Renegade

  • Orange wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450 Both are brand new. Part numbers 715003813 & 715001378 Orange Crush matches 2020 and prior models.

  • OUT OF STOCK
    Brand New Genuine OEM Start/Stop Switch This is the new up to date switch Brand New still in original box Will come as pictured Works on many V-twin ATV’s Renegades and Outlanders will not work on 400’s please look at the plug style on your current switch. The buttons may be arranged differently we have found they will work on all V-twins DPS or non DPS 2006 to 2012. Part number 710000791 710004618
  • SHIPS FREE TO THE LOWER 48 STATES Black and Yellow wrap around wind deflector set with mounting kit. This is not sunburst yellow, this is the older yellow. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715000525 & 715001378
  • New Genuine OEM Part number 715001706 Mounting kit sold separately
  • Updated Can-am Rear G2 Driveshaft Fits: 2019+ Outlander 1000R (excluding MAX and XMR) 2019+ Outlander 650/850 (excluding MAX) 2019+ Renegade 650/850 All new all OEM Shaft OEM U-joints. OEM protector ring installed Gearbox side yoke swapped to 18 spline Current Part number: 703500988 Previous Part number: 703500858 703500931 If you have a 2019+ 570  short wheel base single rider, this may be the correct shaft for your application, the parts fiche may not show the correct part number. You will need to measure the outer diameter of your rear differential's pinon seal, this shaft will only work with machines that have a 80mm pinion seal. If you measure 70mm you will need 703500986. 20 spline differential side yoke (fits 705502808/705502546 rear differential) 18 spline gearbox side yoke (small gearbox size) No wear ring needed, the deferential side yoke is machined to the outer diameter that a wear ring would be.
  • NEW OEM Shock Heat Shield

    This helps keep heat from the exhaust melting your bump stop in your shock.

    Current part number 705210324 replaces 705209688

    ATVs equipped with piggy-back reservoir type shocks will need to cut the bracket to clear the shock. These are made for use with the standard black bodied shocks.
  • SHIPS FREE TO THE LOWER 48 STATES New Engine Top End Gasket Set by Moose Racing Fits 500 and 650 Machines Comes with: Cylinder Base Gaskets Cylinder Head Gaskets Valve Stem Seals Valve Cover Gaskets Injector Seals Intake Gaskets and Seals Exhaust Gaskets Thermostat O-Rings Coolant O-Rings Tensioner O-Rings Moose Racing gaskets are made to the same high quality standards as OEM gaskets Part number 0934-3016
  • Red wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715006118 & 715001378

  • New Aftermarket 1000/1000R Crankshaft with Connecting rods and bearings. No core needed, ready to install. *Will not fit Defender Maverick Sport/Trail* Replaces OE parts: 420219735 420219736 420217556 420217559 420641477 420641475 420233726
  • SHIPS FREE TO THE LOWER 48 STATES NEW OEM Canam Cam Chain and Guide Set  for V Twin 1000 Order QTY 1 (one) per engine. Kit includes: 2 Silent Chains 420297068 2 Pivot Guides 420436017 2 Fixed Guides 420236583 2 Bottom Guides 420236350 ONLY WORKS WITH 1000 V TWINS To install the timing chain kit you will need to remove the PTO Cover, Stator  Cover, and cylinder heads. We sell the gaskets and pullers required to do this.  Check our other listings for these products
  • NEW Can Am OEM Cam Timing Tool For holding the cam in place for timing and tightening camshaft sprocket bolts For easy installation of new timing chains or just setting timing. OEM Number 529036268 replaces 529036231
  • Right Front for G1 ATV One Caliper Set DP Brakes Brake Pads are designed with sintered metal compounds to give your ATV high-tech performance in all conditions Pads have a quick break-in period so you get maximum performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Sintered metal compounds outlast more conventional organic or aramid fiber pads   Replaces OEM 705600350 705600004
  • Brand: Can-Am Part Number: 710004567
      • Required for installation of Heated Hand Grips & Throttle Combo.
     
    • Fits: (G2L) 2015-2016 Can-Am Outlander L 450, 2015 Can-Am Outlander L 500, 2016 Can-Am Outlander L 570, 2015-2016 Can-Am Outlander L Max 450, 2015 Can-Am Outlander L Max 500, 2016 Can-Am Outlander L Max 570, 2017-2020 Can-Am Outlander 450, 2017-2020 Can-Am Outlander 570, 2019-2020 Can-Am Outlander Max 450 6x6
  • New aftermarket 91mm bore piston and cylinder kit with gaskets rings wrist pins and circlips 10.3 compression ratio This is a ready to bolt on kit, this will work with 800HO 800R and 650 engines. If you install this on a 650 you will need to have your ecu flashed or a inline tuner installed. No dowel pins included, you will need to transfer these from your engine Replaces OEM Part Numbers: 420296775 420685714 420613586 420296774 420216270 420845106 420630210
  • NEW OEM Speedometer trim  found on Renegade XMR models. Part number 705015189
  • Can-am Rear Driveshaft G2 2019+ G2 Renegade 1000R base, XXC or XMR All New All OEM Shaft OEM U-joints, with OEM gearbox seal protector installed. **Please note, this is the most updated shaft and does not require a wear ring on the differential side of the shaft. The last two pictures illustrate this.** 20 Spline Gearbox side yoke (fits large type gearboxes) 20 Spline Differential side yoke (fits fits 705502808/705502546 rear differential) Current Part number: 703500990 Previous Part number: 703500928 703500901
  • New G2 dual piston front right brake caliper with OEM pads. Fits G2 Renegade and Outlander 2012-2019 Genuine OEM part. Part number 705602188 replaces 705600861
  • Red wrap around wind deflector set with mounting kit. Fits Outlander, Renegade, & DS450. Both are brand new. Part numbers 715003811 & 715001378

  • Six Weights 24 gram each for CVtech Trailbloc Primary Part numbers: 0935-2010 or 0901-7110
  • New Can Am ATV 800 Standard Ratio Small Gear Box / Transmission Will work on all Can-am Vtwin 500/570/650/800/850 Both Outlander or Renegade.
    • New Can-Am GEAR BOX
    • Current Part Number- 420686714
    • Replaces: 420684780, 420685391, 420685392, 420685394, 420685396, 420685397
    • NEW OEM Canam Part NOT A REBUILD, ALL NEW
    • This is the Standard Ratio gearbox for any 500/570/650/800/850 v twin Can-am, Renegade or Outlander.
    2015 and newer non XMR outlander 1000/1000R have this style gearbox, if you have fitment questions, please contact us! Teeth count and gear ratio Ring & Pinion 32/13 = 2.462 High Gear set 34/29 = 1.172 Low Gear set 43/20 = 2.150 High final ratio 2.88:1 Low final ratio 5.29:1 Driveshaft bolt not included; this may be a different size from your current bolt.
  • Can Am Maverick X3 secondary clutch spreader tool This is a OEM tool Part number 708200720
  • New OEM Engine Case Half Gasket. Fits most G2 Can-Am V-Twin Engines. This is for the longer stroke (75mm) cases. Old Part Number: 420651225 New Part Number: 420651227
  • CVtech Spring Gold/Pink/Pink 400-1200 rate 0951-1025