok (electronically locking front differentials) Please contact us if you are unsure on fitment, we are here to help! Part Number 710010573 -
Part number 715009284 2023+ G2 outlanders G3/G3L outlanders Please contact us if you are unsure of fitment. Heat levels for grips and thumb displayed on vehicle screen. Ergonomic button integrated on LH grip. Single button for both grips and thumb heat selection.* Five temperature settings for the thumb and grips. Adjustable heat ratio between grip and thumb warmer.* Hold button to reach maximum heat quickly. Remembers your last heat setting. IP67-rated waterproof sealing keeps the elements out. ECE compliant. Plug-and-play installation. Clamp-on grips, no glue required. *Models with touchscreen or color display provide enhanced user interface with independent grips and thumb heat level selection -
New OEM BRP Defender Snorkel kit. Part number 715003727 Standard on Defender X mr models. Raises point of engine and CVT air intakes so vehicle can be semi-submersed in water / mud without taking in water to the engine. Not compatible with Defender Limited, Defender HD5 or Defender PRO. Not compatible with Headache Racks, Gear Rail equipment, DragonFire Cargo Bed Roll Bar and Windshield Wiper and Washer Kit. On model year 2016 2017 and 2018 , for better performance it is strongly recommended to change the airbox for the new sealed airbox (707800714) this change requires the new air intake adaptor (707800759). -
NEW OEM BRP RH Knuckle Current Part Number 705403308 Replaces 705401179 705401291 705402905 705403199 Fits G2 ATVs Outlander Renegade and Outlander L Right side is the throttle side.
Have Questions?
Our staff is available to answer questions
canampartsguy@gmail.com
1340 Okray Ave.
Plover, WI 54467
canampartsguy@gmail.com
Cant find What you're looking for?
Visit our 
store!
2016 Can Am Parts, LLC. All rights reserved.